28/11/02-\\SERVER\TECNICO\-SNZ\0Sit\hVelox350afe.doc-Scheda Identificazione Codice Padre (mac.sott.etc...)-6
di 76 pagine.
Pagina n°-
6
63 FA
3 - INSTRUCTIONS FOR USE - SUGGESTIONS FOR THE OWNER AND THE OPERATOR
- AUTOMATIC MACHINES -
This machine is designed and manufactured so as to be safely used by the operator, provided that it
is properly operated. No protections will ever suffice if the operator does not work with due caution,
if the machine is not kept in top operating conditions and if the instructions here below are not
respected.
The machine is foreseen to make automatic working cycles after programming/adjusting the
necessary working parameters. As a result of the adjustments you made, the machine works without
further changing till the working process is finished (unless the raw material, you have to work, is at
the end). So that there are moments in which the machine works manually, and moments in which it
works automatically (in this case the presence of the operator is not necessary or consists only of
watching the machine).
You must remember that the machine is designed to cut metals with a sharp tool, and you are
responsible to control that it is operated in a SAFE and CORRECT way. You must :
1. Make sure that the machine is properly installed and right connected to the external sources of energy.
2. Be sure you are familiar with all operating, safety, and application information before operating this
machine.
3. Do not expose yourself or other people to any risk, for example use eye glasses and gloves during the
cleaning and moving of material.
4. Use proper personal protective equipments where required.
5. Keep and do not modify all safety devices installed by the factory, and make sure that these are never
removed or altered or restricted in any way.
6. Make a regular maintenance of the machine and check often its complete working efficiency.
7. Never use tools with different dimensions than the minimum ones indicated.
8. Never cut materials with bigger dimensions than the ones indicated.
9. Keep cutting area free from tools or from other unnecessary objects.
10. Make sure that all guards are rightly placed before starting the machine on.
11. Use always clothes that cannot bring problems: Avoid wearing large sleeves, necklaces, chains, ties, too
big
gloves and any other objects that may get caught in the machine. Gather up long hair.
12. Disconnect always the plug from the supply socket during performing maintenances or adjustment
operations.
13. Never approach or insert hands or body pats into or near cutting area when the band is running.
14. Check if the workpiece is rightly locked when you are using the automatic vice closing, and if the
clamping
pressure is right.
15. Support correctly the material by both cutting sides for evoiding the fall down and / or for driving into the
discharge box.
16. If you cut very short pieces, make sure that they are not dragged by the blade and / or they do not jam
with
the blade.
17. If the blade becomes jammed, turn off power immediately by starting the emergency stop, then bring the
cutting unit to the position CUT START. If it is not possible open the vice, remove the workpiece from the
blade, check if the band or the teeth are broken, and replace it if necessary.
18. Do not change the working conditions during the cutting except for the conditions indicated in this
instruction
book (for example speed changing with ESC)
19. Do not move the machine while cutting.
20. Wear personal means of noise protection (head phones, plugs, an so on ) during the use of the
machine.
ALWAYS OPERATE MACHINE SAFELY, USING COMMON SENSE AND ALERTNESS .
