Indesit MOON 2006 Bedienungsanleitung
All the parts included in this document are the property of Indesit Company S.p.A.
All rights reserved.This document and all the information contained in it are supplied without responsibility
for possible errors or omissions and no part of it can be reproduced, used or removed without written
permission or a contractual clause.
SERVICE MANUAL
Washing machine 2006
MOON
SERVICE MANUAL
Washing machine 2006
MOON
Service Manual
MOON - 2006
Linguage
English
Edition
2006.06.12
GB
2
Linguage
English
GB
Service Manual
MOON - 2006
Edition
2006.06.12
CONTENTS OF THE MANUAL: NOTE FOR THE ENGINEER.
This manual is a supporting document for technical personnel.It contains a description of the various product
types, the general operating principles and indications concerning assistance.
Technical personnel should, in any case, consult the specific model on . (servicenet.
indesitcompany.com) to access data and updates of wiring diagrams, technical bulletins and spare parts.
3
Linguage
English
GB
Service Manual
MOON - 2006
Edition
2006.06.12
CONTENTS
1. PRODUCT TYPE 4-6
Key 4
Interfaces 5
Technical data 5
Energy Label 6
2. OPERATING LOGIC 7-13
Innovative product characteristics 7-9
Instructions for settings and operation 10-11
Programmes 12-13
3. COMPONENTS 14
4. WIRING DIAGRAMS 15
5. ASSISTANCE 16-25
Demo Mode 16
Autotest (Testing / Running-in) 16
Autotest Sequence 16
Faults and Solutions 17-19
Doctor 20
Troubleshooting 20
Dismantling/Assembly 21-26
6. EXPLODED VIEWS 27-30
TYPE
GB
4
Service Manual
MOON - 2006
Linguage
English
Edition
2006.06.12
1. PRODUCT TYPE:
1.1. KEY:
S I X L 12 5 S
1st letter 2nd letter 3rd letter 4th letter 1st&2nd Number 3rd Number 5th letter
Product line Brand Type Type Max Spin Speed Specs Colour
S = Smart I = Indesit X = maxi 6 kg. L = led 8 = 800 0 S = silver unit
S = Slim D = display 10 = 1000 1 blank = white unit
. .
. .
. .
14 = 1400 7
TYPE
GB
5
Service Manual
MOON - 2006
Linguage
English
Edition
2006.06.12
1.2. INTERFACE:
8
9
1. On/OFF/RESET BUTTON
2. DOOR LOCK LED
3. Cotton Whites/PAUSE BUTTON
4. Mixed Coloureds Easy Iron/PAUSE BUTTON
5. Delicates/PAUSE BUTTON
1.3.TECHNICAL DATA:
MODEL: MOON
Capacity: da 1 a 6,0 Kg
Dimensions:
Width: 59,5 cm
Height: 85 cm
Depth: 56,5 cm
Water connections:
Maximum pressure: 10 bar
Minimum pressure: 0,5 bar
Tank Capacity 52 litres
Electrical connection:
Voltage: 220/240 volt. 50 Hz
Maximum power consumption: 1850 Watt.
Maximum spin speed: 1200 giri.
6. Rapid 30’/Rinse Only/PAUSE BUTTON
7. Programme PROGRESS RING
8. Door
9. Filter Cover
4
1
5
6
2
3
7
TYPE
GB
6
Service Manual
MOON - 2006
Linguage
English
Edition
2006.06.12
1.3. ENERGY LABEL:
Energy
Manufacturer
Model
Washing
machine
More efficient
Less efficient
Energy consumption
kWh/cycle
(based on standard test results
for 60°C cotton cycle)
Actual energy consumption will
depend on how the appliance is used
Washing performance
A: higher G: lower
Spin drying performance
A: higher G: lower
Spin speed (rpm)
Capacity (cotton) kg
Water consumption
Noise Washing
(dB (A) re 1 pW) Spinning
Further information is contained in product
brochures
Norm EN 60456
Washing machine label Directive 95/12/EC
MOON
1200
6. 0
52
B C D E F G
A
1.02
A
INDESIT
B C D E F G
A
+
Brand
Model
Power Class
Power Consumption in standard cycle
(kW/h)
Washing Class
Spin Class
RPM
Maximum load (kg).
Maximum water consumption in
standard cycle
OPERATION
7
GB
Service Manual
MOON - 2006
Linguage
English
Edition
2006.06.12
2. OPERATING LOGIC:
2.1. PRODUCT CHARACTERISTICS ANDTECHNOLOGICAL INNOVATIONS:
PROGRAMME SELECTOR:
The new circular programme selector features 5
backlit buttons, a central disc bearing the LOGO
and a ring with 12 blue leds between the buttons
and the disc. The leds around the ring light up to
indicate programme progress and, in the event of a
malfunction, the specific fault.
The MOON washing machine features many technological innovations, which are listed below:
WATER SYSTEM:
This machine features a water system designed
around two solenoid valves and a water dispenser,
connected by two hoses, which manage water
and detergent loading. With all programmes, the
appliance starts loading water with the first solenoid
valve, but activates the Oko system only with the
“Cotton 60°” programme. During the wash phase,
water is loaded as follows:
1. The washing machine loads water with the first
solenoid valve. (Flow 1)
2. Water is drained for two seconds (only for the
standard programme – Cotton 60°)
3. The machine finishes loading water with the second
solenoid valve, drawing the detergent into the drum.
(Flow 2)
During the rinse phase, the machine draws in fabric
softener with both solenoid valves.The flow of water
creates a cross-stream inside the dispenser (Flow 1
+ 2), generating a thrust that allows the water to exit
through all the holes, drawing fabric softener into the
drum and cleaning all the other detergent dispenser
compartments.
1. Programme selector
2. Water system
3. Detergent dispenser
4. Door seal / Door
5. Vent tube
6. Drain pump
7. Conductivity sensor
Detailed explanation of these components is
provided below.
1
2
1
221+2
OPERATION
8
GB
Service Manual
MOON - 2006
Linguage
English
Edition
2006.06.12
DETERGENT DISPENSER:
The detergent dispenser is located inside the
appliance, on the inside of the door.
It can be removed for cleaning by lifting it upwards
and carefully releasing the top cover.
The dispenser consists of three compartments: the
first (left to right) is for liquid detergents.
The second (middle compartment) is for powder
detergents, while the last (right-hand) is for fabric
softener.
VENT TUBE:
The vent tube is connected to the part of the tub
where the water inlet feed is normally connected.
The vent tube steam outlet is located next to the inlet
hose at the point where, in machines with hot water
solenoid valves, the solenoid valve hose connection
is usually situated.
DOOR SEAL / DOOR:
The water dispenser is located at the top of the door
seal, fixed with a metal plate.
The door does not allow you to see inside the drum;
the detergent dispenser is inside, and a small drip
tray provided with sponge has been fitted under it.
OPERATION
9
GB
Service Manual
MOON - 2006
Linguage
English
Edition
2006.06.12
DRAIN PUMP:
The drain pump is equipped with a new self-cleaning
bayonet filter which prevents large objects such as
coins, buttons, etc. from ending up inside the pump,
thus avoiding blockages and noisy operation.
It is located at the bottom right-hand side of the
machine. To access the filter, simply turn the filter
cover anti-clockwise until the bayonet coupling
releases, allowing access to the filter.
CONDUCTIVITY SENSOR:
The Moon washing machine is equipped with a new
Conductivity Sensor located on the plastic tub next
to the Oko hose, as shown in the photograph.
The Conductivity Sensor manages the “30 min” or
“Daily” programme. Its functions are:
1. If the wash load consists of clothes to be washed
without detergent, the machine will load water
and then test the level of alkalinity in the wash
water; if no alkalinity is present, the machine will
activate the standard “30 min” wash cycle;
2. If, on the contrary, the sensor detects that the
machine has been loaded with laundry plus
detergent, it will activate two 15 minute rinse
cycles.
NB: The conductivity sensor is provided with
a gasket to guarantee seal and prevent water
leaks.
A plastic cover has been fitted on the filter to prevent
hands from coming into contact with the electrical
part of the pump, which must not be eliminated.
OPERATION
10
GB
Service Manual
MOON - 2006
Linguage
English
Edition
2006.06.12
2.2. APPLIANCE OPERATION:
SWITCHING THE APPLIANCE ON/OFF:
The machine is switched on by pressing the On
button. The symbol on the button lights up, after
which the programme buttons start flashing and
the leds on the ring light up one after another. At
this point the machine is on Stand By and is ready
for use.
SELECTING/STARTING A
PROGRAMME:
Programmes are started by pressing the relative
programme button, upon which the washing machine
starts immediately.
The Power On button and the selected programme
button leds will remain lit, while the other programme
leds and all those around the ring will switch off.The
leds around the ring will light up one after another to
indicate programme progress.
PAUSE/RIAVVIO DEL PROGRAMMA IN CORSO:
PAUSE/RESTART PROGRAMME:
The Pause/Restart function is used for interrupting
a wash cycle, which can then be restarted from the
exact point in the cycle where it was interrupted.
When the button of the programme in progress is
pressed, the washing machine stops, the Power On
button remains lit, the leds around the ring light up and
start flashing, as does the selected programme led.
To restart the wash programme, simply press the
programme button once more.
Inhaltsverzeichnis
Andere Indesit Waschmaschine Handbücher
Indesit
Indesit IWC 6165 Bedienungsanleitung
Indesit
Indesit XWE 81252 Bedienungsanleitung
Indesit
Indesit WIL 113 Bedienungsanleitung
Indesit
Indesit IWD 6105 Bedienungsanleitung
Indesit
Indesit BWE 71283 Bedienungsanleitung
Indesit
Indesit IWE 61051 Bedienungsanleitung
Indesit
Indesit WG1030G Bedienungsanleitung
Indesit
Indesit IWC 5145 Bedienungsanleitung
Indesit
Indesit WIXL 133 Bedienungsanleitung
Indesit
Indesit EWC 81483 Bedienungsanleitung
Indesit
Indesit WIXL 126 Bedienungsanleitung
Indesit
Indesit WMG 622 Bedienungsanleitung
Indesit
Indesit IWND 61252 Bedienungsanleitung
Indesit
Indesit WA 155 Bedienungsanleitung
Indesit
Indesit WIXE 127 Bedienungsanleitung
Indesit
Indesit WISE 127 X Bedienungsanleitung
Indesit
Indesit IWE 81481 S Bedienungsanleitung
Indesit
Indesit XWE 71283 Bedienungsanleitung
Indesit
Indesit IWC 6165 Bedienungsanleitung
Indesit
Indesit IWE 61251 Bedienungsanleitung
