Impact A4236 Bedienungsanleitung

INSTRUCTIONS

Light Kit Bag #2

A4236

Introduction

Thank you for choosing Impact.

The Impact A4236 is a lightweight, sturdy, and durable case that

is ideal for any application where delicate and bulky lighting

equipment needs to be safely transported or stored.

This roomy bag has the capacity to t three monolight strobes and

reectors, as well as quartz or LED lights. The inner lid secures the

lights and provides enough space to hold up to four light stands

along with umbrellas, softboxes, or any gear you need to transport to

your shoot. Three large zippered mesh accessory pockets are ideal

for storing cables and organizing other gear or personal items.

A padded water-resistant nylon outer shell offers protection

from the elements and against bumps or impacts to your gear.

The interior of the bag is lined with a soft cotton tricot fabric

that will not scratch your equipment. It also rmly holds the

touch-fastener strips of the dividers and inner lid, assuring

that your equipment will not move during transport.

Dual handles are easily lengthened to convert into dual shoulder

straps. And the bottom of the bag features three rubber feet for added

protection when placing the bag on the ground. The bag folds down

to a quarter of its height for convenient storage and easy setup.

Precautions ⚠

• Please read and follow these instructions,

and keep this manual in a safe place.

• Clean the unit with a soft, dry cloth.

• Make sure the item is intact and that there are no missing parts.

• Excercise caution when using this product

with the maximum load capacity.

• All photos are for illustrative purposes only.

Overview

1Light Kit Bag

2Adjustable dual

handles/shoulder strap

3Large internal

dividers (4)

4Small internal

dividers (2)

5Bottom panel

6Inner lid

1. Open the bag and remove

all the contents.

2. Insert the bottom panel

so it lays at on the

bottom of the bag. 1

3. Insert the internal dividers

according to your needs. Press

the touch fastener strips on

the sides of the dividers to the

cotton interior lining of the bag

to hold them in position. 2

Note: It’s recommended

to space the large internal

dividers far enough apart so

they can support the inner lid.

Assembly Instructions

4. Place the inner lid over the

dividers and press the touch-

fastener strips to the sides of

the cotton interior lining. 3

5. Zip up the bag and adjust

the length of the handles as

needed. When fully extended,

the handles become a shoulder

strap. 4Use the handle

wrap as a shoulder pad.

Specications

Outer shell material Water-resistant nylon

Interior lining material Cotton tricot

Type of closure Dual zippers

Folded dimensions (H × W × D) 3.5″× 34.5″× 13″(9 × 87.6 × 33 cm)

Exterior dimensions (H × W × D) 14″× 34.5″× 13″(35.6 × 87.6 × 33 cm)

Interior dimensions (H × W × D) 13.5″× 34″× 12″(34.3 × 86.4 × 30.5 cm)

Carrying/transport options Dual 2″wide strap handles with wrap that

convert to shoulder straps

Weight 5.75 lb. (2.6 kg)

One-Year Limited Warranty

This Impact product is warranted to the original purchaser to be free from defects

in materials and workmanship under normal consumer use for a period of one (1)

year from the original purchase date or thirty (30) days after replacement, whichever

occurs later. The warranty provider’s responsibility with respect to this limited

warranty shall be limited solely to repair or replacement, at the provider’s discretion,

of any product that fails during normal use of this product in its intended manner and

in its intended environment. Inoperability of the product or part(s) shall be determined

by the warranty provider. If the product has been discontinued, the warranty provider

reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident,

alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED

HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES

NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED

WARRANY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This

warranty provides you with speciﬁc legal rights, and you may also have additional

rights that vary from state to state.

To obtain warranty coverage, contact the Impact Customer Service Department to

obtain a return merchandise authorization (“RMA”) number, and return the defective

product to Impact along with the RMA number and proof of purchase. Shipment of the

defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.impactstudiolighting.com or call

Customer Service at 212-594-2353.

Product warranty is provided by the Gradus Group.

www.gradusgroup.com

GG1

Inhaltsverzeichnis

Andere impact Elektrowerkzeuge Handbücher

impact

impact CC-130 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch

impact A4236 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken