In-situ RDOX Bedienungsanleitung

2023-11-08 | 2000213

RDOX

Operator’s Manual

Information subject to change without notice. In-Situ, In-Situ logo, “Water Simplied”, VuLink, RDO,

RuggedCable, TROLL, BaroTROLL, HydroVu, VuSitu, Baro Merge, and Win-Situ are trademarks or registered

www.in-situ.com/patents

Your equipment was carefully inspected before shipping. Check the equipment for any physical damage

sustained during shipment. Notify In-Situ and le a claim with the carrier if there is any such damage; do not

attempt to deploy or operate the equipment.

Unpacking and Inspecting

Save packing materials for future storage and shipping of your equipment.

If you have questions or experience problems with your equipment, contact our skilled technical support

team in your area by chat, email, or phone by going to www.in-situ.com/support.

Be sure to have the following information available:

• Product model

• Serial number

• Description of the problem, including how the product was used and the conditions noted at the time of

the malfunction

Technical Support

Document Conventions

Disposal

Throughout this document, you will see the following symbols:

A checkmark highlights a tip or feature.

The exclamation point calls your attention to a requirement, safety issue, or important action

that should not be overlooked.

Recycle the instrument according to local regulations. Dispose of calibration solutions as described in the

Safety Data Sheet accompanied with the calibration solution.

In the UK and EU, In-Situ can provide recycling of your old equipment and can sometimes recycle other

manufacturers’equipment when replaced with In-Situ equipment. Trade-in options may be available for

new equipment. Contact In-Situ for more information.

www.in-situ.com

Contents

Technical Support........................................................................................................................................... 2

Unpacking and Inspecting ......................................................................................................................................................... 2

Document Conventions ................................................................................................................................. 2

Disposal........................................................................................................................................................... 2

Introduction.................................................................................................................................................... 5

Serial Numbers ............................................................................................................................................................................... 5

About the RDOX Optical Dissolved Oxygen Probe............................................................................................................ 5

Instrument Details ......................................................................................................................................... 6

Instrument Specications.............................................................................................................................. 7

RDOX................................................................................................................................................................................................... 7

RDOX Stainless Steel..................................................................................................................................................................... 7

Unpack the Probe ......................................................................................................................................................................... 7

Technical Specications................................................................................................................................. 8

Getting Started............................................................................................................................................... 9

Box Contents.................................................................................................................................................................................... 9

Tools, Supplies, & Accessories (Not Included)...................................................................................................................... 9

Safety ............................................................................................................................................................ 11

Intended Use .................................................................................................................................................................................11

Learn More .....................................................................................................................................................................................11

7300 Monitor Options.................................................................................................................................. 12

Sensor Connections to 7300 Monitor...................................................................................................................................12

Set Salinity ......................................................................................................................................................................................12

Set Pressure....................................................................................................................................................................................12

Add Measurement.......................................................................................................................................................................12

Calibration .................................................................................................................................................... 13

Calibrating the Sensor................................................................................................................................................................13

100% Saturation Calibration....................................................................................................................................................13

0% Saturation Calibration.........................................................................................................................................................13

Storage and Maintenance............................................................................................................................ 14

Storing the Sensor .......................................................................................................................................................................14

Maintenance .................................................................................................................................................................................14

How to Clean the Instrument ..................................................................................................................................................14

How to Replace the RDO Cap..................................................................................................................................................14

Mechanical Installation .......................................................................................................................... 15

Mounting Options .......................................................................................................................................................................15

www.in-situ.com

Mounting Shaft.............................................................................................................................................................................16

Handrail and Wall Brackets.......................................................................................................................................................16

Customer Supplied Brackets....................................................................................................................................................16

Declarations of Similarity ............................................................................................................................ 17

www.in-situ.com

Introduction

About the RDOX Optical Dissolved Oxygen Probe

The RDOX Optical Dissolved Oxygen Probe is a rugged, reliable instrument designed to deliver accurate

dissolved oxygen (DO) data across a wide measurement range and to reduce maintenance costs. The probe

features the latest optical technology for DO measurement.

This kind of optical technology requires very few consumables:

• No membrane replacement

• No electrolyte

The RDO cap contains the optically sensitive material. Replace the RDO cap according to your site’s needs or

approximately once every 2 years.

The sensor operates with optical luminescence measurement technology described in Standard Method

4500-O and In-Situ Methods 1002-8-2009, 1003-8-2009, 1004-8-2009 (EPA approved).

When the probe initiates a reading, an LED emits blue light, which excites lumiphore molecules in the

sensing element. Excited lumiphore molecules emit red light, which is detected by a photodiode. Oxygen

molecules quench the excited lumiphore molecules and prevent the emission of red light—a process called

dynamic luminescence quenching. Determination of DO concentration by luminescence quenching has a

linear response over a range of concentrations.

Lumiphore molecules are excited by blue light and then emit red light, which is

detected by a photodiode. Optical electronics report DO concentration in mg/L.

Serial Numbers

The probe serial number is engraved on the side of the unit. The RDO cap serial number is programmed on

the memory chip inside the cap.

www.in-situ.com

6www.in-situ.com

The RDOX is designed to deliver accurate dissolved oxygen (DO) data across a wide measurement range and

to reduce maintenance costs. The probe features the latest optical technology for DO measurement.

1 Cable end with ying leads

2Titanium casing with built-in

thermistor

Cable end with Twist-Lock

connector for Rugged Cable

system

4 RDO cap (installed on RDO sensor)

5 Dust cap

6 Nose cone

Instrument Details

7 Storage canister

8 RDO cap (replacement)

7www.in-situ.com

Instrument

length 7.0 in (177.95 mm)

Nose cone 2.27 in (57.56 mm)

Instrument

diameter 1.85 in (46.99 mm)

Instrument Specications

Unpack the Probe

1. Remove the probe and other packaging materials from the box.

2. Unscrew the nose cone from the probe and remove the red protective dust cap from the sensor. Save

the dust cap for later use.

3. Remove the RDO cap from the storage sleeve within the storage canister.

RDOX

Instrument

length 7.56 in (192.03 mm)

Nose cone 1.19 in (30.23 mm)

Instrument

diameter 1.85 in (46.99 mm)

RDOX Stainless Steel

Technical Specications

Environmental Class IP68 (with sensor cap installed)

Materials

Viton, Acrylonitrile Butadiene Styrene (ABS), Polycarbonate/

Polymethylmethacrylate (PC/PMMA) blend, Acrylonitrile Butadiene Rubber

(NBR), FKM Fluoroelastomer, Polychloroprene, Thermoplastic Polyurethane

(TPU), Titanium, Stainless Steel, CPVC

Weight 1.03 kg (2.27 lbs)

Operating Temperature 0° to 50° C (32° to 122° F)

Storage Temperature Probe: -5° to 60° C (23° to 140° F)

Cap: 1° to 60° C (33° to 140° F)

Mounting Location Indoor/Outdoor

Cable Type Rugged Cable system with Twist-Lock connector

Pressure Rating (Depth) 210 m (289 ft)

Supply 12 VDC from Monitor

Sensor Communication Modbus/RS 485

Range 0-60 mg/L

Accuracy ±0.1% mg/L on range 0-20 mg/L

±0.2% mg/L on range 20.01 - 60 mg/L

Resolution 0.01 mg/L

Response Time 90% of value in less than 45 seconds @ 25° C (77° F)

95% of value in less than 60 seconds @ 25° C (77° F)

Measurement Principle Optical measurement of luminescence

Light Source Blue LED

Temperature Measurement Thermistor

Flow Rate No ow necessary

Compliance EMC 2014/30/EU IEC 61000-6-2:2005

EN 55011:2009

www.in-situ.com

Getting Started

Box Contents

Tools, Supplies, & Accessories (Not Included)

• RDOX instrument (stainless steel or plastic)

• RDO cap

Install RDO cap.

• Flathead & Phillips head screwdrivers

• Wire cutters

• 7300 monitor or other monitor

Wire RDOX instrument to monitor.2

Connect RDOX to Twist-

Lock cable. Twist cable

until it clicks into place.

Insert ying leads cable

through cable gland cap.

Identify brown and white

cables. Cut these unused

wires close to their base.

Ensure monitor is

isolated. Remove cover.

Unscrew cable gland cap.

Isolate the monitor from power before moving forward. There is a risk of electrical shock if you

do not isolate the monitor before installing wires.

2023-11-08 | 2000212

RDOX Quickstart Guide

Remove red dust cap.

Unscrew and remove

nose cone from the

instrument.

Remove the RDO cap

from the storage canister.

Align RDO cap’s at edge

with instrument’s at

edge. Slide on cap.

Replace the nose cone.

Align

with cap

Connect the blue cable where the terminal is labeled“white” when wiring cable into plug.

Screw on monitor cover.

Connect power to

monitor.

Insert red, black, blue,

green wires into plug.

Screw in. Insert terminal

plug into terminal block.

Tighten cap securely

onto cable gland

locknut.

Thread wires through

cable gland opening.

Remove terminal plug

from terminal block.

Connect power to

monitor. Press Menu.

Use arrow keys to select

Add Sensor. Press OK.

Use arrow keys to select

Sensor Cong. Press

OK.

When RDOX appears,

select it. Press Menu

twice to access data.

3Add RDOX readings to 7300 monitor.

Calibrate RDOX instrument.4

Repeat above to install more sensors. An expansion box is required for more than 2 sensors.

Clean sensor with a soft

cloth.

Press Menu.Moisten a sponge and

place it in a dark cup.

Put instrument in cup.

Allow it to humidify for

up to 5 minutes.

www.in-situ.com

Andere Handbücher für RDOX

Inhaltsverzeichnis

Andere In-situ Sicherheitssensor Handbücher

In-situ

In-situ SludgeWatch 715 Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung