Ingrasys iPoMan 8000 Bedienungsanleitung
iPoMan 8000
User Manual
iiiiPoMan 8000
Preface
About this manual
Congratulations on purchasing the iPoMan 8000. This user manual provides
detailed descriptions of the hardware components and how to use it. Read
this manual carefully and follow the instructions while using the
iPoMan 8000.
Copyright information
No part of this manual, including the products and software described in it,
may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language in any form or by any means, except documen-
tation kept by the purchaser for backup purposes, without the express writ-
ten permission of the manufacturer.
Products and corporate names appearing in this manual may or may not be
registered trademarks or copyrights of their respective companies, and are
used only for identification or explanation and to the owners’ benefit, with-
out intent to infringe. All trademarks are the property of their respective
owners.
Copyright © 2005. All rights reserved.
Warranty policy
TBA
iv iPoMan 8000
Safety instructions
Follow these safety instructions to avoid injury to self and damage to the
iPoMan 8000.
• To reduce the risk of fire or electric shock, install the unit in a tempera-
ture-controlled indoor area free of conductive contaminants. Do not
place the unit near liquids or in an excessively humid environment.
• Do not allow liquids or foreign objects to enter the unit.
• The unit does not contain any user-serviceable parts. Do not open the
unit.
• Servicing, maintenance, and repair for this equipment must be per-
formed by qualified service personnel. Remove rings, watches and
other jewelry before servicing the unit.
• Before maintenance, repair or shipment, the unit must be completely
switched off and unplugged and all connections must be removed.
• Before plugging in the power cord of the device, make sure that the
power source rating matches the power rating of the iPoMan 8000.
• Use a standard power cord when you connect any device to the outlets
of iPoMan 8000.
• This unit has been provided with a real time clock circuit. There is a
danger of explosion if the battery is incorrectly replaced. Replace only
with a 3V Lithium cell (CR2032) or equivalent type. Discard used bat-
teries according to the manufacturer’s instructions.
viPoMan 8000
Table of Contents
Introducing the iPoMan 8000
Features ................................................................................. 2
Package contents ................................................................... 3
Hardware components........................................................... 4
Front panel ..................................................................... 4
Status indicators ...................................................... 6
Using the control buttons ........................................ 7
Rear panel....................................................................... 9
Getting started
Attaching the feet ................................................................ 10
Attaching the ears................................................................ 10
Making connections ............................................................ 11
Connecting input power ............................................... 12
Connecting output devices ........................................... 13
Connecting digital outputs ........................................... 13
Connecting EMD ......................................................... 14
Connecting the console ................................................ 15
Connecting to a WAN.................................................. 15
Using the console menu
Using HyperTerminal.......................................................... 16
Navigating through the console menu................................. 18
Setting the IP address .......................................................... 20
vi iPoMan 8000
Using the web interface
Overview ............................................................................. 21
Modifying the basic settings ............................................... 22
Setting the date and time .............................................. 22
Adding users................................................................. 23
Changing event alert settings ....................................... 23
Modifying application settings............................................ 24
Setting control options ................................................. 24
Setting up a schedule.................................................... 25
Status ............................................................................ 25
Configuration ............................................................... 25
Appendix
Specifications ...................................................................... 26
Error codes .......................................................................... 27
Regulatory information ....................................................... 28
FCC Statement ............................................................. 28
CE................................................................................. 29
UL ................................................................................ 29
1iPoMan 8000
Introducing the iPoMan 8000
Congratulations on purchasing the iPoMan 8000, an intelligent power man-
agement system. The iPoMan 8000 provides the useful ability of managing
power for any combination of network equipment connected to it. You can
control the power on/off for any device connected to the iPoMan 8000,
manually or remotely, using a console or Ethernet connection. The
iPoMan 8000 comes with eight power outlets, each of which, can be moni-
tored and controlled through the console or web interfaces. You can also use
the front panel to operate the power outlets.
The iPoMan 8000 is also equipped with a console port for connecting an
EMD (Environmental Monitored Device) for sensing temperature and
humidity along with two alarms that can be activated when either of the sen-
sors show unusual values. The iPoMan 8000 is provided with two digital
outputs which you can use for connecting status indicators or digital
switches.
The device is designed to remember the configuration of each outlet and
inlet and is also able to measure the input and output current consumption.
Introducing the iPoMan 8000
2iPoMan8000
Features
• Eight power outlets that can be turned on or off in multiple ways, with
easy monitoring of current consumption
• Versatile sensors supported through EMD (Environmental Monitoring
Device) inputs
• Active extended devices via digital outputs
• Monitor and manage connected devices and sensors remotely
• Control the iPoMan 8000 manually, or remotely through console or
network
• Intelligent turn on/off devices based on event occurrence or planned
schedule
• Comprehensive power management and flexible configuration through
web browser, NMS, Telnet, SNMP, or HyperTerminal (console)
• Configurable user security control
• User-friendly interface to display input and output status
• Detailed data-logging for statistical analysis and diagnostics
• Upgrade utility for easy firmware upgrade
• Event notification through SNMP trap or Email alerts
• Daily history report through Email
• Supports SSL V3 and SSH V1 protocol
• Administrator and multiple users with password protection for dou-
ble-layer security
• Address-specific IP security masks to prevent unauthorized access
• Available in 110V and 220V models
Introducing the iPoMan 8000
3iPoMan 8000
Package contents
Make sure that your package has the following items. If any of items is
missing or damaged, contact your nearest service center or vendor.
1. iPoMan 8000
2. Ears (x2)
3. U-type handle (x2)
4. U-type handle screws (x4)
5. Ear screws (x6)
6. Feet screws (x4)
7. Software CD
8. Feet (x4)
9. User manual
10. Power cord
11. Serial cable
Introducing the iPoMan 8000
4iPoMan8000
Hardware components
Take a moment to familiarize yourself with the iPoMan 8000 front and rear
panels. The following sections provide descriptions about the front and rear
panel components and how to use them.
Front panel
Component Description
1. Output power status
indicator (A ~ H)
Displays output current, power status, and
remote control status for each power outlet A
through H.
2. Input power consump-
tion indicator
Displays percentage of input power
consumed.
3. Status indicator Displays input current, voltage, frequency,
and error code.
4. Remote control button Enables you to manually control power and
enable remote control configuration for each
power outlet A through H.
5. Reset button Enables you to reset the iPoMan 8000 in case
the system locks up.
Inhaltsverzeichnis
Andere Ingrasys Stromverteilungseinheit Handbücher
