Infortrend EonNAS Pro 500 Bedienungsanleitung

QMN A S P 5 A U R 1 1

2-1.

Eo n NAS P ro 50 0

Power

socket

2-2. Connect an Ethernet cable from

your switch to the LAN1 port.

Package Contents:

1. EonNAS Pro 500

2. Power cable

3. Hard drive screws (40pcs)

4. Product CD

5. Quick installation Guide

Please make sure you have received all items listed below:

6. Ethernet cable x2

EonNAS Pro 500

Quick Installation Guide

Hard Disk Drives Installation

Making Connections

11 LAN 1

Unpack the equipment and make sure the following tools are available before the

installation.

Small flat-blade screwdriver

Phillips screwdriver

Tools required User provided components

Getting Started

Warning

DO NOT remove more than one hard disk drive trays from the

enclosure at the same time!

We strongly recommend populating all drive slots with hard disk

drives to complete the configuration all at once.

1-3. Secure the hard drive

with four hard drive screws.

1-2. Press the release button to open

the tray bezel and gently pull the

top tray out of the system enclosure.

1-4. With the tray bezel open, insert the

hard drive and tray into the system

enclosure. Close the tray bezel.

1-5. Use the small flatblade screwdriver

to rotate the bezel lock from un-lock

to the lock position.

Note: hard drive data will be erased!

1-6. Repeat procedures 1-2 to 1-5 to install other hard drives. Always install from

top to bottom and close the system front panel cover after hard drive

installation.

Lock

Release button

Install at least two (2) 3.5" SATA

hard drive (up to 3TB per drive).

It is recommended to install identical

hard drives into all trays.

1-1. Open enclosure’s front panel cover.

Connector end

Rebooting ......

SELECT

ENTER

EonNAS Pro

Initializing ...

3-3. During quick initialization, the LCD will show “Initializing...”.

Powering-up & Initializing EonNAS

3-1. Press the power button and the following should occur: power button illuminates

blue; LCD shows “System booting..” and the following LED lights up.

Please turn over the page and continue the installation process!

Note: To configure the system manually, press ENTER when the cursor is

pointing at “no.” See the Appendix section in the next page.

Power

button

SELECT

ENTER

EonN AS Pro

System booting..

3-2.

SELECT

button

SELECT

ENTER

EonNAS Pro

Quick Initialize

yes no ENTER

button

QIG V1.1 based on FW 1.1.39

Connect the molded plug end of the

power cable to the power socket

and the pin end of the power cable

to a power outlet.

Approx. 3 minutes later, a “Quick Initialize” screen appears. Press “SELECT”

to bring the cursor from “no” to “yes” and press ENTER to begin quick

initialization. The following LEDs light up.

Appendix: Manually Initializing Your EonNAS

Note: This section is applicable only if you have selected “no” to Quick Initialization in

Section 3.

After the IP address has appeared in the LCD screen, follow these steps.

(If the IP address “10.0.0.2" appears on the LCD, please refer to the Web-Interface

Manual on the CD-ROM for configuration.)

Step 1: Entering the Startup Wizard

Open the browser and enter the IP address of your EonNAS system. The Startup Wizard

screen will appear.

Step 2: Configuring System Settings

Configure the basic system parameters.

Host Name: Enter a unique name for your EonNAS system.

Timezone: Select your local time zone.

Password: Enter a new password for the admin account (the default is admin).

Step 5: Adding Users

A user account Guest (username: guest, password: guest) will be created.

Add new users or modify existing accounts and click OK.

Step 6: Creating Shared Folders

A new shared folder called EonShare will be created.

Add more shared folders or modify existing folders and click OK.

Step 7: Completing the Initialization

View the summary of configurations. Click Back to modify the parameters or Apply

to complete the Startup Wizard.

Your EonNAS system will complete the initialization in approximately 10 minutes.

Go to Section 5 and 6 to start using your EonNAS system.

Step 3: Configuring the IP Address

The current IP address setting appears. Make changes if necessary and click OK.

Step 4: Creating a Virtual Storage Pool

By default, a new pool called EonPool will be created. Change the pool name and RAID level if

necessary and click OK.

The Web Interface allows you to configure system settings of your EonNAS.

6-1. Open the browser and enter the IP address of your EonNAS system.

6-2. The Web Interface will appear.

6-3. Select your preferred language from

the top right menu.

6-4. Enter the administrator login account and click Login.

Username: admin

Password: admin

4Locating Your EonNAS System

Host Name

Timezone

Password

Confirm Password

EonNAS_Pro_500

(GMT-08:00)America/Los_Angeles

Using the Web Interface

4-2. An IP address will appear (shown as xxx.xxx.xxx.xxx below).

SELECT

ENTE R

EonNAS Pro

Eo nN AS_ Pr o _5 00

xx x. xxx .x x x. xx x

Note: If the IP address “10.0.0.2" appears on the LCD, please refer to the

Web-Interface Manual on the CD-ROM for configuration.

SELECT

ENTE R

EonNAS Pro

Re bo ot. ..

4-1. After approx. 10 minutes, the LCD will show “Reboot...”and approximately 2 minutes

after that, 2 beeps will sound and system reboots.

4-3. Please move onto the next section to start using your EonNAS system.

5Uploading/Downloading Files

SELECT

Once your EonNAS system has been initialized, you can start uploading or downloading your data in

your desktop environment. Here we will introduce how to do so in Windows OS.

5-1. Press both the Windows key and r key (Windows + r) to bring up the Run Command interface.

Enter “\\IP address” (of your EonNAS system) and click OK. Example: \\192.168.5.113

5-2. Enter the following account information that was created during Quick Initialization and click OK.

Username: guest

Password: guest

5-3. You should be able to access shared folders in your EonNAS system.

Copy and paste data to and from your EonNAS as if you were using Windows File Manager.

Note: You can also use the guest user account to enter the Explorer menu in the

Web Interface.

Andere Handbücher für EonNAS Pro 500

Andere Infortrend Lagerung Handbücher

Infortrend

Infortrend EonStor S12E-R1132-4 Bedienungsanleitung

Infortrend

Infortrend EonStor DS 4000 Series Bedienungsanleitung

Infortrend

Infortrend EonStor DS 3000 Series Bedienungsanleitung

Infortrend

Infortrend EonStor S12S-G1033 Bedienungsanleitung

Infortrend

Infortrend EonStor GS Series Bedienungsanleitung

Infortrend

Infortrend EonStor F16F-R4031-6/4 Bedienungsanleitung

Infortrend

Infortrend EonStor S12F-R1432 Bedienungsanleitung

Infortrend

Infortrend EonServ 5000 Gen2 Series Bedienungsanleitung

Infortrend

Infortrend EonStor CS Series Bedienungsanleitung

Infortrend

Infortrend EonStor GS 3000 Series Bedienungsanleitung

Infortrend

Infortrend EonStor GSe Pro 108 Bedienungsanleitung

Infortrend

Infortrend EonStor A16F Bedienungsanleitung

Infortrend

Infortrend EonNAS Pro Series Bedienungsanleitung

Infortrend

Infortrend EonStor GSe Pro 2000 Series Bedienungsanleitung

Infortrend

Infortrend S12 Series Bedienungsanleitung

Infortrend

Infortrend EonStor DS 1024B Bedienungsanleitung

Infortrend

Infortrend EonStor CS Series Bedienungsanleitung

Infortrend

Infortrend EonStor GS Series Betriebsanleitung

Infortrend

Infortrend EonNAS Pro 500 Bedienungsanleitung

Infortrend

Infortrend EonStor DS 3000 Series Bedienungsanleitung

Infortrend

Infortrend EonStor U16U-G4010 Bedienungsanleitung

Infortrend

Infortrend EonStor CS Betriebsanleitung

Infortrend

Infortrend EonStor A12E-G2121 Bedienungsanleitung

Infortrend

Infortrend EonStor GS 1000 Gen2 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

HP P9000 Bedienungsanleitung