Initio INIC 1430 Bedienungsanleitung
INIC
-1430
ATA/ATAPI IDE TO 1394
BRIDGE CONTROLLER SOLUTION
FEATURES
Provides an ideal interconnect
for multimedia applications
Allows the development of true
plug-and- play solutions
Supports UDMA 100 for high
speed data transfers
deal for 1394 RA D
configurations
ntegrated microprocessor
Applications that benefit from
IEEE 1394 include nonlinear
(digital) video presentation and
editing, des top and commercial
publishing, document imaging,
home multimedia, and personal
computing. The low overhead, high
data rates of 1394, the ability to
mix real-time and asynchronous
data on a single connection, and
the ability to mix low speed and
high speed devices on the same
networ provides a truly universal
connection for almost any
consumer, computer, or peripheral
application.
The Initio INIC-1430 is a third generation UDMA 100 ATA-to-1394a bridge controller
that provides a sol tion to connect ATAPI or ATA devices to IEEE-1394a-2000 interfaces.
It is designed to accelerate the time-to-market for 1394 capable peripheral devices
by integrating an already proven 1394a-2000 core and microprocessor with the
necessary IDE interface into a single ASIC. The SBP-2 (Serial B s Protocol) compliant
firmware is stored in an external ROM (Flash). S pporting data transfers of p to 400
Mb/sec., the INIC-1430 IDE interface s pports Ultra DMA (100/66/33) modes making
it feasible to be sed in many 1394 applications.
The INIC-1430, in conj nction with an external PHY provides a cost effective sol tion
to attach ATA/ATAPI devices s ch as HDD's and CD/DVD devices to the 1394 b s. The
firmware extracts ATA, MMC-2/3 and RBC command sets from the SBP-2 transport
layer and passes them to the ATA devices. The m ltiple transmit and receive FIFOs
of the DMA channels allow the INIC-1430 to handle transfers of asynchrono s data .
Expandable, easy-to- se and cost-effective, the INIC-1430 gives c stomers the ability
to meet the challenges of developing markets in new and exciting ways.
INIC-1430
FEATURES:
Performs 1394a-2000 Cycle Master
S pports Asynchrono s Transfers at 100, 200 and 400 Mb/sec
Ultra DMA modes 2, 4, 5 (100/66/33), DMA mode 0-2
S pport SBP-2 and ATA/ATAPI, RBC & MMC-2/3 command sets
S pports Ind stry Standard PHY
Integrated microprocessor with embedded SRAM
Separate command in, Command o t and Page table b ffers for optim m performance
128-pin LQFP package
1394-1995, and 1394a-2000 compliant
FIRMWARE SUPPORT:
The INIC-1430 firmware will s pport many device protocols incl ding MMC-2/3, RBC, ATA/ATAPI.
To expedite time-to-market and facilitate firmware development an eval-kit will be provided to
q alified c stomers. The kit incl des an INIC-1430 test board and the appropriate firmware
development environment.
DEVICE SUPPORT:
INIC-1430 s pports peak data transfer rates of 400 Mb/sec which is s fficient for effective
integration of a n mber of peripheral devices targeted for se in a professional desktop comp ting
environment. The c rrent architect re satisfies the bandwidth and Pl g n Play req irements for
seamless integration of devices s ch as:
Hard disk drives CD-RW devices DVDs Removable Media
IEEE 1394, the A/V Digit l
Interf ce of Choice
The outstanding growth
potentia of IEEE1394 is a
product of the standards
high performance and
seam ess compatibi ity.
Copyright©2001 by nitio Corporation. All rights reserved. The N C- prefix is a trademark of nitio Corporation. All other product names that appear in this material are for identification purposes only
and are acknowledged to be trademarks or registered trademarks of their respective companies. nformation supplied by nitio is believed to be accurate and reliable, but nitio assumes no responsibility
for any errors that may appear in this material. nitio Corporation reserves the right, without notice, to make changes in product design or specification. Printed in U.S.A. 11/01 P/C: D162-01
Initio Corporation
2205 Fort ne Drive, S ite A
San Jose, CA 95131-1806
Tel: 408.577.1919
Fax: 408.577.0640
Toll Free: 1.800.994.6484
Email: [email protected]
http://www.initio.com
INIC
-1430
ATA/ATAPI IDE TO 1394
BRIDGE CONTROLLER SOLUTION
Come Together.
Using 1394 a ows
up to 63 devices
to be inked
together without
many of the ru es
and imitations of
competing
techno ogies.
Customized to your
ex ct specific tions.
By working c ose y with
our customers, we can
provide the right design
so ution for each
particu ar need.
ReWritable
ReWritable
i.LINK
Dieses Handbuch passt für folgende Modelle
1
Andere Initio Controller Handbücher
