Infinite FINA250 Bedienungsanleitung
FINA250 用户手册
User’s Manual
600001370
FINA250
December, 2006
Ve r s i o n 1 . 0
Thank you very much for your purchasing.
zIn order to use the machine correctly and safely and understand this product’s capability, please
read this manual carefully.
zThe manual includes equipment structure, description, technical parameters, operation manual,
safety information, application of software, etc.
zThis manual is subject to change without notice.
zContents herein contained are believed to be correct, however, please contact us if you find any
error or something not clear enough.
FINA250 用户手册
-1-
INDEX
CHAPTER 1SAFETY INFORMATION
1.1 Safety Cautions
1.2 Important Safety Information
1.3 Caution When Using Printer
1.4 Guide When Using Ink Cartridge
1.5 Choosing Printer Installation Place
1.6 Warning, Caution and Attention
CHAPTER 2TECHNICAL PARAMETERS
CHAPTER 3EQUIPMENT ASSEMBLY AND ADJUSTMENT
3.1 Assemble Printer
3.2 Portofprinter
3.3 Attention before Turning on the printer
3.4 Connect with power
CHAPTER 4EQUIPMENT STRUCTURE AND ACCESSORIES
CHAPTER 5 USAGE & MAINTENANCE OF PRINT HEAD
5.1 Usage of Xaar126 Print Head
5.2 Cleanneer and Maintenance of Print Head
CHAPTER 6 BASIC PANEL OPERATION
6.1 Menu Structure of Control Panel
6.2 Function Description in Details
6.3 MenuinUsage
6.4 Printing Steps
CHAPTER 7 DESCRIPTION OF INK SUPPLY COMPOSITIVE ASSISTANT BOARD
7.1 Ink Supplying and Cleaning System
7.2 Function and Operation Panel of Compositive Assistant Board
CHAPTER 8 INK SUPPLY SYSTEM
8.1 Summary
8.2 System Diagram
8.3 Function Description
8.4 Operation Description
FINA250 用户手册
-2-
8.5 Intelligent Detection Function
CHAPTER 9CLEANING SYSTEM
9.1 Summary
9.2 System Diagram
9.3 Operation Description
9.3.1 Manual Positive Pressure Cleaning
9.3.2 Cleaning Solvent Cleaning
CHAPTER 10 HEATING SYSTEM
10.1 Summary
10.2 Front-Rear Heater System
10.2.1 System Diagram
10.2.2 Function Description
10.2.3 Working Process and Characteristics
10.3 Dry System
CHAPTER 11 SOFTWARE OPERATIONS
11.1 Installation
11.2 Application Of Printer Driver
11.3 Adjustment of Equipment
11.3.1Adjustment of Vertical Distance
11.3.2Adjustment of Horizontal Distance
11.3.3 Adjustment of Step Correction
11.3.4Adjustment of Bidirectional Printing
11.4 Basic Operation of RIP
CHAPTER 12 MAINTENANCE AND CORRECTION
12.1 Daily Maintenance
12.2 Maintenance of Print Head
12.3 Maintenance of Ink Supply System
12.4 Maintenance for Other Parts
12.5 Warning and Correction of Main Board
Appendix 1 Motor Board Diagram
Appendix 2 Assistant Board Diagram
FINA250 用户手册
-3-
Appendix 3 Main Board Diagram
Appendix 4 PH Driving Board Diagram
Appendix 5 Operation Panel Diagram
Appendix 6 Power Supply Diagram
Appendix 7 Boards Connection Diagram
FINA250 用户手册
-1-
Do not use damaged Electrical Power wire.
If you use additional cable, please make sure that total amperage of the equipment connecting with cable
shall not exceed the amperage of the power supply. Moreover, the amperage of all equipment connecting
with wall socket does not exceed the amperage of the wall socket.
Do not repair Printer by yourself.
Shut off the power and ask experienced technician for help, if the following situations occur:
Power cable or plug is damaged.
Liquid splashes into printer.
Printer falls down or broken.
Printer cannot work properly or change in property.
1.3 Caution When Using Printer
•Don’t use your hand to move print head; otherwise the printer will be damaged.
•Always use power switch to turn On/off the printer. Before shutting down the Printer, do not pull out
Power Supply wire or Data Wire.
•Before moving the printer, please make sure the print head is fixed at original position.
1.4 Guide When Using Ink Cartridge
•Keep ink away from children. Do not let the children drink or touch.
•If ink spills on the skin, please wash with soap and water. If ink splashes into eye, please wash with water
immediately
•Do not shake the ink cartridge in case ink leak is caused.
•After using for a certain period (generally 3 months), you should take off the ink cartridge, clean it and
dry it.
1.5 Choosing Printer Installation Place
•Put printer at a horizontal and stable place with enough space; otherwise, the Printer may not work
properly.
•Don’t leave Printer at a place where temperature and humidity change severely. Avoid direct sunlight,
strong light or heat.
•Avoid shaking or vibrating.
•Keep sufficient room around printer for air circulation.
•Place printer nearby the wall socket, so that it is easy to connect or disconnect the power supply.
1.6 Warning, Caution and Attention
Warning
Users must obey in order to ensure personal safety.
Caution
FINA250 用户手册
-2-
Users must obey in order to protect the machine.
Attention
Contain some important and useful information about operation.
FINA250
-3-
Chapter 2 Technical Parameters
Figure 2-1 Printer Outlook
Product Model FINA250
Print Technique Xaar126
piezoelectric head,8 heads inside
Resolution 360dpi
720dpi
Printing Quality Photo Quality
Max Media Width 2540mm
Max Printing Width 2500mm
Output(M2/H)
360x360 29.6
360x720 14.7
720x720 7.3
Display LCD display with 8 key panel, self-diagnosis available
Ink Type Solvent-base inkC,M,Y,K
Ink Supply Mode 300 ml/min auto ink supply by electric pumpvolume of main tank 1000 ml/color
Ink Inspection System Auto/manual ink supply, low ink detector
Printing Driver Support many RIP drivers and operation platforms (Window 2000, XP, etc.)
Media Type Flex, vinyl, window film, polyester, etc
Media Input Roll media or sheet media (bigger than A4 or 210 mm)
Media Processing Auto feeding and take-up system ,weight less than 40 kg/roll
Print head Height 2 mm-3 mm above media adjustable
Pre-heater & Dry System Front-rear temperature control, Max temperature 65, Coo l f a n dry system
Clamp Manual adjustment media width
Printhead Cleaning
System Auto posotive pressure cleaning
Safety System Inside safety lock with auto shutting down function
Print Interface USB 2.0 Ports(Window 2000,NT,XP etc)
1440dpi
720x1440 3.8
FINA250
-4-
The parameters above are subject to change without notice.
Noise Printing status ≤ 60 dB/waiting status ≤ 40 dB (ISO 7779)
Printer Size (including
ink tank) / Net Weight L 3,600 mm W 870 mm H 1,295 mm/330 KG
Package Size / Weight L 3,720 mm W 925 mm H 1,090 mm/368 KG
Heating&Controlling
Voltage AC 100 --240 V /50HZ /60HZ
Input Media Voltage AC 220V / 50HZ / 60HZ AC 110V Optional
POWER
AC 220V Hour 3500W
Software Platform Window 2000 XP
Working Environment Temperature 20 30
Humidity 40% - 80%
ºC- ºC
FINA250 用户手册
-5-
Chapter 3 Equipment Assembly and Adjustment
3.1 Assemble Printer
1、Please tighten all screws on the supporter.
2、Put the printer on supporter with sufficient manpower. Make sure the printer stable enough.
3、Install auto ink supply system on right side.
4、Please connect all power cables correctly.
5、Install main ink tank in right side ink supply box and connect each ink pipe with ink hole correctly.
Figure 3-1 Main Ink Tank
1、Install waste ink tank. Connect each waste ink pipe with waste ink tank on both sides of printer.
2、Install Xaar 126 head.
3、Connect print head with control board.
Connection sequence as figure below:
K
Y
M
Ink Pipe
C1
C2
M1
M2
Y1
Y2
K1
K2
FINA250 用户手册
-6-
Figure 3-2 Connection Sequence
3.2 Port of Printer USB 2.0
Installation：
Connect the printer’s USB port with computer’s USB port directly by data cable.
USB driver procedure finishes automatically when Try Setup is installed.
3.3 Attention before Turning on Printer
1、In order to clean print head easily, please prepare following items:
•Flush solution
•Non-woven fabric.
2、In order to inspect temperature and humidity of printing environment, please prepare relative measurers.
Requirement for environment:
zTemperature: 20°C-30°C
zHumidity: 40% - 80%
3、Power supply
Please select for different countries or regions:
Control power supply: AC 100~240V 50/60 HZ
Heating, Feeding, Cleaning power supply: AC 100/240V 50/60 HZ (AC 100V optional）
Please choose the type of power shown on the printer in case of damage to the printer.
zMake sure the printer is well grounded.
zIt is better to use UPS stable-voltage power.
4、Requirement for computer
In order to avoid problems caused by computer, please choose high quality computer or brand computer.
3.4 Connect to Power
K1
K2
C1
C2
Y1 Y2 M1 M2
Inhaltsverzeichnis
