Iluminarc Ilumicode V 2.21 Bedienungsanleitung

Ilumicode V 2.21

User Manual

Edition Notes

Ilumicode V 2.21 User Manual Rev. 3

Edition Notes

The Ilumicode V 2.21 User Manual Rev. 3 covers the description, safety precautions,

installation, programming, operation, and maintenance of the Ilumicode V 2.21

ILUMINARC® released this edition of the Ilumicode V 2.21 User Manual Rev. 3 in May

2015. Read the guide that shipped with the Ilumicode V 2.21

and this User Manual before

installing, operating, or maintaining this product.

Trademarks

The ILUMINARC® logo, the ILUMINARC® name and all other trademarks in this document

related to services or products by ILUMINARC® are trademarks owne

d or licensed by

ILUMINARC®, its affiliates or subsidiaries. Any other

product names, logos, brands,

company names, trademarks featured or referred to within this document are the property of

their respective trademark holders.

Manual Usage

ILUMINARC® auth

orizes its customers to download and print this manual for professional

information purposes only. ILUMINARC® expressly prohibits the u

sage, copy, storage,

distribution, modification, or printing of this manual or its content for any other purpose

without its written consent.

Document Printing

For better results, print this document in color, on letter size paper (8.5 x 11 in), double-

sided.

If using A4 paper (210 x 297 mm), configure your printer to scale the content of this

document to A4 paper.

Disclaimer

ILUMINARC® believes that the information contained in this manual is accurate in all

respects. However, ILUMINARC® assumes no responsibility for any error or omissions in

this document. ILUMINARC® reserves the right to revise this document and t

o make changes

from time to time in the content without obligation of ILUMINARC® to notify any person or

company of such revision or changes. ILUMINARC® may issue a revision of this manual or a

new edition of it to incorporate such changes. This does not c

onstitute in any way a

commitment by ILUMINARC® to make such changes.

Document Revision

The Ilumicode V 2.21 User Manual Rev. 3 supersedes all previous versions of this manual.

Discard any older versions of this manual you may have and replace with this version.

The entire content ofthis document, except where applicable and unless otherwise noted,

issolely owned byILUMINARC®, a wholly owned trademark ofChauvet &Sons, LLC.

Electronically published byILUMINARC® inthe United States ofAmerica.

Author

Date

Editor

Date

D. Couppe

5/4/15

Table of Contents

Ilumicode V 2.21 User Manual Rev. 3 i

Table of Contents

1. Introduction ..........................................................................................................................1

What Is In The Box .................................................................................................................................. 1

Unpacking Instructions ............................................................................................................................ 1

Claims..............................................................................................................................................................1

Text Conventions..................................................................................................................................... 1

Safety Notes ............................................................................................................................................ 2

Personal Safety................................................................................................................................................2

Mounting and Installation.................................................................................................................................2

Power and Wiring.............................................................................................................................................2

Operation.........................................................................................................................................................2

2. Product Description.............................................................................................................3

Features................................................................................................................................................... 3

Additional Features..........................................................................................................................................3

Overview.................................................................................................................................................. 4

Dimensions.............................................................................................................................................. 5

3. Installation............................................................................................................................6

Mounting.................................................................................................................................................. 6

Power....................................................................................................................................................... 6

DMX Linking ............................................................................................................................................ 6

4. Operation ..............................................................................................................................7

Ilumicode Panel Description.............................................................................................................................7

Product Compatibility............................................................................................................................... 7

Programming........................................................................................................................................... 7

DMX Personality ..............................................................................................................................................7

DMX Starting Address......................................................................................................................................7

Dmx Values......................................................................................................................................................7

Static Colors.....................................................................................................................................................8

Dimmer ............................................................................................................................................................8

Color (Full Color Products)...............................................................................................................................8

Whites Setting (Full Color Products)................................................................................................................8

Reset to Factory Settings.................................................................................................................................8

Menu Map................................................................................................................................................ 9

5. Technical Information ........................................................................................................10

Product Maintenance............................................................................................................................. 10

Product Repairs..................................................................................................................................... 10

Troubleshooting Guide .......................................................................................................................... 11

LED Disclaimer...................................................................................................................................... 12

LED Life.........................................................................................................................................................12

LED Binning...................................................................................................................................................12

Color Rendering Index (CRI)..........................................................................................................................12

Return Procedure .................................................................................................................................. 13

Contact Us..............................................................................................................................13

Technical Specifications........................................................................................................................ 14

Table of Contents

ii Ilumicode V 2.21 User Manual Rev. 3

Notes

Introduction

Ilumicode V 2.21 User Manual Rev. 3 1

1. Introduction

Critical

installation,

configuration, or

operation information.

Failure to comply with this

information may render the

product partially or

completely inoperative,

damage third-party

equipment, or cause harm

to the user

Important

installation or

configuration

information. Failure to

comply with this

information may prevent

the product from

functioning correctly.

Useful

information.

The term “DMX”

used throughout

this document

refers to the USITT

DMX512-A transmission

protocol.

What Is In The Box

•Ilumicode V 2.21

•One signal connector (XLR to clips)

•Two AA batteries

•Warranty Card

•Quick Reference/Start Guide

Unpacking Instructions

Immediately upon receiving a product from ILUMINARC®, carefully unpack the carton.

Check the contents of the box to ensure that all parts are present and that they are in good

condition.

Claims

The carrier is responsible for any damage incurred during shipping. Therefore, if the received

merchandise appears to have been damaged during shipping, the customer must submit the

damage report and any related claims to the carrier, not ILUMINARC®. The customer must

submit the report upon receipt of the damaged merchandise. Failure to do so in a timely

manner may invalidate the customer’s claim with the carrier.

For other issues such as missing components or parts, damage not related to shipping, or

concealed damage, the customer must make claims to ILUMINARC® within 7 days of

receiving the merchandise.

Text Conventions

Convention

Meaning

1~512

A range of values in the text

50/60

A set of mutually exclusive values in the text

“ILUMICON UM”

The name of another publication or manual

<SET>

A button on the product’s control panel

Settings

A product function or a menu option

MENU > Settings

A sequence of menu options

1~10

A range of menu values from which to choose in a menu

Yes/No

A set of two mutually exclusive menu options in a menu

A unique value to enter or select in a menu

Introduction

2 Ilumicode V 2.21 User Manual Rev. 3

There are no

user-serviceable

parts inside this

product. Any reference to

servicing you may find in

this User Manual will only

apply to properly certified

ILUMINARC® technicians.

Do not open the housing

or attempt any repairs

unless you are certified to

do so.

Please refer to all

applicable local

codes and

regulations for the proper

installation of this product.

Keep this manual

for future

consultation. If

you sell this

product to another user,

make sure that they also

receive this manual.

In the unlikely

event that your

Ilumicode V 2.21

may require service,

please contact

ILUMINARC® Technical

Support.

Safety Notes

Please read all the following Safety Notes carefully because they include important

information on how to install, use, and maintain this product safely or any Iluminarc product

connected to it.

Personal Safety

•Avoid direct eye exposure to the light source while the product is on.

•Always disconnect this product from its power source before servicing.

•Always connect this product to a grounded circuit to avoid the risk of electrocution.

Mounting and Installation

•This product is for indoor use only! To prevent risk of fire or shock, do not expose this

product to rain or moisture.

•Make sure there are no flammable materials close to this product while it is operating.

•CAUTION: When transferring product from extreme temperature environments,

(e.g. cold truck to warm humid ballroom) condensation may form on the internal

electronics of the product. To avoid causing a failure, allow product to fully acclimate

to the surrounding environment before connecting it to power.

Power and Wiring

•Always make sure that you are connecting the products associated to the Ilumicode

V 2.21 to the proper voltage, as per the specifications in the product’s manual or on the

product’s sticker.

•Never connect this product to a dimmer pack.

Operation

•The maximum ambient temperature is 113° F (45° C). Do not operate this product at a

higher temperature.

•In case of a serious operating problem, stop using this product immediately!

Product Description

Ilumicode V 2.21 User Manual Rev. 3 3

2. Product Description

The Ilumicode V 2.21 is the configuration module for ILUMINARC® products that do not

have a control panel. This product is the only way of changing their DMX address and

personality from their default values. The Ilumicode V 2.21 can also be used to configure and

control its associated products in the absence of a DMX controller.

The Ilumicode V 2.21 consists of a single hand-held instrument with a pig tale cable

terminated on a 3-pin XLR connector. It comes with a short adapter cable to connect the

Ilumicode V 2.21 to the signal wires using color-coded alligator clips.

Features

•External control panel for ILUMINARC® IP rated products

•Configures products to operate on 1, 2, 3, 4, 5, 6 or 7-channel DMX modes

•Operating modes:

1-channel: SOLID

2-channel: VW

3-channel: VW + D

3-channel: ARC1

4-channel: ARC1 + D

4-channel: ARC2

5-channel: ARC2 + D

5-channel: ARC3

6-channel: ARC3 + D

7-channel: ARC FULL

Additional Features

SPECIAL1: Refer to lighting product’s user manual

SPECIAL2: Refer to lighting product’s user manual

Product Description

4 Ilumicode V 2.21 User Manual Rev. 3

Overview

LCD

Display

Power On

Button

DOWN

ENTER

Product Description

Ilumicode V 2.21 User Manual Rev. 3 5

Dimensions

Installation

6 Ilumicode V 2.21 User Manual Rev. 3

3. Installation

Always connect

ILUMINARC®

products to

protected AC circuits with an

appropriate electrical ground

to avoid the risk of

electrocution or fire

Never connect an

ILUMINARC®

product

to a rheostat

(variable resistor) or dimmer

circuit, even if the rheostat or

dimmer channel serves only

as a 0 to 100% switch.

ILUMINARC®

recommends not

connecting more

than 20 products in

this mode, while keeping the

total distance from the

Ilumicode controller to less

than 60 m (197 ft). Otherwise,

you might need to use an

optically isolated signal

amplifier.

Mounting

The Ilumicode V 2.21

is strictly a handheld unit. Therefore, ILUMINARC® does not provide any

mounting harness or mounting instructions for it. Refer to the corresponding product

manual for

instructions on how to mount the compatible ILUMINARC® products.

Power

The Ilumicode V 2.21 uses two (2) AA batteries (included).

DMX Linking

The diagram below shows how to connect the Ilumicode DMX output to any compatible

ILUMINARC® product.

Note that this connection will control multiple products at the sa

me time, all having the same

DMX address. To assign individual DMX addresses to each product

, you must connect the

Ilumicode unit to each product

, individually. This means that you will also have to disconnect the

DMX output of the product under configuration if there are other products connected to it.

1: Gnd (Black Clip)

2: Data – (Green Clip)

3: Data + (Red Clip)

1: Gnd

2: Data –

3: Data +

Power

Signal

Ilumicode

Addresser

DMX Output

Signal Connector

Other

Products

Inhaltsverzeichnis

Andere Iluminarc Steuereinheit Handbücher

Iluminarc

Iluminarc LOGIC DRIVE 2X Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung