Do not use a voltage other than the allowable power voltage indicated.
AC power supply for the specified charger is AC 100-240V, 50-60Hz.
improper range may cause electric shock, equipment damage, serious injury or
even a death. Abnormally high AC output voltage or frequency from the generator
is a common problem. Measure AC output voltage with a circuit tester before
connecting AC power cord. Regular inspection is needed because improper high
voltage or frequency from the generator may cause serious injury, electric shock,
equipment damage or death.
Do not severely pull, heat or modify the provided AC power cord. The use of
damaged power cord may cause hazardous conditions such as fire or injury.
cable or plug.
To reduce the risk of electric shock, do not touch the AC plug, the AC power code
and the splicer with wet hands.
Do not disassemble AC adapter, battery or the splicer. Any modification to the
splicer may cause a fire, electric shock or injury.
When you use external battery, see the following instructions.
The use of improper external battery may cause smoke, equipment
damage, or in serious cases burning, injury or death.
Do not throw the battery into a fire or a garbage dump.
Do not charge the battery close to flames.
Do not give severe vibration or shock to the battery.
If the battery is not fully charged within 6 hours or green LED lamp
Do not place any object on AC adapter during charging.
Only use the specified battery charger(S-1B) and the specified battery pack(S-1B).
The use of any battery pack other than the specified one may cause smoke or fire,
equipment damage, injury or death.
Warning
Please check the AC power supply before using. AC power supply within the
Connect only to 3-core AC power cord. Do not connect to 2-core power cord,
is not on, immediately stop charging and contact Ilsintech(Inc.)
5
