Infoblox Infoblox-2000-A Bedienungsanleitung

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Hardware Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

System, Environmental, and Power Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Installing an Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installing the Backup Battery Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Powering the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Cabling the Appliance to a Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Changing Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Changing Fan Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Changing Disk Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Changing the Backup Battery Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Accessing the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Connecting to the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Specifying Appliance Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Infoblox GUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Infoblox CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Managing the Disk Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

The contents of this document may not be copied or duplicated in any form, in whole or in part, without the prior

written permission of Infoblox, Inc.

The information in this document is subject to change without notice. Infoblox, Inc. shall not be liable for any

damages resulting from technical errors or omissions which may be present in this document, or from use of this

document.

This document is an unpublished work protected by the United States copyright laws and is proprietary to Infoblox,

Inc. Disclosure, copying, reproduction, merger, translation, modification, enhancement, or use of this document by

anyone other than authorized employees, authorized users, or licensees of Infoblox, Inc. without the prior written

consent of Infoblox, Inc. is prohibited.

For Open Source Copyright information, see Open Source Copyright and License Statements in the Infoblox

Administrator Guide.

Infoblox Installation Guide

For the Infoblox-2000-A Appliance

Contents

2 Infoblox Installation Guide

Trademark Statements

Infoblox, the Infoblox logo, Grid, NIOS, bloxTools, NetMRI and PortIQ are trademarks or registered trademarks of

Infoblox Inc.

All other trademarked names used herein are the properties of their respective owners and are used for

identification purposes only.

Warranty Information

Your purchase includes a 90-day software warranty and a one year limited warranty on the Infoblox appliance, plus

an Infoblox Warranty Support Plan and Technical Support. For more information about Infoblox Warranty

information, refer to the Infoblox website, or contact Infoblox Technical Support.

Company Information

Infoblox is located at:

4750 Patrick Henry Drive

Santa Clara, CA 95054-1851, USA

Web: www.infoblox.com

www.infoblox.com/support

Phone: 408.625.4200

Toll Free: 888.463.6259

Outside North America: +1.408.716.4300

Fax: 408.625.4201

Product Information

Hardware Models: Infoblox-250-A, 550-A, -1050-A, -1550-A, 1552-A, -1852-A, and -2000-A

Document Number: 400-0290-000 Rev. A

Document Updated: August 25, 2010

For the Infoblox-2000-A Appliance 3

Introduction

This guide provides an overview of the Infoblox-2000-A network services appliance running Infoblox NIOS version

5.1r1-4 and later, and explains how to install and configure it.

Figure 1 Tasks in This Guide

Product Overview

The Infoblox-2000-A network services appliance provides reliable, scalable, and secure core network services

including DNS (Domain Name System), DHCP (Dynamic Host Configuration Protocol), IPAM (IP Address

Management), IF-MAP, and more. The integrated Infoblox approach combines the simplicity of appliances with the

power of advanced distributed database technology to control and automate services while achieving availability,

manageability, visibility, and control unparalleled by conventional solutions based on legacy technologies. You can

configure and manage the Infoblox-2000-A through an easy-to-use Infoblox GUI that works seamlessly in Windows,

Linux, and Mac environments using standard web browsers.

The Infoblox-2000-A is a full-featured appliance with hot-swappable power supplies, fan modules, and hard disk

drives. The Infoblox-2000-A is a Class A digital appliance per FCC regulations, and it is RoHS and WEEE compliant.

The Infoblox-2000-A belongs to the modular Infoblox product line that includes the Infoblox-250-A, -550-A,

-1050-A, -1550-A, -1552-A, and -1852-A. For information about the Infoblox platforms, visit the Infoblox web site

at www.infoblox.com.

Learn about the Infoblox appliances.

"Introduction" on page 3

Install appliances.

"Installing an Appliance" on page 11

Equipment

Rack

Power

Source

Management

System

Network

Access appliances.

"Accessing the

Appliance" on page 21

Introduction

4 Infoblox Installation Guide

Hardware Components

The Infoblox-2000-A is a 3-U platform that you can easily mount in a standard equipment rack using the mounting

brackets and bolts that ship with each appliance. The front panel components include the LCD (liquid crystal

display) panel and navigation buttons, communication ports, hard disk drives, and indicator lights. The back panel

components include power connectors and switches, fans, air vents, and a backup battery unit.

Front Panel

The front panel components are shown in Figure 2 and described in Table 1. For explanations of the Ethernet port

LEDs, and console and Ethernet port connector pin assignments, see Ethernet Port LEDs on page 6 and Connector

Pin Assignments on page 6.

Figure 2 Infoblox-2000-A, Front View

Table 1 Front Panel Components

Component Description

LCD Panel An LCD screen that displays HA (high availability) status, network settings, software version

number, hardware serial number, and software licenses. Additionally, you can view and

configure the IP address, netmask, and gateway for the LAN1 port.

USB Ports MGMT PortConsole Port

Power Indicators

HA Port LAN2

Port Drive Indicators

LCD Panel Navigation

Buttons LAN1

Port

Drive 1

Drive 2

Drive 3

Drive 4

Hardware Components

For the Infoblox-2000-A Appliance 5

Navigation

Buttons

Buttons that allow you to enter the IP address, netmask, and gateway of the LAN1 port

through the LCD. Use the Up and Down arrow buttons to specify numbers and the Left and

Right buttons to navigate across digits. You must specify whether to save input (OK) or

discard it (CNCL). Selecting CNCL at any time returns you to the previous entry. Entering

OK on the third screen returns you to the system status screen.

USB Ports Reserved for future use.

Console Port A male DB-9 serial port for a console connection to change basic configuration settings

and view basic system functions through the CLI (command line interface). Use the serial

cable and connection adapters that ship with the appliance to make a console connection

to this port.

Only a properly grounded USB-to-Serial dongle is allowed to connect to the serial console

port. If the dongle is connected to a laptop, this laptop must be grounded properly as well.

Failure to do so may result in damage to the serial console port of the Infoblox appliance.

Infoblox is not responsible for such damage.

Power Indicators An LED for each power supply (PS1 and PS2). The LED glows green when the power supply

has power. The LED is dark when the power supply does not have power.

MGMT Port A 10/100/1000-Mbps Ethernet port that you can use for appliance management or DNS

service. You can enable the MGMT port and define its use through the Infoblox GUI.

HA Port A 10/100/1000-Mbps gigabit Ethernet port through which the active node in an HA (high

availability) pair connects to the network using a VIP (virtual IP) address. HA pair nodes

also use their HA ports for VRRP (Virtual Router Redundancy Protocol) advertisements.

LAN1 Port A 10/100/1000-Mbps gigabit Ethernet port that connects a NIOS appliance to the

network. You must use the LAN1 port to set up the appliance initially. It handles all traffic if

you do not enable the MGMT and LAN2 ports. The passive node in an HA pair uses this port

to synchronize the database with the active node.

LAN2 Port A 10/100/1000-Mbps gigabit Ethernet port that connects a NIOS appliance to the

network. The LAN2 port is not enabled by default. You can enable the LAN2 port and define

its use through the Infoblox GUI after the initial setup.

Disk Drives Four hot-swappable hard disk drives configured in a RAID (Redundant Array of

Independent Disks) 10 array. Each disk drive has two LEDs that indicate the connection

and activity status on the disk drive. The top LED glows blue when the disk drive is

connected and operational, and the lower LED is green during read-write operations. The

LEDs are dark when the disk drive is not connected.

Component Description

Introduction

6 Infoblox Installation Guide

Ethernet Port LEDs

To see the link activity and connection speed of an Ethernet port, you can look at its Link/Act and Speed LEDs.

Figure 3 LEDs

Connector Pin Assignments

An Infoblox appliance has three types of ports on its front panel:

•USB ports (reserved for future use)

•Male DB-9 console port

•RJ-45 10Base-T/100Base-T/1000Base-T auto-sensing fast Ethernet ports

The DB-9 and RJ-45 connector pin assignments are described in Figure 4. The DB-9 pin assignments follow the

EIA232 standard. To make a serial connection from your management system to the console port, use the RJ-45

rollover cable and two female RJ-45-to-female DB-9 adapters that ship with the appliance. The RJ-45 pin

assignments follow IEEE 802.3 specifications.

10Base-T Ethernet and 100Base-T Ethernet use the same two pairs of wires. The twisted pair of wires connecting to

pins 1 and 2 transmit data, and the twisted pair connecting to pins 3 and 6 receive data. For 1000Base-T

connections, all four twisted-pair wires are used for bidirectional traffic. All Infoblox Ethernet ports are auto-sensing

and automatically adjust to standard straight-through and cross-over Ethernet cables.

MGMT and HA Ports LAN Ports

Label Color Port Status Label Color Port Status

Link/Act Steady Yellow Link is up but inactive Link/Act Steady Amber Link is up but inactive

Blinking Yellow Link is up and active Blinking Amber Link is up and active

Dark Link is down Dark Link is down

MGMT, HA, and LAN Ports

Label Color Port Status

Speed Steady Amber 1000 Mbps

Steady Green 100 Mbps

Dark 10 Mbps

Hardware Components

For the Infoblox-2000-A Appliance 7

Figure 4 Connector Pin Assignments

21 345

6789

21346578

78653421

DB-9 Connector Pin Assignments

RJ-45 Connector Pin Assignments

Pin 10Base-T

100Base-T

Signal

1000Base-T

Signal

T568A

Straight-Through

Wire Color

T568B

Straight-Through

Wire Color

1Transmit+ BI_DA+ White/Green White/Orange

2Transmit- BI_DA- Green Orange

3Receive+ BI_DB+ White/Orange White/Green

4 (not used) BI_DC+ Blue Blue

5 (not used) BI_DC- White/Blue White/Blue

6Receive- BI_DB- Orange Green

7 (not used) BI_DD+ White/Brown White/Brown

8 (not used) BI_DD- Brown Brown

Male DB-9 Console Port

RJ-45 Ethernet Ports

Pin Signal Direction

1 (not used)

2Receive Input

3Transmit Output

4DTEReady Output

5 Ground —

6 DCE Ready Input

7 RTS (Request to Send) Output

8 CTS (Clear to Send) Output

9 (not used)

Legend: BI_D = bidirectional; A, B, C, D = wire pairings

(Looking into the console

port on an Infoblox

appliance)

(Looking into RJ-45

Ethernet ports on an

Infoblox appliance)

Introduction

8 Infoblox Installation Guide

Rear Panel

The Infoblox-2000-A has dual power supplies and three fan modules. The power supplies and fan modules are hot

swappable, so you can replace any one of them at a time without disrupting the operations of the appliance.

Figure 5 Infoblox-2000-A, Rear View

Table 2 Rear Panel Components

Component Description

Fan Modules Three hot-swappable fan modules to help maintain optimum operating temperature.

Each fan has an air vent that allows warm air to flow out of the appliance. Do not

obstruct.

Power Supplies Each of the two redundant power supplies has a three-prong power outlet for connecting

the appliance to a standard AC (Alternating Current) or DC (Direct Current) power source.

On/Off Switch A power switch on each power supply to turn it on and off.

Power LEDs Each power supply has an LED that glows green when the power supply has power. It is

dark when the power supply does not have power.

Disk Controller

Backup Battery

Unit

A battery that provides backup power for the RAID controller cache memory in the event

of a power failure.

Power Outlets Fan Module 1

On/Off

Switches

Power

Supply 1

Disk Controller

Backup Battery

Power

Supply 2

Fan Module 2 Fan Module 3

System, Environmental, and Power Specifications

For the Infoblox-2000-A Appliance 9

System, Environmental, and Power Specifications

System specifications describe the physical characteristics of each appliance. Environmental specifications

describe the temperature and moisture limits it can withstand. Power specifications describe the electrical range

within which the appliance circuitry can operate.

System Specifications

•Form Factor: 3-U rack-mountable appliance

•Dimensions: 5.25” H x 17.6” W x 22.75” D (13.4 cm H x 44.8 cm W x 57.8 cm D)

•Weight: Approximately 48 pounds (21.8 kg)

•Ethernet Ports: MGMT, HA, LAN1, LAN2 – auto-sensing 10Base-T/100Base-T/1000Base-T

•Serial Port: DB-9 (9600/8n1, Xon/Xoff)

•USB Ports: Two USB 2.0 compliant/1.1

•LCD Panel: LCD (liquid crystal display) with input buttons

Environmental Specifications

•Operating Temperature: 41 to 95 degrees F (5 to 35 degrees C)

•Storage Temperature: 23 to 122 degrees F (-5 to 50 degrees C)

•Relative Humidity: 5% to 95%, relative humidity (non-condensing)

•Average Heat Dissipation: 1400 BTU (British Thermal Units)/hour

Electrical Power Specifications

•AC Power Supply

—Model Number: RAK540MV-ZZ

—Input Voltage

— U.S.: 100 – 240 VAC switchable, 50 – 60 HZ, 8 A, redundant, dual input

— Europe: 208 – 265VAC, 50 – 60Hz, 4 A, redundant, dual input

—Output Power: 540 watts each

Introduction

10 Infoblox Installation Guide

•Power plug and cable specifications by region:

Region Plug Type Cable Type Max Power Rating Max Temperature Rating

North America NEMA5-15P

3-prong male plug

VCTF 3C 18 AWG 10A, 125 V 75° C

Japan NEMA5-15P

3-prong male plug

VCFI 3G 12A, 125 V 60° C

Europe CEE7 standard VII

2-prong male plug

H05VV-F 6A, 250 V 70° C

United Kingdom LP-60L 3-prong male

plug with fuse

H05VV-F 10A, 250 V 70° C

China RVV 300/ 500 3C X

1.00mmSQ

IEC 320 C 13/

GB2099.1 G

B1002

10A, 250V 70° C

Taiwan VCTF 3x1.25mm

70° C

IEC-60320-C13

(BME)/

BLACK-ICC

10A, 125V 70° C

Australia

New Zealand

RVV 300/500 3C X

1.00mmSQ

IEC 320 C13/

GB2099.1

GB1002

10A, 250V 70° C

India

South Africa

1.0/3 HO5VVF3

70° C

IEC-320

C-13/BS

546SABS

10A, 250V 70° C

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Infoblox Firewall Handbücher

Infoblox

Infoblox Infoblox-550 Bedienungsanleitung

Beliebte Firewall Handbücher anderer Marken

Cisco

Cisco S190 Bedienungsanleitung

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Cisco

Cisco 3110 Handbuch

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung