Infinite Peripherals Imperea Bedienungsanleitung

Imperea

USER MANUAL

For iPhone® 6s / 7 / 8

User Manual | Imperea

Contact Information

Mobility Sales/ Technical Support Center

Innite Peripherals, Inc.

17681 Mitchell N

Irvine, CA 92614

Toll-Free: (877) 278-7860

Ofce: (949) 222-0300

Website: ipcmobile.com

Headquarters/ Main Warehouse

Innite Peripherals, Inc.

2312 Touhy Avenue

Elk Grove Village, IL 60007

Toll-Free: (800) 278-7860

Ofce: (847) 818-1260

Fax: (847) 818-1287

Compatible Devices

Legal Notice

“Made for iPhone” (MFi) means that an electronic accessory has been designed to connect specically to the iPhone and

has been certied by the developer to meet Apple performance standards. Apple is not responsible for the operation of this

device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an iPhone may

affect wireless performance.

• iPhone 6s

• iPhone 7

• iPhone 8

Trademarks

Innite Peripherals, Mobilize Your Enterprise, Linea Pro, Innea, Innea Tab, and Innea Omni are trademarks of Innite

Peripherals, Inc. All other trademarks are the property of their respective owners.

iOS Compatibility

User Manual | Imperea

Table of Contents

Legal Notice 2

Compatible Devices 2

Trademarks 2

Overview 4

Features 4

Accessories 4

Technical Speciﬁcations 5

Physical Dimensions 5

Connectivity 5

Certiﬁcates 5

Environment 5

Box Contents 6

Getting Started 6

Product Description 7

Assemble Your Imperea 8

Dissemble Your iOS Device from Imperea 9

Charge Imperea with the Single Charging Station 10

Battery Status 10

Developing Applications 10

Programmable Options 11

Charging Current 11

Set Charging 11

Enable Scan Button 11

Scan Mode 11

Pass-Through Sync 11

Idle Time 11

Using Your Imperea 12

Scan Barcodes 12

Servicing the Imperea 13

Replacing the Battery 13

Troubleshooting 14

Warranty 15

Disclaimer 15

Product Returns and Servicing 15

Symbols 16

Federal Communications Commissions 17

User Manual | Imperea

Visit our website at https://ipcmobile.com or contact your Innite Peripherals account representative for additional

information about our current and future product accessories.

Overview

Imperea is a durable, camera-based scanning device for your iOS device. As a high-speed scanning device with IP67 rating

for dust and moisture protection to withstand industrial conditions, Imperea includes a smart battery and intuitive SDK for

software integration.

Features

Camera-Based Barcode Scanner

Camera scanning SDK enables your iOS device to scan

any barcode even if poorly printed or curved.

Supports 1D/2D, 2D, 2D stacked, and 2D matrix barcode symbols

Single Charging Station with Wireless Qi

Technology

The smart battery uses wireless Qi technology that

charges both the Imperea battery and iOS device

simultaneously.

Battery Status

Four LEDs illuminate the battery status indication on

the back of Imperea.

Accessories

Battery

User swappable, rechargeable battery with 2100mAh

capacity. Supports wireless charging.

User Manual | Imperea

Connectivity

Certificates

Environment

Barcode Scanner

Camera-based scanning enables your iOS device to scan

all barcodes in all environments

Reads 1D/2D, 2D stacked, GS1, and 2D matrix barcodes

Temperature

Operation: 0°C to +40°C (32°F to 104°F)

Storage: -20°C to +65°C (-4°F to 149°F)

Relative Humidity

Operation and Storage: 5%-90%

CE, FCC, MFI, ROHS, UN38.3 for battery

Drop test MIL-STD-810 (4-ft to concrete)

IP67 rating

Battery

User-replaceable, rechargeable Lithium-Polymer

battery

3.7V, 2100mAH, 3.7 supporting wireless Qi charging

Smart battery with real-time charging status and

battery health for better battery management

Power Adapter

Custom power adapter included with single station

wireless charger

12 volts, 1.5A, 18W

LED Indicators

Four programmable LEDs on back of unit illuminate

when battery status button is pressed

Battery status colors: Blue, Green, Red, Amber

Accessories

Single station wireless charger

Input Voltage

5 volts

Technical Specifications

Physical Dimensions

Compatibility

iPhone 6s / 7 / 8

Dimensions (L x W x H)

160mm x 76.6mm x 18.6mm (6.3” x 3.01” x 0.73”)

Weight

155.129g (5.472 oz.) without iOS device

Buttons

Three user-congured blue buttons in the application

for features such as push-to-talk, camera, and

messaging

Battery status button on the battery

All existing iOS device buttons are accessible

Audio/Visual

Apple iPhone speakers and microphone

Front and back camera

User Manual | Imperea

Box Contents

• Before using your Imperea, remove the unit and any included accessories from the shipping cartoon and verify the contents against the packing list.

• Retain all packing materials, invoice, and bill of lading. These may be required to return the device for servicing later, or to process a claim with the

shipping carrier.

• Carefully inspect the contents inside of the packaging for any signs of damage. If there are signs of damage, do not attempt to use the unit. Notify your

account executive or contact technical support at https://ipcmobile.com/devices.

• Ensure the battery is fully charged prior to initial use.

Your Imperea and case includes a single-station charger with power adapter and a battery inside the unit.

Imperea (1) Single Station Charger (1)

Note:

Box contents and SKUs vary based on your order conguration.

Getting Started

The following helps you get the Imperea ready for use:

What to do Section

Connect Imperea with your iOS device Assemble Your Imperea

Remove your iOS device from Imperea Disassemble Your iOS Device from Imperea

Fully charge battery before rst use Charge Imperea with a Single Charger

Software required to run Imperea with an iOS device Developing Applications

Operating the Imperea Using Your Imperea

Note:

The barcode scanning feature requires the installation of software. Contact your Innite Peripherals account representative for available software via our

SDK.

User Manual | Imperea

Product Description

Camera

scanner

Battery latch

4 LEDs

Mute Ringer

Volume Control

USB Type-A connector

Scan button

Right/Left sides

User Manual | Imperea

Assemble Your Imperea

1. Remove the Imperea from the box, and then carefully twist a penny or the ply tool inside the bottom notch.

2. Twist the coin along the metal inside bottom notch to release the snap ttings on the bottom of the cover.

3. After the cover is loose, pull the remaining snap ttings with the coin along the top cover.

4. Place the unit on a at surface, and then slide the iPhone downwards towards the Lightning™ connector.

5. Once the iPhone is engaged with the Lightning connector, gently press the iPhone onto the unit.

6. Ensure the iPhone is seated property and ush with the rubber seals.

7. Place the front cover onto the unit with the snaps fully engaged.

User Manual | Imperea

Dissemble Your iOS Device from Imperea

1. Remove the Imperea from the box, and then insert a penny horizontally into the bottom notch.

2. Press rmly and twist a penny along the metal inside the bottom notch to release the snap ttings on the bottom of the

cover.

3. Once the bottom part of the cover is loose, carefully pull on the remaining snap ttings along the top cover.

4. With the top cover removed, take the Imperea and locate the camera opening on the reverse side.

5. Through the camera opening, press gently on the iPhone to release it from the rubber enclosure.

6. Once the top iPhone is released, slide the iPhone upwards, removing it from the Lightning connector.

7. Gently snap the top cover into place for safekeeping.

User Manual | Imperea

Charge Imperea with the Single Charging Station

Battery Status

To check the battery status, open the application on your iOS device and view the data. Your iOS device must be connected to

the Imperea before you can check the battery status.

Note:

When the status is above 20%, set the automated charge functionality to automatically charge the iOS battery.

Developing Applications

Software is not provided with your Imperea. Please contact your reseller or Innite Peripherals for Third Party software

solutions. Integrating the Imperea into your iOS application requires the use of the Innite Peripherals Universal Software

Developers Kit (SDK).

The SDK incorporates an API specically for developing applications to use Imperea functionality.

For additional details on using the Innite Peripheral Universal SDK, please refer to the appropriate SDK documentation.

For the latest Innite Peripheral Universal SDK, please visit our developer portal at:

https://developer.ipcmobile.com

Use the included power adapter when charging Imperea with the single charging station. The charging time is approximately

3 hours and 30 minutes to charge a fully depleted unit.

• For the charger to perform effectively, use the power adapter provided.

• To prevent electrical damage to the unit and/or battery, only use an approved USB Type-A cable.

1. Plug the USB-A end of the charging cable into the provided adapter. The top LED ashes green.

Note:

To prevent damage to the unit, do not plug the cable into a USB port on a computer or other adapter.

2. Place the unit on a single station charger, lining up the bump on the base of the charger with the bottom notch on the

Imperea.

3. Ensure the unit is centered on the charger, and then wait to hear the charging beep.

• This signals the Qi charging is starting.

• The LED light on the station blinks green when the unit is charging.

Andere Handbücher für Imperea

Inhaltsverzeichnis

Andere Infinite Peripherals Handy-Zubehör Handbücher

Infinite Peripherals

Infinite Peripherals Linea Pro 7 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Infinea X DF Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Infinea X IX-I2DBTR-PH5-WH Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Linea Pro 7 Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals CS-LP7I-PG Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals CBL-CUP-LP5PC-BK Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Imperea Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Infinea X DF Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals CS-LP5-PG Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals Infinea X Bedienungsanleitung

Beliebte Handy-Zubehör Handbücher anderer Marken

Valore

Valore AC14 Bedienungsanleitung

X-cam

X-cam X-CAM T3 Bedienungsanleitung

Nokia

Nokia AD-5B Bedienungsanleitung

Bauhn

Bauhn ABSS-1222 Bedienungsanleitung

ReSound

ReSound Phone Clip+ Bedienungsanleitung

Mpow

Mpow ISNAP X1 Bedienungsanleitung

Zartek Mobile

Zartek Mobile ZA-350 Bedienungsanleitung

Playbrush

Playbrush Playbrush Bedienungsanleitung

Sony

Sony SCR44 Bedienungsanleitung

Nautilus

Nautilus V5 Bedienungsanleitung

BigPantha

BigPantha Phone Mount Bedienungsanleitung

PRYME Radio Product

PRYME Radio Product PRYMEBLU BT-PTT-M Bedienungsanleitung

Nokia

Nokia CR-119 Bedienungsanleitung

weBoost

weBoost eqo Bedienungsanleitung

Rollei

Rollei LUMIS Bedienungsanleitung

Morphie

Morphie Juice Pack Helium Bedienungsanleitung

Lenovo

Lenovo SS100 Bedienungsanleitung

Philips

Philips DLA4214 Bedienungsanleitung