Indmar Standard 360 Bedienungsanleitung

6.2L

CALIFORNIA-SPECIFIC INFORMATION

Boats manufactured for use in California for model year 2018 and after

meet the California EVAP Emissions regulation for spark-ignition marine

watercraft. Boats meeting this requirement will have the following label

affixed near thehelm.

The fuel system in boats marketed in states other than California complies

with U.S. EPA-mandated evaporative emission standards at time of

manufacture using certified components.

CALIFORNIA AIR RESOURCES BOARD (CARB)

Outboard, sterndrive and inboard powered boats sold in the state of

California are equipped with special components and certified to meet

stricter environmental standards and exhaust emissions. All boats sold in

California since 2009 are required to meet Super-Ultra-Low (four-star)

emissions.

EXHAUST EMISSIONS

Sterndrive and inboard marine engine powered boats

meeting CARB’s exhaust emission standards are

required to display the four-star label on the outside

of the hull above the waterline. Outboard and

personal watercraft marine engines may also comply

with these standards.

Operating, servicing and maintaining a recreational

marine vessel can expose you to chemicals including

engine exhaust, carbon monoxide, phthalates and lead,

which are known to the State of California to cause

cancer and birth defects or other reproductive harm. To

minimize exposure, avoid breathing exhaust, service your

vessel in a well-ventilated area and wear gloves or wash

your hands frequently when servicing this vessel. For

more information go to: www.P65warnings.ca.gov/marine

Carbon monoxide (CO) can cause brain damage or death. Engine and

generator exhaust contains odorless and colorless carbon monoxide

gas. Carbon monoxide will be around the back of the boat when

engines or generators are running. Signs of carbon monoxide

poisoning include nausea, headache, dizziness, drowsiness and lack

of consciousness. Get fresh air if anyone shows signs of carbon

monoxide poisoning. See engine manufacturer’s manual for

information regarding carbon monoxide poisoning.

WELCOME

Dear Indmar Marine Engine Owner:

Thank you for selecting a boat powered by an Indmar Marine

engine.Indmar is proud to provide the power to the best boat

companies in the business and we hope that pride shows in the

quality of our products.In the unlikely event that you have a defect-

related problem with your boat’s engine or drive train, you can

rest assured knowing it is backed by our industry-leading ﬁve-year

warranty coverage on premium models.

This is another exciting year for Indmar and for the marine

industry. Indmar has joined forces with Ford Motor Company to

produce a line of marine engines designed to exceed customer

expectations.The 6.2L Ford-based engines are fuel injected and

equipped with catalytic converter exhaust systems to provide a

cleaner and safer boating experience for you and your family.

If you have any questions concerning your engine that are not

covered in this manual, please feel welcome to contact Indmar

Customer Service at (901) 353-9930 or visit our website, www.

indmar.com, and submit your question.

Thanks again for choosing an Indmar-powered boat.We wish you

safe, trouble-free boating.

Sincerely,

Team Indmar

INDMARMARINEENGINESVALUESTATEMENT

Indmar Marine Engines has a pedigree going

back over 40 years in the inboard marine

industry and a proud tradition of pointing the way

forward. Today, this legendary brand delivers

an inimitable mix of unrivaled performance,

meticulous craftsmanship and groundbreaking

innovations – charting a course for others to

follow, yet leaving the competition behind.

INDMARMARINEENGINESCOMPANY

MISSION

To produce the world’s ﬁnest, most advanced

and most dependable gasoline inboard

marine engines at the best possible price,

while respecting the needs of our employees,

customers, vendors and the precious

environment we share.

iii

CONTENTS

Introduction.....................................................................................v

Section 1 – Safety ...................................................................... 1-1

Carbon Monoxide Gas ...........................................................1-2

Engine Oil............................................................................... 1-5

Cleaning Solvents .................................................................. 1-6

Entanglement......................................................................... 1-6

Environmental ........................................................................1-6

Section 2 – General Information................................................. 2-1

Using Oxygenated Fuels or Fuels with Alcohol...................... 2-3

Biobutanol-Blended Gasoline.................................................2-4

Fuels in Other Countries ........................................................2-4

Indmar Fuel Recommendations............................................. 2-5

Fuel System ........................................................................... 2-5

Battery.................................................................................... 2-6

“Service Required” or “Check Engine” Indicator..................... 2-9

Engine Cooling.....................................................................2-10

Aquatic Invasive Species (AIS) Prevention .......................... 2-11

Exhaust Hoses..................................................................... 2-14

Selecting a Propeller............................................................ 2-15

Section 3 – Pre-Start Checks ..................................................... 3-1

Pre-Start Checks.................................................................... 3-1

Section 4 – First-Time Operation and Break-In .......................... 4-1

First-Time Operation ..............................................................4-1

Break-In.................................................................................. 4-3

Section 5 – Engine Starting Procedures .................................... 5-1

How to Start Your Engine .......................................................5-1

If Engine Does Not Start ........................................................ 5-3

How to Clear the Engine ........................................................5-4

Engine Restart ....................................................................... 5-5

Section 6 – Normal Operation .................................................... 6-1

Sensible Operation................................................................. 6-1

Daily Routine.......................................................................... 6-1

Operating the Controls........................................................... 6-3

Unusual Vibration ...................................................................6-4

Section 7 – Maintenance............................................................ 7-1

General Service Notes........................................................... 7-1

Engine Flame Arrestor .........................................................7-10

Engine Cooling.....................................................................7-11

Internal (Cooling System) Care............................................ 7-16

Fresh Water Cooling............................................................. 7-17

Fuel System ......................................................................... 7-19

Transmissions ......................................................................7-21

Electrical System ................................................................. 7-27

Wiring ................................................................................... 7-28

Accessory Drive ...................................................................7-30

Section 8 – Storage and Winter Lay-Up ..................................... 8-1

General Preparation...............................................................8-2

Reactivating Engine After Extended Storage.......................8-13

Extended Storage ................................................................8-15

Section 9 – Troubleshooting ....................................................... 9-1

Appendix A – Maintenance Components and Fluids..................A-1

Service Log ............................................................................A-3

Appendix B – Engine Speciﬁcations...........................................B-1

Appendix C – Indmar Limited Product Warranty ........................C-1

INTRODUCTION

This manual will acquaint you with basic information needed to

safely operate and maintain your Indmar engine. We suggest you

and all other operators read the entire manual before using your

boat.

We recommend you contact your Indmar dealer for all engine

service. Certiﬁed Indmar Technicians are trained to service your

Indmar engine and drive train. They have current speciﬁcations,

parts and the special equipment needed to service your Indmar

engine and drive train. To ﬁnd your nearest Indmar dealer, please

visit our website at www.indmar.com or call (901) 353-9930.

To ensure that the proper information is available, note the six digit

engine serial number. The serial number is stamped on the engine

block. Refer to Figure 1.1 for locations. The serial number also

appears on the emissions label on the valve cover of the engine

and on several stick-on tags that are attached to major engine

components.

INDM-0012

1 - Engine Block

2 - Valve Cover

3 - Oil Pan

Figure 1.1 – Serial Number Locations

WARRANTYREGISTRATION

The Federal Boat Safety Act of 1971 requires registrations of

marine products sold in the United States be maintained by the

manufacturer and dealers of those products.Your dealer should

have completed your warranty registration to comply with federal

regulations. This registration enables us to contact you, if it should

become necessary, to change or improve your product. The engine

serial number is stamped into the block. For additional serial number

locations, refer to Figure 1.1. Always retain a copy of the serial

number for your personal records.

Warranty registration must be received within 10 days after date

of purchase by the ﬁrst owner. If your engine is not registered, all

warranties will be void.

vii

WARRANTYREGISTRATIONTRANSFER

The remainder of the engine warranty is transferable to a second

or subsequent owner. Warranty transfers must be completed within

10 days of the transfer of ownership.

If the trade-in and resale is handled by an authorized Indmar

dealer, the dealer must ﬁll out the warranty registration transfer

form and send it and other paperwork speciﬁed along with the

warranty transfer fee and the transfer will be processed on

approval by Indmar.

If the sale of the boat is from a private owner to another individual,

the engine package must be inspected, at the seller or purchaser’s

expense, and the Inspection Form, Warranty Transfer Form,

speciﬁed paperwork and transfer fee and the transfer will be

processed on approval by Indmar.

The new boat owner will be notiﬁed within 10 days of Indmar’s

receipt of the transfer form whether the transfer has been

accepted or not. If the transfer has been accepted, the warranty

expiration date will also be provided for the new owner.

To obtain enjoyment from your boat, follow recommendations

described in this manual. The knowledge you gain through careful

review will help you experience lasting satisfaction.

Further information regarding the care, operation, required

equipment or speciﬁcations for your boat can be obtained from

your local US Coast Guard Auxiliary, US Power Squadron, state

boating authorities, or the American Red Cross. Know the law and

your responsibilities as a boat owner.

Any alteration, change, improper maintenance or abnormal

use by you which renders the engine or any of its components

unreasonably dangerous will void all warranties and Indmar will

not be liable for the resulting damages or injuries.

viii

EMISSIONCONTROLWARRANTYINFORMATION

The inboard engine in your boat includes

the Indmar Emission Control System

identiﬁed as SFI. It is also equipped

with heated oxygen sensors (HO2s),

2 catalytic converters (2 TWC) and an

onboard diagnostic system (OBD). The

fuel and ignition systems on your engine

meet the stringent requirements set forth

by the U.S. Environmental Protection

Agency (EPA) and the California Air

Resources Board (CARB). Indmar also

uses propylene glycol anti-freeze in the

closed cooling system of your engine to

reduce the environmental impact in the

event that anti-freeze is expelled from

the engine.

Your Indmar manufactured engine has

a special environmental label required

by the California Air Resources Board

(CARB). The label has 1, 2, 3 or 4 stars.

A hangtag, provided with your inboard engine, describes the

meaning of the star system.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Indmar Motor Handbücher

Indmar

Indmar OM0502-04 Bedienungsanleitung

Indmar

Indmar 5.7L MPI Bedienungsanleitung

Indmar

Indmar Assault 310 Carbureted Bedienungsanleitung

Indmar

Indmar 5.7L Vortec Bedienungsanleitung

Indmar

Indmar Raptor JET SERIES Bedienungsanleitung

Beliebte Motor Handbücher anderer Marken

Rotax

Rotax 125 senior MAX evo Bedienungsanleitung

Kohler

Kohler K361 Bedienungsanleitung

MTD

MTD OHV Series Bedienungsanleitung

Kohler

Kohler COMMAND CH18-745 Bedienungsanleitung

Mercury

Mercury D4.2L D-Tronic Bedienungsanleitung

Selve

Selve SE Plus-RC Series Bedienungsanleitung

Perkins

Perkins 1206E-E66TA Bedienungsanleitung

Skov

Skov DA 174 Handbuch

Rossi

Rossi TX11 Series Bedienungsanleitung

Siemens

Siemens SIMOTICS T-1FW3 Merkblatt

AL-KO

AL-KO PRO 350 Bedienungsanleitung

MTU

MTU 12 V 4000 Lx4 Bedienungsanleitung

Nanni

Nanni N3.30 Gebrauchsanweisung

Nanni

Nanni N5.160 CR2 Bedienungsanleitung

KSB

KSB SuPreme Series Montageanleitung

Hiwin

Hiwin EM1 Series Bedienungsanleitung

Rotax

Rotax 912 i series Betriebsanleitung

Siemens

Siemens SIMOTICS XP 1MB1 Bedienungsanleitung