Ingenic USBCloner Bedienungsanleitung

Ingenic®

USBCloner The Burn tool Quick Guide

Date: July. 2017

Ingenic®

USBCloner The Burn tool Quick Guide

Disclaimer

This documentation is provided for use with Ingenic products. No license to Ingenic property rights is

granted. Ingenic assumes no liability, provides no warranty either expressed or implied relating to the

usage, or intellectual property right infringement except as provided for by Ingenic Terms and

Conditions of Sale.

Ingenic products are not designed for and should not be used in any medical or life sustaining or

supporting equipment.

All information in this document should be treated as preliminary. Ingenic may make changes to this

document without notice. Anyone relying on this documentation should contact Ingenic for the current

documentation and errata.

Ingenic Semiconductor Co., Ltd.

Ingenic Headquarters, East Bldg. 14, Courtyard #10,

XIbeiwang East Road, Haidian District, Beijing 100193, China,

Tel: 86-10-56345000

Fax: 86-10-56345001

Http: //www.ingenic.com

Contents

USBCloner The Burn tool Quick Guide

Contents

1 Overview.............................................................................................................1

1.1 Operating environment support..............................................................................................................1

1.2 The composition of burn tool................................................................................................................. 1

1.3 The burn tool package............................................................................................................................ 1

2 Install the driver.................................................................................................. 2

Run the Burn tool .............................................................................................7

2.1 Ubuntu.................................................................................................................................................... 7

2.2 Windows................................................................................................................................................. 7

3 Burn process........................................................................................................9

3.1 Choose the platform, board configuration............................................................................................. 9

3.2 Modify the policy................................................................................................................................. 10

3.3 Save current configurations..................................................................................................................10

3.4 Add configurations............................................................................................................................... 12

4 Burn sample...................................................................................................... 13

4.1 Choose the platform, board configuration........................................................................................... 13

4.2 Modify the policy................................................................................................................................. 13

4.3 Save current configurations..................................................................................................................15

4.4 Burn...................................................................................................................................................... 16

5 FAQ...................................................................................................................18

5.1 Windows driver installation failures.................................................................................................... 18

5.2 Progress is shown on the main interface to 0% (under Windows)for failure......................................18

5.3 Progress appears as failed Boot stage 10%..........................................................................................18

5.4 Progress appears as failed Boot stage 20%..........................................................................................18

5.5 Progress appears as failed Boot stage 40%..........................................................................................18

5.6 Progress appears as failed Boot stage 50%, 70%, 75%....................................................................... 19

5.7 Progress appears as failed Boot stage 85%..........................................................................................19

5.8 Progress appears as failed Boot stage 100%，But burning files by 0%............................................. 19

5.9 Other errors...........................................................................................................................................19

USBCloner The Burn tool Quick Guide

1 Overview

USBCloner burn tool is based on a new code framework developed. This document describes the

burning process of USBCloner burn tool that to avoid unnecessary use of questions.

1.1 Operating environment support

USBCloner supportted the systems as follows:

1）Windows XP、Win7 and above version（32bit,64bit);

2）Ubuntu12.04 and above version（32bit，64bit);

1.2 The composition of burn tool

Burn tool consists of two parts:

1）cloner.exe : the burn tool user interface (The program can be run directly by the user ).

2）core.exe : the core of the burn tool.

1.3 The burn tool package

There are two versions for different platform :

1）cloner-x.x.x(version number)-windows_release.zip

2）cloner-x.x.x(version number)-ubuntu_release.tar.gz

USBCloner The Burn tool Quick Guide

2 Install the driver

USBCloner has Linux and Windows version. on Linux, USBCloner do not need to install the driver.

Therefore, this section was for Windows XP, for example, this paper introduces Windows host driver

installation steps. USBCloner driver need’t Microsoft signature certification.

Note: when you install the drive under Windows, be sure to follow the documentation instructions

to install it. When you install the drive under Windows 8, you first need to configure the system to

disable the driver mandatory signature". Specific steps can be found on the Internet

Press the boot key and press the reset key to push the board into the burning mode. When the

board is connected to the PC, it automatically searches for drive installation and indicates

that the drive installation failed。

Right click on “my computer” to "manage",and you can find devices that have not

successfully installed USB drivers under other devices in the device manager ，As shown in

figure2-1。

USBCloner The Burn tool Quick Guide



Figure 2-1 identification devices

Right click on the current USB device and select update driver software to pop up, as shown in

Figure 2-2

USBCloner The Burn tool Quick Guide

Figure 2-2 select Manual lookup

Select "browse the computer to find driver software", pop up like figure 2-3, click browse, and

then select the drive directory cloner-win32-driver in the downloaded burn tool unpack

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung