MODEL/IDWD60DS INALTO.HOUSE
QUICK START GUIDE
INSTALLATION
• Preparing the cavity: The cavity for the
dishwasher will need to adhere with the
dimensions in the diagram of page 14 of the
user manual. Please note that the water
supply and power point for the appliance
cannot be in the dishwasher cavity.
• Fit the mounting brackets: Dishwasher
Drawers are unstable until they are secured
to their surrounding cabinetry.
• The dishwasher must be level for proper
dish rack operation and wash performance.
If needed, adjust the feet on each corner to
ensure the appliance sits evenly on the floor.
• For a complete guide, refer to the Installation
Instructions in the user manual, pages 14–21.
CLEANING THE FILTER SYSTEM
The filter system at the base of the dishwasher
cabinet traps coarse debris from the washing
cycle. The debris over time may cause the
filters to clog. We recommend that you clean
this regularly under running water to ensure
optimal performance of your dishwasher
wash cycles.
For a more detailed guide and other care tips,
refer to the Maintenance & Cleaning section of
your user manual, pages 25–26.
SUPPORT
Telephone: 1300 11 4357
Email: support@residentiagroup.com.au
DETAILS
Dimensions (W, D, H mm): 595 × 570 × 820
Warranty: 3 Years (2 + 1 on registration)
Congratulations on your new
InAlto 60cm Double Dishwasher Drawer!
THE CONTROLS
1Power
2Drawer Selector
3Program Selector
4Function Selector
5Delay Start
Press this button to add a delay start time
in one-hour increments up to 24 hours.
6Child Lock
Pressing this button combination will lock
the control panel. Only the Power button
will remain active.
7Start/Pause
8Washing Program Display
9Display Screen
Displays the operating drawer, time
remaining, delay time,error code and child
lock indication.
10 Extra Functions Display
11 Warning Displays
Control Panel
Operation (Button)
Power
1
2
Program
selector
3
Press this button to turn on your dishwasher, the screen will
light up.
Press this button to select the appropriate washing program, the
selected program indicator will light up.
Press the button to select a option, corresponding indicator
will be lit.
Press and hold the Option button for 3 seconds in standby
mode to run the Dry & Fresh option immediately.
4Option
selector
1 2 3 4 6 5 7
8 9 10 11
Press the button to increase the delay start time. Delay a
cycle for up to 24 hours in one-hour increments. After setting
the delay time, press the Start/Pause button to start.
5Delay time
This option allows you to lock the buttons on the control panel,
so children cannot accidently start the dishwasher by pressing
the buttons on the panel. Only the Power button and Drawer
selector button remains active.
To lock or unlock the buttons on the control panel, press and
hold the Option button+ Delay button for 3 seconds
simultaneously.
6Child lock
Press the button to select either upper drawer or lower drawer
loaded, the corresponding indicator will light up.
Drawer
selector
10
7
8 9 10 11
