Ingersoll-Rand ARO 67442 Bedienungsanleitung
OPERATOR’S MANUAL 67442
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 4-13-10
REVISED: 9-25-20
(REV: C)
SELF-RELIEVING BALL VALVE REGULATOR
THIS ACCESSORY IS USED WITH THE FOLLOWING AIR MOTORS
AF04XX-01, AF06XX-01, AF08XX-01, AF10XX-01 and AF12XX-01
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
INGERSOLL RAND COMPANY INC
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX (800) 892-6276 © 2020 CCN 15335425
arozone.com
GENERAL DESCRIPTION
ARO regulators provide controlled, consistent air pressure
required for the operation of a pneumatic actuated motor and
any coupled system. The integrated ball valve enables the op-
erator to easily throttle the motor/system from an o position
to the preset desired regulator pressure. In turn the operator
can also throttle from a full run position to an off condition
and control the positioning of the motor/system. The ball
valve also enables the operator to safely depressurize the mo-
tor/system without disconnecting the supply air line
.
REGULATOR DATA
Model. ........................67442
Air Inlet Port ................. 1/2 - 14 NPT
Maximum Air Inlet Pressure .... Refer to Air Inlet PMAX
found on model plate of pump/ air motor
Operating Temprature Range. . .
23F to 175F (-5 C to 79C)
Maximum Air Flow.............
215 SCFM (101 dm3/s)
Figure 1
Page 2 of 4 67442 (en)
CAUTION
High pressure equipment – Always
disconnect air supply and relieve material pressure
before attempting to service.
Ball Valve
1. Move the (8) control handle counterclockwise to pres-
surize the system. A 90 degree movement would be the
“o” position. A 90 – 180 degree movement would allow
the system to be throttled to full regulated line pressure
(180 degree counterclockwise position being the “on”
position) .
2. Move the (8) control handle clockwise to either stop
the system or to de-pressurize the system. A 90 degree
movement would return to the “off” position. A 90 –
180 degree movement would allow the system to be
de-pressurized and vent the residual system pressure
through the (6) vent nut and dump to atmosphere (180
degree clockwise position being “vent” position).
OPERATING AND SAFETY PRECAUTIONS
INSTALLATION
1. Install the 67442 self- relieving ball valve regulator us-
ing the three (11) bolts passing through the (1) regulator
housing. Be certain that the (26) O-ring is in the recess
groove on the mounting side of the (1) regulator hous-
ing to establish the pneumatic seal. Tighten all (11) bolts
evenly to 50-60 in-lbs (13.6-20.3 Nm)
.
2. The (39) adjustment knob should be turned counter-
clockwise until compression is released from the pressure
control spring. This prevents over pressurizing the air op-
erated equipment when the air supply is turned on .
3. The (8) ball valve control handle should be turned clock-
wise until it stops. This will be in the de-pressurize / vent
position of the control handle. The (8) handle position is
adjustabe to eight dierent locations and can be adjust-
ed by removing the (10) button head screw, (9) washer,
and (8) control handle and oriented as desired. The (7)
key should not be removed. The (7) key establishes the
on/ o /vent orientation of the ball valve.
4. Connect piping to Air inlet port using pipe thread seal-
ant on male threads only. Do not allow sealant to enter
interior of regulator.
5. Air line piping should be the same size as regulator
ports.
OPERATION
Regulator
1. Pull (39) knob to adjust air pressure.
2. Turn clockwise to increase air pressure.
3. Turn counterclockwise to decrease air pressure.
4. Push (39) knob to lock.
PARTS AND MAINTENANCE
When the life of the product has expired, it is recommended
that the product be disassembled, degreased and parts
separated by material so that they can be recycled.
The original language of this manual is English.
Refer all communications to the nearest Ingersoll Rand
Oce or Distributor.
67442 (en) Page 3 of 4
Item Description (size) Qty Part No. Mtl
1 Housing (1) 96919 [A]
2 Seat O-Ring (3/32” X 1 1/4” OD) (2) Y325-121 [B]
3Seat (2) 96925 [D]
4 Ball (1) 96926 [SS]
5 Vent Nut O-Ring (1/16” X 1-5/16” OD) (1) Y325-25 [B]
6 Vent Nut (1) 96924 [Br]
7Key (1) 96921 [S]
8 Handle (1) 96920 [A]
9 Washer (1) Y13-4-C [S]
10 Button Head Screw (1/4”-20 X 3/8”) (1) Y211-142 [S]
11 Socket Head Screw (5/16”-18 X 3-1/4”) (3) Y99-511 [S]
12 Cover Ring (1) ----- [Ny]
13 Gauge Cover (1) ----- [PC]
14 Screw (2) ----- [S]
15 Gauge Assembly (0 - 140 psig) (1) 104334 [Ny/S]
16 Gauge O-Ring (1) ----- [B]
17 Valve (1) ----- [Ny]
18 Valve O-Ring (1) ----- [B]
19 Valve Spring (1) ----- [SS]
20 Valve Guide O-Ring (1) ----- [B]
PARTS LIST / 67442
Item Description (size) Qty Part No. Mtl
21 Valve Guide (1) ----- [Ny]
22 Pipe Plug (1/4”-18 NPT) (1) Y17-51-S [S]
23 Valve Stem Washer (1) 96923 [D]
24 Valve Stem O-Ring (1) Y325-110 [B]
25 Valve Stem (1) 96922 [Br]
26 Outlet Port O-Ring (3/32” X 1-1/4” OD) (1) Y325-121 [B]
27 Stem O-Ring (1) ----- [B]
28 Stem (1) ----- [Ny]
29 Static Pressure Tube (1) ----- [D]
30 Relief Valve Seat (1) ----- [B]
31 Relief Valve (1) ----- [Ny]
32 Diaphragm (1) ----- [Ny/B]
33 Diaphragm Washer (1) ----- [Ny]
34 Diaphragm Retaining Washer (1) ----- [D]
35 Spring (5-125 psig) (1) 104331 [S]
36 Adjustment Nut (1) ----- [S]
37 Adjustment Bolt (1) ----- [S]
38 Bonnet (1) ----- [Ny]
39 Knob (1) ----- [D]
MATERIAL CODE
[A] = Aluminium
[B] = Nitrile
[Br] = Brass
[D] = Acetal
[Ny] = Nylon
[PC] = Polycarbonate
[S] = Steel
[SS] = Stainless Steel
Page 4 of 4 67442 (en)
PN 97999 - 1529
PARTS LIST / 67442
6
5
2
3
1
29
30
31
32
35
36
39
38
37
33
22
17
19
21
12 13 14
11 10
4
987
15 16
20
18
23
24
27
28
25
26
34
Figure 2
Andere Ingersoll-Rand Controller Handbücher
Ingersoll-Rand
Ingersoll-Rand Insight IC Series Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand ARO 651763-AM-2 Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand 150BMG Series Einrichtungshandbuch
Ingersoll-Rand
Ingersoll-Rand SS815 Series Einrichtungshandbuch
Ingersoll-Rand
Ingersoll-Rand INSIGHTqcx Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand ST1000 Series Einrichtungshandbuch
Ingersoll-Rand
Ingersoll-Rand EC24N Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand ARO 2752 Series Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand ECM24N Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand EC34ES-1 Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand X8I Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand ESCB10 Handbuch
Ingersoll-Rand
Ingersoll-Rand ST400 Series Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand ARO 6744 Series Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand X8I Bedienungs- und Wartungshandbuch
Ingersoll-Rand
Ingersoll-Rand 651785 Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand X4I Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand Xe-50 Bedienungsanleitung
Ingersoll-Rand
Ingersoll-Rand ST400 Series Einrichtungshandbuch
Ingersoll-Rand
Ingersoll-Rand ST600-13-31 Einrichtungshandbuch
