Ilsco TaskMaster TM-CUT45 Bedienungsanleitung

Instruction manual

Model: TM-CUT45

Read and understand all of the instructions and

safety information in this manual before operating

or servicing this tool.

TASKMASTER TOOLS

4730 Madison Road

Cincinnati OH 45227

www.ilsco.com

Phone:

800-776-9775

513-533-6200

TM-CUT45

Table of Contents

Warranty and Servicing.......................................................................................................................................................3

Safety Symbols........................................................................................................................................................................3

Safety..........................................................................................................................................................................................4

Technical Specications......................................................................................................................................................5

Identication...........................................................................................................................................................................6

Operating Instructions.....................................................................................................................................................7-8

Tool Maintenance..................................................................................................................................................................9

Tool Parts Breakdown........................................................................................................................................................10

Parts List.................................................................................................................................................................................11

Head Assembly Breakdown and Parts List.................................................................................................................12

Thank you...

for buying a TASKMASTER TOOL. Our mission is to bring product innovation and exceptional

customer service to the marketplace. This tool line is reliable, dependable, and durable for our

customer’s needs.

Please read this instruction manual carefully before using the product. If you have any questions

about our product please reach out to our customer service department (see back cover). No part

of the contents of this manual may be reproduced, transmitted or circulated in any form or by any

means without the prior written authorization of TASKMASTER TOOLS.

TM-CUT45

SAFETY SYMBOLS

Do not dispose

of product.

Please recycle

Electric Shock

Hazard- use

proper protective

equipment

Attention!

Risk of

cutting injury

Never use

with unlocked

workhead

Read the operating

instructions

before use

Wear protective

goggles

WARRANTY AND SERVICING

TASKMASTER PRO 5-Year Tool Service Protection Program

Introducing the industry’s best service & support program for all your ILSCO hydraulic crimping and

cutting tools. All ILSCO tool buyers are automatically registered in the TASKMASTER PRO Service

Protection Program and will receive free tool repairs for defects in material or workmanship on their

tool(s) for ve years after their original purchase date. (Excludes abuse, non-intended use, tampered

with or normal wear and tear.)

TASKMASTER PRO Tool 5-Day Repair Pledge

If your tool(s) need repair at any time within ve years of your original purchase date, our

TASKMASTER PRO service network will repair your registered tools within ve business days of

receipt.

TASKMASTER PRO Tool Loaner Program

If you need a replacement tool during any repair, our TASKMASTER PRO network can typically

provide a comparable loaner tool to registered tool owners while your tool is being repaired.

FREE Tool Reconditioning

Your rst reconditioning is on us!

To Find a TASKMASTER PRO Service Partner

Call ILSCO for assistance in solving tool performance issues or for any of your service needs.

ILSCO tool owners will be oered options to solve any tool replacement, parts or repair

issues.

Call 513-533-6200 or 800-776-9775

Monday to Friday

8:00AM to 5:00PM Eastern Time (ET)

TM-CUT45

SAFETY

Read all safety warnings, instructions provided with this tool. Failure to follow all

instructions listed below may result in electric shock, re and/or serious injury. Save all

warnings and instructions for future reference.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.

• Keep children and bystanders away while operating a hydraulic tool. Distractions can

cause you to lose control.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a

hydraulic tool. Do not use a hydraulic tool while you are tired or under the inuence

of drugs, alcohol, or medication. A moment of inattention while using hydraulic tools

may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection. Protective

equipment such as rubber gloves, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce personal injuries.

• Do not overreach. Keep proper footing and balance at all times. This enables better

control of the tool in unexpected situations.

• Do not let familiarity gained from frequent use of hydraulic tools allow you to

become complacent and ignore tool safety principles. A careless action can cause

severe injury within a fraction of a second.

SERVICE

• Have your tool serviced by a qualied repair person using only identical replacement

parts. This will ensure that the safety of the hydraulic tool is maintained.

TM-CUT45

TECHNICAL SPECIFICATIONS

Force developed: 6.7 tons

Jaw Opening: 1.77 in.

Hydraulic oil: Shell Tellus S2 V 15

Dimensions: 23.6 in. x 2.7 in. x 7.3 in. (L x W x H)

Weight: 12.5 lbs

Cut Capacity

CU Conductor: 1.5 in.

AL Conductor: 1.7 in.

ACSR: 1590kcmil

Guy wire: 5/8 in.

Guy wire (EHS): 1/2 in.

Ground rod: 5/8 in.

Rebar: #4 (1/2 in.) Grade 40

For Grade 60, consult factory

7.3 in. (185 mm)

23.6 in. (599 mm)

TM-CUT45

Head locking pin

Serial number

Stationary handle

Pump handle

Release button

Movable blade

IDENTIFICATION







NOTE: Includes molded carrying case.





TM-CUT45

OPERATING INSTRUCTIONS

Be sure to read instructions carefully, wear safety goggles, and keep ngers away from cutting

head.

ADVANCING & RETRACTING

1. To advance the tool, lift and lower the pump handle.

2. To retract the tool, twist pump handle completely, then push handles together until blade is

fully retracted.

CUTTING

1. Make sure the blade is fully retracted.

2. Pull head locking pin to open head.

3. Close head and secure locking pin in place. Be sure tool head is completely locked before

cutting or damage will occur.

CAUTION: always wear eye protection

while cutting

WARNING: Hardened material can y

when cutting. Always point away from

people or objects

TM-CUT45

4. Make sure all cuts are made perpendicular to the cutting head or damage will occur to blades.

5. Advance the blade by lifting and lowering the pump handle.

6. Once cutting cycle is complete, twist pump handle then push handles together until blade is

fully retracted.

NOTE: Your tool is equipped with a safety bypass. When maximum pressure is achieved, you

will hear a pop.

TM-CUT45

TOOL MAINTENANCE

Daily maintenance:

• After each cutting cycle wipe the cutting head jaws free of metal shavings.

• Wipe down all steel parts with WD-40.

• Store the tool in a non-humid environment.

The tool should provide many years of service when given the proper maintenance and care.

Should you experience any diculty with the operation and maintenance of this tool, contact our

customer service department (see back cover).

TM-CUT45

TOOL PARTS BREAKDOWN

Inhaltsverzeichnis

Andere Ilsco Cutter Handbücher

Ilsco

Ilsco TaskMaster TB-CUT25-I Bedienungsanleitung

Ilsco

Ilsco TaskMaster TR-CUT120CU Bedienungsanleitung

Ilsco

Ilsco TaskMaster TB-CUT85CU-P Bedienungsanleitung

Ilsco

Ilsco TaskMaster TR-CUT25 Bedienungsanleitung

Ilsco

Ilsco TaskMaster TR-CUT45 Bedienungsanleitung

Ilsco

Ilsco TaskMaster TB-CUT65CU-PS Bedienungsanleitung

Ilsco

Ilsco TaskMaster TR-CUT50CU Bedienungsanleitung

Ilsco

Ilsco TaskMaster TB-12U1000-P Bedienungsanleitung

Ilsco

Ilsco TaskMaster TB-CUT45-P Bedienungsanleitung

Ilsco

Ilsco TASKMASTER TB-CUT120CU-PS Bedienungsanleitung

Ilsco

Ilsco TaskMaster TR-CUT-85CU Bedienungsanleitung

Ilsco

Ilsco TaskMaster BLL-CUT120CU-PS Bedienungsanleitung

Ilsco

Ilsco TaskMaster TB-6W 500-I Series Bedienungsanleitung

Ilsco

Ilsco TASKMASTER TOOLS TB-CUT40CU-IS Bedienungsanleitung

Ilsco

Ilsco TaskMaster TR-CUT120CU-S Bedienungsanleitung

Ilsco

Ilsco TaskMaster TB-CUT95CU-PS Bedienungsanleitung

Ilsco

Ilsco TaskMaster TR-CUT95CUS Bedienungsanleitung

Beliebte Cutter Handbücher anderer Marken

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Bedienungsanleitung

Makita

Makita DCS552 Bedienungsanleitung

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Bedienungsanleitung

Makita

Makita 4112HS Bedienungsanleitung

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Bedienungsanleitung

Hitachi

Hitachi CM 4SB2 Fehlerbehebungshandbuch

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Bedienungsanleitung

GCC Technologies

GCC Technologies AFJ-24S Bedienungsanleitung

DeWalt

DeWalt XR LI-ION DCS350N Bedienungsanleitung

Baudat

Baudat ES1 Bedienungsanleitung

Mafell

Mafell ZAF 200 Leitfaden

Makita

Makita 4100NH Bedienungsanleitung

Formax

Formax FD 574 Bedienungsanleitung

EINHELL

EINHELL TE-MA 1500 Bedienungsanleitung

Husqvarna

Husqvarna Cut-n-Break K 760 Bedienungsanleitung

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Bedienungsanleitung

TRI tool

TRI tool 301A Bedienungsanleitung

Roller

Roller King 1 1/4 Bedienungsanleitung