Infosystem Technology Corporation WM-112 Bedienungsanleitung

M-

-1

User Manual

Version 1.0

Infos

stem Technolo

Corporation, Ltd.

Serial to Ethernet Module

WM-112

Serial to Ethernet Module

WM-112

Serial to Ethernet Module

Index

1. Disclaimers ．．．．．．．．．．．．．．．．．．．．．．．．．． 1.

A. Warranty ．．．．．．．．．．．．．．．．．．．．．．．．． 2.

B. Trademark ．．．．．．．．．．．．．．．．．．．．．．．． 2.

2. Product Information ．．．．．．．．．．．．．．．．．．．．．．． 3.

A. Introduction ．．．．．．．．．．．．．．．．．．．．．．．． 3.

B. Features ．．．．．．．．．．．．．．．．．．．．．．．．． 4.

C. Applications ．．．．．．．．．．．．．．．．．．．．．．． 5.

3. Exterior ．．．．．．．．．．．．．．．．．．．．．．．．．．． 6.

A. Top View ．．．．．．．．．．．．．．．．．．．．．．．．． 6.

B. PINAssignments ．．．．．．．．．．．．．．．．．．．．．． 6.

C. PIN Descriptions ．．．．．．．．．．．．．．．．．．．．．． 7.

4. Software Installation ．．．．．．．．．．．．．．．．．．．．．．． 8.

A. Install ．．．．．．．．．．．．．．．．．．．．．．．．． 8.

-Step 1: Insert the CD and click the button ．．．．．．．．．．． 8.

-Step 2: Click the Link of the Page ．．．．．．．．．．．．． 9.

-Step 3: Press Next to Continue ．．．．．．．．．．．．．． 10.

-Step 4: Decide theApplication Directory ．．．．．．．．．．． 11.

-Step 5: Create the Directory if not existent ．．．．．．．．．． 12.

-Step 6: Create Program’s Shortcut ．．．．．．．．．．．．． 13.

-Step 7: Decide if Desktop icon needed ．．．．．．．．．．．． 14.

-Step 8: Press Install to start installation ．．．．．．．．．．． 15.

-Step 9: Process Installations ．．．．．．．．．．．．．．． 16.

-Step 10: Finish Installation ．．．．．．．．．．．．．．．． 18.

B. Uninstall ．．．．．．．．．．．．．．．．．．．．．．．．． 18.

-Step 1: Uninstall Ethernet Converter ．．．．．．．．．．．． 18.

-Step 2: Processing ．．．．．．．．．．．．．．．．．．． 19.

-Step 3: Finished ．．．．．．．．．．．．．．．．．．．． 19.

WM-112

Serial to Ethernet Module

WM-112

Serial to Ethernet Module

Index

5. Configuration ．．．．．．．．．．．．．．．．．．．．．．．．． 20.

A. By Browser ．．．．．．．．．．．．．．．．．．．．．．． 20.

-Step 1: Ready to login．．．．．．．．．．．．．．．．．． 20.

-Step 2: Configure your parameters ．．．．．．．．．．．．． 21.

-Step 3: Finish and reboot．．．．．．．．．．．．．．．．． 22.

B. By Setup Tools ．．．．．．．．．．．．．．．．．．．．．． 23.

-Step 1: Searching the devices ．．．．．．．．．．．．．．． 23.

-Step 2: Double click the selected item ．．．．．．．．．．．． 23.

-Step 3: Configure and update your parameters ．．．．．．．．． 24.

C. By Direct Broadcast Commands ．．．．．．．．．．．．．．．． 25.

-Command ListA ．．．．．．．．．．．．．．．．．．．． 25.

-Command List B ．．．．．．．．．．．．．．．．．．． 26.

-Command List C ．．．．．．．．．．．．．．．．．．． 27.

6. Parameter Description ．．．．．．．．．．．．．．．．．．．．．． 28.

7. Application Notes ．．．．．．．．．．．．．．．．．．．．．．．． 34.

A. Description ．．．．．．．．．．．．．．．．．．．．．．． 34.

B. Disable Firewall of Windows XP SP2 ．．．．．．．．．．．．．． 34.

-Step 1: Execute “Windows Firewall” ．．．．．．．．．．．．． 34.

-Step 2: Close the Firewall ．．．．．．．．．．．．．．．． 35.

C. Make Program exception for Firewall ．．．．．．．．．．．．．．． 36.

-Step 1: Choose “Exception” ．．．．．．．．．．．．．．． 36.

-Step 2:Add on New Program ．．．．．．．．．．．．．．． 37.

-Step 3:Allow “Accept any Computer” ．．．．．．．．．．．． 38.

-Step 4: Finished ．．．．．．．．．．．．．．．．．．． 39.

8. Appendix ．．．．．．．．．．．．．．．．．．．．．．．．．．． 40.

WM-112

Serial to Ethernet Module

WM-112

Serial to Ethernet Module

Disclaimers

The information in this manual has been carefully checked

and is believed to be accurate. Infosystem Technology

Corporation, Ltd. assumes no responsibility for any

infringements of patents or other rights of third parties,

which may result from its use.

Infosystem assumes no responsibility for any inaccuracies

that may be contained in this document. Infosystem makes

no commitment to update or to keep current the information

contained in this manual.

Infosystem reserves the right to make improvements to this

document and/or product at any time without notice.

No part of this publication may be reproduced, stored in a

retrieval system, or transmitted in any form of or by any

means, electronic, mechanical, photocopying, recording, or

otherwise, without the prior written permission of

Infosystem Technology Corporation, Ltd.

WM-112

Serial to Ethernet Module

WM-112

Serial to Ethernet Module

Warranty

All products manufactured by Infosystem are warranted

against defective materials for a period of one year from the

date of delivery to the original purchaser.

Trademark

The names used for identification only maybe registered

trademark of their respective companies.

WM-112

Serial to Ethernet Module

WM-112

Serial to Ethernet Module

Product Information

A. Introduction

WM is module-based product and it can provide an ideal

solution to customized embedded systems. By embedding

WM Products into customized systems, you can easily

implement Serial to Ethernet Converting affairs.

WM-112 uses SoC for implementing RS232 to Ethernet

functions. It uses the state machine to handle TCP/IP stack

and brings the user a lower cost TCP/IP stack with limited

functions because of the limited resources.

WM-112 is a small size and low cost module solution. It is

easy to implement applications in IA, Factory Automation,

Security or any other low data rate data transmission by

using it as the coprocessor. It supports ARP, ICMP, TCP,

UDP, IP, DHCP-Client and even HTTP protocols. It

supports 10/100M speed at Ethernet port and 115.2Kbps on

Serial Port. You may use any browsers to set the parameters,

or just use the commands in console mode with setup tools.

With no doubt, WM-112 will bring you the easiest

managements in your applications.

WM-112

Serial to Ethernet Module

WM-112

Serial to Ethernet Module

B. Features

¾Easy Configuration Setting

9Software Setup Tool for Configuration Setting

9Use HTTP, IE/Netscape Browser for Setting

¾Good Security Concerned

9Setup Login in Password Protect

9Access Password Protect

9Support New Version Firmware Upgradeable

¾Low cost and High Reliability

9Cheap and stable

9Working 24Hours per day

¾Low Power Consumption

9Less than 1W Power Consumption

¾Support Necessary Network Protocols

9ARP, ICMP, TCP, UDP, IP, DHCP Client, HTTP

¾Support Various Interfaces (Universal Set)

9RJ-45 x 1, 10/100M, Auto MDI/MDIX

9Serial Port x 1, 115.2Kbps, RTS/CTS H/W flow control

9RS-232/RS-485/RS-422 Software Configurable

Half Duplex for RS485

Full Duplex for RS-422

5 bits Digital I/O (Modbus/TCP, Port 502)

¾Three Independent Sockets

9Support multi sockets for serial port and Digital I/O port

9All protocol working independent and concurrently

WM-112

Serial to Ethernet Module

WM-112

Serial to Ethernet Module

C. Applications

¾Data collection

¾Security Terminals

¾Access Control Terminals

¾Security Devices

¾Time Recorders

¾Warehouse Terminals

¾Shop floor automation Terminals

¾Remote Sensors and Various Meters

¾Power monitors

¾Power meters

¾Environmental monitors

¾Temperature monitors

¾Data loggers

¾Data Acquisitions

¾Auto-ID Scanners

¾Barcode Scanners

¾Magnetic Card Readers

WM-112

Serial to Ethernet Module

WM-112

Serial to Ethernet Module

Exterior

A. Top View

B. PIN Assignment

WM-112 Module

TPRX-

TPRX+

VCC

LED_LINK

LED_RX

LED_TX

LED_SYS

GND

TPTX-

TPTX+

SHIELD

IO6

12 ISP/SETUP 13

IO5/RS485 14

/RST 15

IO0 16

IO1 17

IO2 18

RXD 19

TXD 20

RTS 21

CTS 22

IO3 23

IO4 24

WM-112

Serial to Ethernet Module

WM-112

Serial to Ethernet Module

Exterior

C. PIN Descriptions

PIN Name Type Description

1 TPRX- I

The AUI receive input pairs carries the differential receives

input signal from the MAU.

2 TPRX+ I Same as the Pin 1, it is a positive differential input of theAUI.

3 VCC P +5V DC Power

4 LED_LINK O Active Low,Active while the UTP cable is plugged and link

5 LED_RX O Blinking while receiving a Ethernet Packet.

6 LED_TX O Blinking while transmitting a Ethernet Packet.

7 LED_SYS O

There are three signal states of this LED

1. Blinking Per second while normal operation

2. Blink Fast while power on do self test.

3. Low while error or restored factory default parameter

8 GND P GND, DC power

9 TPTX- O

This is AUI transmit output pair contains the differential line

drivers which send Manchester encoded data to the MAU.

10 TPTX+ O Same as Pin 9, it is the Positive differentials transmit out.

11 SHIELD GND P The shield GND.

12 IO6/Hal_Duplex I/O Digital I/O or it is a half duplex control of the RS-485

13 ISP/SETUP I

Active low, will cause System enter into ISP mode while

power plugged in and low this pin. Or Enter into Restored

factory default parameter mode

14 IO5/RS485 I/O Digital I/O, or it is a RS-485 or RS-422 function selector.

15 /RST I Reset Pin

16 IO0 I/O Digital I/O

17 IO1 I/O Digital I/O

18 IO2 I/O Digital I/O

19 RXD I UARTRx data in.

20 TXD O UARTTx data in

21 RTS O RS232 /RTS

22 CTS I RS232 /CTS

23 IO3 I/O Digital I/O

24 IO4 I/O Digital I/O

Inhaltsverzeichnis

Andere Infosystem Technology Corporation Steuereinheit Handbücher

Infosystem Technology Corporation

Infosystem Technology Corporation WM-110 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung