IMC EASYJET E400P Bedienungsanleitung

Ink-jet Printer

E400P

MANUAL

The Manual of Ink-jet Printer

EASYJET INK-JET SYSTEM TECH. CO., LTD.

Table of contents

Declare

Safety Instruction

Packing List

Technical Data

Environment/Electrical Requirement

Install & Test

Switch On/Off

Operation

1. <the main screen> description

2. <the switch of modes> description

2.1 <system>

2.1.1 “password”

2.1.2 “load”

2.1.3 “ink information”

2.1.4 “date time’

2.1.5 “calibrate”

2.1.6 “idle-jet”

2.1.7 “counter continue”

2.2 <Parameter>

2.3 <Print>

2.4 <Browse>

2.5 <Edit>

2.5.1 zone of display printing content

2.5.2 zone of create & save text block

2.5.2.1 create “character/number”

2.5.2.2 create “date/time/serial No./ shift group

2.5.2.3 create “bar code”

2.5.3 tools to edit text block

Eliminate Troubles

Daily Maintenance

The Manual of Ink-jet Printer

Declare

!Please read the manual seriously before running machine. Any mistake or damage caused by user’s

incorrect operation, shall be not on our responsibility.

!In any circumstances, the ink-jet printer shall use the accessories and consumables (include inks &

cleaner) approved by our company. Disassemble machine without our agreement is strictly prohibit.

!The machine we produced which includes appearance, structure, hardware and software, has already

got patent. Any piracy shall bears the legal liability.

!Our company reserves the right of final interpretation. If you have any questions, please feel free to

!Our company reserves the right of update at any moment, and unnecessary to notify the users.

!Copyright reserved by EASYJET. Any unauthorized reproduction, articles picked or other

non-approved usages shall bears the legal liability.

The Manual of Ink-jet Printer

Safety Instructions

Personal Safety

!Some inks & cleaners are harmful, please installing & running machine in well ventilated conditions.

!Some inks& cleaners are flammable, Keep away from all sources of heat and ignition.

Fire-extinguisher shall be equipped nearby the machine.

!Wear safety glasses, gloves and masks when handling inks & cleaners.

!In the condition of inhalation and eye contact, please flush thoroughly with water and seek medical aid

immediately.

!Turn the power off before maintenance.

!Forbid to disassemble machine without our technician’s instruction. The ink-jet printer must be

properly grounded. When connecting electricity, the cabinet is powered with high voltage to risk life.

!Only trained technicians are authorized to carry out installation, maintenance or repair.

Machine Safety

!Loading Requirement

1、Ink-jet printer shall be packaged in standard carton which filled with anti-vibration materials.

2、Purge the inside and outside of print head and plug up the ink inlet. The print head shall be covered by

cap and packed by anti-vibration film to prevent from scratch.

3、Just left an empty cartridge in Ink system before loading.

!The warranty claims will not be accepted in the following situations:.

1、Print head or inks system damages caused by using unauthorized inks and cleaners.

2、Print head or inks system damages caused by replacing different types of consumable randomly. Such

as replaced oil-base inks into solvent-base inks, the two types of ink will cause chemical reaction to

damage machine.

3、Damages caused by running in unsuitable environments or electrical requirements.

4、Damages caused by unauthorized disassembling and assembling.

5、The permanent damages caused by not performing scheduled maintenance, or printhead scratching.

6、Damages caused by disassembling or assembling through unauthorized people .

7、Damages caused by the Force Majeure.

Environmental Protection

Dispose of the waste inks & cleaners shall be in accordance with Local Authority Regulation. The wastes

are not allowed into the sewer system.

The Manual of Ink-jet Printer

Packing List

Name

Quantity

Controller

1 PC

Print head System

1 Set

Photoelectric sensor & Clip

1 Set

Encoder & Accessories

1 Set (choose accessory)

Stands & Fittings Installation

1 Set

AC/DC Adapter & Power code

1 PC

Manual

1 Copy

Ink cartridge & cleaner

1 Set (purchased in separate)

Injector

1 PC (only used in solvent-base ink printer)

The Manual of Ink-jet Printer

Technical Data

!System: 32-bit high-speed processor

!Print head: 128 dots height, hole diameter in 50 um, 185dpi in vertical.

!Print head number: 1

!Print height from 1mm to17.5mm.

!Print Lines capability: Multi-lines (up to character height)

!Line speed capability: Max.33mt/min（200 dpi in lateral）.

!Print Information: Date, Time, Character, Photo, Shift group, Serial number and Bar code.

!Storage: 100 text files and a bitmap in 256*128.

!Operation: Color touch screen with photo menu

Independence Print Parameters

PC Editing

!Display:3.5 inch color touch screen

!Inks: Porous ink, Non-porous ink, UV anti-counterfeit inks, food grade ink, invisible ink etc.

!Inks color: red, yellow, blue, green, black, white etc.

!Through USB interface to import single color bitmap which can be operated by mouse.

The Manual of Ink-jet Printer

Environment/Electrical Requirement

!Electrical requirement：AC 100-240V 50/60Hz

!Max Power：13W (average﹤5W)

!Temperature：5-40

!Humidity：10-90%(non-condensing)

!Electromagnetic interference: running far away from electromagnetic radiation zone

The Manual of Ink-jet Printer

Install & Test

Only trained technicians are authorized to carry out installation.

Before install, confirm the machine was stay in a solid & smooth place without electromagnetic radiation.

Installed as stipulated in manufacturer’s specification, do not change the relative position of ink system and

print head. Any special requirements, please consult the manufacturer and supplier directly.

Ink-jet Printer Installation & Testing

Photo1

1、Unpacking: open the package and move out print head, host machine, suspension pad etc.

2、Suspension Pad Installation: 1) fix pads into triangle stands with same height. 2) adjust the three pads

so as to keep the triangle stand in vertically. 3) fasten the three screw nuts with the spanner.

3、Ink tank installation: 1) Put small steel pipes into large ones and put large steel pipes into triangle

stands, after adjusted the height, fasten the star like screw.2) Put the two-hole aluminum stand in

profile of ink tank system into small steel pipe, and then fasten by star like screw.

4、Host Machine Installation: Put the two-hole aluminum stand in profile of host machine into small steel

pipe, and then fasten by star like screw.

5、Print head Installation: 1) put the aluminum stick into the two-hole aluminum stand, and fastened by

star like screw. 2) Screw the print head on aluminum stick. 3) connect one side of ink tube to filter and

the other side to ink inlet.

The Manual of Ink-jet Printer

Install & Test

6、Photoelectric Sensor Installation: 1. Screw the photoelectric clip on the print head stand. 2. screw the

photoelectric sensor on the clip or other position as request, or use different types of sensor. When

using solvent-base inks, the sensor shall be fixed in front of print head.

7、Encoder Installation: If the production line is not in constant velocity, it must be equipped with

encoder.

8、Power connection: connect AC adapter to suitable AC power. Connect DC to the socket behind of

main machine.

9、Printing Test: 1. Put the ink cartridge into the ink system in correct position. 2. Remove the cap of the

printhead, and squeeze the ink cartridge to drain out the air and cleaner until no bubbles. 3. Clean

up the surface by blotting-paper. 4. Tested by blank papers(with more details see page 26).

10、Product moving position: the speed of production line shall be slower than the speed of printing. A

guide plate can be installed to receive the exactly position of product which has passed the print

head. In principal, the distance between product and print head more closer, the printing result will

be better.

11、Production Line adjustment: more details see page10.

The Manual of Ink-jet Printer

Installation manual of print head and ink system

1. When performing sideward print, the lowest print hole inside the print head should be 10mm higher than

the ink cartridge. This position creates the best ink level difference and is also the design standard on

which we fix the support based. The safety area is within 10mm. When the print head placed downward

exceeds 10mm from standard position, the bottom print hole inside the print head will spill the ink firstly

which will cause the bottom part of the print character can not be printed out or even no ink dots can spill

out. When the print head moves upward exceeds 10mm from standard position, it will leads to

non-continuous ink supply. It requires to press the ink cartridge continuously to guarantee the print quality.

Below is the installation guide for reference

2. When performing downward print, the bottom of the print head system should be 10mm higher than the

top of the ink cartridge. This position creates the best ink level difference and is also the design standard

on which we fix the support based. The safety area is within 10mm. When the print head placed downward

exceeds 10mm from standard position, the bottom print hole inside the print head will spill the ink firstly

which will cause the bottom part of the print character can not be printed out or even no ink dots can spill

out. When the print head moves upward exceeds 10mm from standard position, it will leads to

non-continuous ink supply. It requires to press the ink cartridge continuously to guarantee the print quality.

Below is the installation guide for reference

Inhaltsverzeichnis

Andere IMC Drucker Handbücher

IMC

IMC EASYJET E400HP Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung