Infinite Peripherals Infinea mPos Tab Bedienungsanleitung
Infinea®mPOS Tab
USER MANUAL
For iPad®mini™ 4
USER MANUAL- INFINEA MPOS TAB
2
Contact Information
Legal Notice
iPad mini 4
Trademarks
Mobility Sales/ Technical Support Center
Innite Peripherals, Inc.
1641 McGaw Avenue
Irvine, CA 92614
Toll-Free: (866) 278-7860
Oce: (949) 222-0300
Fax: (949) 222-0375
Headquarters/ Main Warehouse
Innite Peripherals, Inc.
2312 Touhy Avenue
Elk Grove Village, IL 60007
Toll-Free: (800) 278-7860
Oce: (847) 818-1260
Fax: (847) 818-1287
Email: inf[email protected]
Website: ipcmobile.com
“Made for iPad mini” means that an electronic accessory has been designed to connect specically to an iPad mini 4 and has been certied by the developer
to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with an iPad mini 4 may affect wireless performance.
Compatible Devices
iOS Compatibility
Innite Peripherals, Mobilize Your Enterprise, Linea Pro, Innea, Innea Tab, and Innea Omni are trademarks of Innite Peripherals, Inc. All other
trademarks are the property of their respective owners.
USER MANUAL- INFINEA MPOS TAB
3
Table of Contents
Overview 4
Technical Data 4-5
Before Using Your Infinea mPOS Tab 6
Getting Started 6
Product Description 7
Turn on the Infinea mPOS Tab 8
Connect Your iPad mini 8
Keypad and Menu Navigation 8
Battery Charging 9
Replace the Battery 9
Minimize Deactivation 9
Operational Modes 10
System Mode Navigation 10-15
Pair with a Bluetooth Compatible Device 15
NFC LED Status Indicators 16
Scan Barcodes 16
Accept NFC Payments 17
Read Smart Cards 17
Read Magnetic Stripe Cards 18
Servicing the Infinea mPOS 18
SRED Information 18
Troubleshooting 19-20
Develop Infinea mPOS Apps 20
Warranty 20
Disclaimer 21
Product Returns and Servicing 21
Symbols 21
Federal Communications Commissions 22
USER MANUAL- INFINEA MPOS TAB
4
Visit our website, hps://ipcmobile.com or contact your Innite Peripherals account representative for additional information about our current and future
product accessories.
Overview
The Innea mPOS Tab is a hand-held PIN pad with an integrated smart card reader and magnetic stripe card reader, offering advanced security and smart
card processing capabilities. Innea mPOS Tab supports both symmetric encryption algorithms (DES, 3DES, and AES) and asymmetric encryption (RSA).
Managing multiple keys simultaneously through either Master Session- or DUKPT- based processes, and high performance smart card processing, as well as
support for the new generation of 3-volt cards.
(Optional) Barcode Scanner
2D high-speed imager
Magnetic Card Reader
Built-in 3-Track read head
Bi-directional reading capabilities
Minimum 1.97 in/sec swipe speed
1 million swipes mean time between failures
Bluetooth
BT version 3.0 power class 2 (optional)
BT version LE 4.2 (optional)
Battery
Rechargeable Li-ion Battery - 3.7 V/1300 mAh.
Smart Card Reader
Support for synchronous and asynchronous smart cards
Connectors
9-pin Lightning™ Connector and 10-pin female micro-B USB
connector
10-pin female micro-B USB
Features
Accessories
Physical Dimensions
Technical Data
Processor
Maxim USIP Professional, version IC400C
Compatibility
iPad mini 4
Dimensions (L x W x H)
145mm x 68 mm x 27 mm (5.7in x 2.7in x 1.1in)
Weight
188g (6.63 oz.) without iOS device
USER MANUAL- INFINEA MPOS TAB
5
Barcode Scanner
Newland 2D high-speed imager and supports all major 1D/2D
barcodes
Connectivity
Apple Lightning™ connector
NFC Payment Applications/Contactless Card Reader
AMEX ExpressPay MagStripe and EMV
Discover ZIP and D-PAS
MasterCard PayPass Magstripe and M/Chip
VISA PayWave MSD and qVSDC
Magnetic Card Reader
3-track bi-directional read head
ISO 7810, 7811, amd 7813
Encryption/Key Management
3DES, RSA 2048-bit, AES 128/256 DUKPT, MAster/Session, MAC
LEDs/audio
4 LEDs for transactions/status and electromagnetic buzzer
Smart Card Reader
ISO ISO7816, EMV L1 Certied
Battery Life
Approximately 500 transactions per fully-charged battery
Memory
128KB of SRAM
256KB of Loackable Flash Memory
128KB of ROM
Port
micro USB charge/sync
Application Memory
8MB applicable accessible ash
Buttons
Scan button plus keypad for On/Off, OK, Up/Down, Clear, and 10
numeric keys
Display
LCD, Monochrome, 128 x 32 pixels
Connectivity
Certifications
Environment
FCC/CE, Apple MFi, PCI PTS 5x SRED, EMV L1, EMV L2, EMV L1 Contactless
Temperature
Operation: -10°C to +40°C (14°F to +104°F) without iOS device
0°C to 35°C (32°F to +95°F) with iOS device installed
Storage: -20°C to +50°C (-4°F to +122°F)
Relative Humidity
Operation and Storage: 5% to 90%
USER MANUAL- INFINEA MPOS TAB
6
Before Using Your Infinea mPOS Tab
• Before using your Innea mPOS Tab, remove the unit and any included accessories from the shipping carton and verify contents against your packing
list.
• Retain all packing materials, invoice, and bill of lading. These may be required to return the unit for servicing later, or to process a claim with the carrier.
• Carefully inspect the packaging and contents for any signs of damage. If there are signs of damage, do not attempt to use the unit. Notify your account
executive or contact Innite Peripherals. hps://ipcmobile.com/devices
• Ensure the battery is fully charged prior to initial use.
Infinea mPOS Tab (1) USB cable (1)
Note:
Box contents and part numbers vary based on your order conguration.
Getting Started
The following helps you get the Innea mPOS ready for use:
What to do Section
Connect the Innea mPOS Tab with your iOS device Connect Innea mPOS Plus with your iOS Device
Charge your unit before rst use to ensure long battery life Charge Your Innea mPOS Tab
Install software on your iOS device for barcode scanning and smart card reading Develop Applications
Power on the unit Turn On Your Innea mPOS Tab
USER MANUAL- INFINEA MPOS TAB
7
Product Description
The front panel of the Innea mPOS Tab:
Scan
Button
Keypad
Magnetic
Stripe
Reader
(MSR)
NFC LED
Indicators
Chip Card Reader
NFC
Label
Opening
for iPad
Camera
Barcode Scanner
Scan
Button
The back panel of the Innea mPOS Tab:
Bottom view of the Innea mPOS Tab:
Charging Contacts
USB Port
iOS Volume
Button Access
9-Pin Lightning
Connector
USER MANUAL- INFINEA MPOS TAB
8
Connect Your iPad mini
1. To connect your iPad mini 4 with the Innea mPOS Tab, insert
the iPad into the grooves of the Innea mPOS Tab.
2. Slide the iPad onto the Lightning connector.
3. Wrap the edges of the case securely around the slides of the
iPad.
2
1
To turn on the Innea mPOS, tap the Power button on the top, right corner of the keypad. The name and version of the Secure Boot Loader and
rmware appear.
Turn on the Infinea mPOS Tab
Keypad and Menu Navigation
The buttons on the keypads access specic functions and allow you to navigate through the menu options and screens.
Note:
The keypad is ADA-compliant which means the Clear, OK, backspace, and the number 5 keys have distinct, raised markings at the bottom left corner of
each key.
Tap the appropriate button to perform the following:
1. Power to turn on the Innea mPOS
2. System Mode to enter system mode from the Home page
3. Up to scroll up through the menu options
4. Downs to scroll down through the menu options
5. OK to select the active option
6. Clear to return to the previous option or exit service mode OK
(Select)
System
Mode
Clear
(Exit Screen)
Power
Up
Down
USER MANUAL- INFINEA MPOS TAB
9
To minimize the potential for deactivation, follow all storage and operating temperature guidelines. Refer to Technical Specications for details.
Long term storage can cause temporarily decreased battery capacity. In order to recover maximum performance, it may be necessary to go through several
cycles of fully charging and discharging the battery.
When storing the device for longer than three months, the battery should be charged every three months at a minimum to prevent leakage, reduced
performance, and potential deactivation.
Minimize Deactivation
The main battery can only be replaced by Innite Peripherals. Attempting to disassemble a SRED-encrypted unit, renders it unusable and may void
your warranty.
Replace the Battery
Battery Charging
You can charge the Innea mPOS Tab with a micro USB adapter and USB cable or by using a charging station. The time to fully charge a depleted unit is
approximately 3 hours.
Battery Status Display Indicators
2 Lines - battery level >/=3.7V
3 Lines - battery level >/=3.8V
4 Lines - battery level >/=3.8V
5 Lines - battery level >/=4.0V
6 Lines - battery level >/=4.1V
Outside power from USB cable or power
station - plug
Battery charges from USB cable or power
station - flash
USB - connection with iPad
1 Line - battery level >/= 3.6V
During normal operations, the battery is constantly discharging. The
Battery Low message appears when the battery level is too low to
continue.
Charge the battery as soon as possible but no later than 25 days after
the message rst appears. Failure to charge within 25 days may lead
to deactivation and deletion of your stored encryption keys. This
requires you to return the Innea mPOS to Innite Peripherals. For
help, see hps://ipcmobile.com/support.
USER MANUAL- INFINEA MPOS TAB
10
Operational Modes
Conguration, system test, and status modes for the Innea mPOS:
• System
• Service
• Application Download
Note:
Service and Application Download modes should only be accessed by Innite Peripherals. Selecting specic keys or options in these modes may render
the unit unusable and require reactivation of the Innea mPOS.
System Mode Navigation
Turn on the Innea mPOS, and then tap System Mode on the keyboard. The menu options available are:
• Info Version
• Info Hardware
• Settings
• Test Display
• Test Keyboard
• Test MSR
• Test SCR
• Test Font0
• Test Font1
Info Version
• TDEV SN displays the serial number of your unit
• USIP SN shows the USIP serial number
• USIP VER is the current USIP version
• ISBL VER is the current USIP boot loader version
• HAL VER is the current Hardware Abstraction Layer or
Hardware Annotation Layer (HAL) version
• LOAD VER current Secure Boot Loader (SBL)
• FW VER current rmware version and name
• PINUTIL indicates the current library version
• PKFA VER displays the current version of the public key used for
rmware authentication
• PKAA VER displays the current version of the public key used for
application authentication
• PKKA VER displays the current version of the public key used
for manufacturing key authentication
ld bluepad500
info version
load ver: 2.2.7.0
fw ver: 2.4.35.0
Andere Handbücher für Infinea mPos Tab
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Infinite Peripherals Computerzubehör Handbücher
