Manual Page 5
About this Manual
Operation Manual
The Operation Manual gives all information about the normal operation and behavior
of the device. It is written for people who only operate the device and do not perform
setup and adjustment procedures. All device elements and software functions are
described in detail, although some of them might never be used. This manual does not
cover any application software. Refer to the appropriate application software manual to
learn about the application software.
Setup and Assembly Manual
The Setup and Assembly Manual is written for technical staff with some basic
mechanical as well as software skills. Many resellers will offer on-site installation;
therefore, large parts or all of the setup and assembly manual might not be of interest
to the reader. The access level at which the setup and adjustment processes are
performed is called “Power user”. This “Power user” level is password protected from
access by the normal operator.
The current version of all manuals can be downloaded from our customer service portal
at portal.imageaccess.de. Be sure to always check for the latest versions of these
manuals.
This manual is divided into the sections A to E.
Section A describes the hardware of the device and gives an overview of all
components and connectors of the scanner. It includes the installation
and set-up of hardware components. Remember that this device is a
precise optical instrument and should be handled accordingly.
Note: As an option the WideTEK 42/WideTEK 48 can be delivered with an
appropriate floor stand. It is recommended to always use the scanner in
combination with the floor stand.
Section B describes the functions of the touchscreen and how to operate the
scanner with the touchscreen.
Section C describes the functions of the integrated Scan2Net interface.
Section D describes test and troubleshooting procedures.
Section E contains all technical data of the scanner and the manufacturer
declarations concerning safety and electromagnetic compatibility (EMC).
