Ink Bird ITC-308-WIFI Bedienungsanleitung
ITC-308-WIFI
Smart Controller
Manual
1
1
2
3
5
11
19
20
01 CAUTION
02 Specification
03 Technical
Parameters
05 Inkbird Smart
APP Setting
04 Get to Know
the Device
06 Control Function
Instructions
07 Exception
Handling
08 Technical
Assistance and Warranty
01 CAUTION
02 Specification
●KEEP CHILDREN AWAY.
●TO REDUCE THE RISK OF EL ECTRIC
SHOCK, USE ONLY INDOORS.
● RISK OF ELECTRIC SHOCK, DO NOT
PLUG INTO ANOTHER RELOCATABLE
POWER TAPS OR AN EXTENSION CORD.
● USE ONLY IN DRY LOCATION.
●USING TGE LNKBIRD CONTROLLERWITHIN
10A,110V OR 230V.
●NORMALLY, LIFE OF THE RELAY IS 100,000
TIMES. IF HEATING OR COOLING SWITCHES
FREQUENTLY WHEN USING, SERVICE LIFE
GET SHORTER. PLEASE REPLACE THE OLD
CONTROLLER WITH A NEW ONE ACCORDING
TO SPECIFIC USING CONDITION, JUST IN
CASE OF LOSS OR DAMAGE CAUSED BY THE
DAMAGED RELAY.
●Plug-n-play, easy to use.
1
03 Technical
Parameters
●Power: Voltage: 100~230Vac
50/60Hz, Current: 10A, Max Wattage:
1200W(110Vac), 2200W(220Vac)
●Type of temperature probe: R25°C
=100KΩ±1%, R0°C=26.74~27.83KΩ,
B25/85°C=3435K±1%
● Temperature measurement range:
-40°C~100°C/-40°F~212°F
● Temperature display accuracy: 0.1
● Dual relay output, which can connect
heating and cooling device at the same time.
● Support reading in Celsius or Fahrenheit.
● Dual screen display, can display test
temperature and setting temperature
simultaneously.
●Temperature calibration function.
●Delay protection for cooling.
●High and low temperature limit alarm can
be set up.
●Probe abnormal alarm.
●WIFI Smart APP.
2
-40℃≤T<10°C ±2°C -40°F ≤T<50°F ±3°F
10℃≤T<80°C ±1°C 50°F ≤T<176°F ±2°F
80℃≤T≤100°C ±2°C 176°F ≤T≤212°F ±3°F
Range of
Temperature(T)Celsius
Celsius
Error
Range of
Temperature(T)Fahrenheit
Fahrenheit
Error
°C /°F(<100°C/℉), 1°C/°F(>=100°C/°F)
● Temperature measurement accuracy:
● Display unit: Celsius °C or Fahrenheit °F
● Ambient temperature: -20°C~60°C/
-4°F~140°F
● Storage environment: temperature:
0°C~60°C/32°F~140°F; humidity:
20~80%RH(Unfrozen or condensastate )
●Warranty:
Contoller:2 years warranty
Temperature Probe:1 year warranty
3
04 Get to Know
the Device
4
2
1
3
4
5
PV: In normal mode, it displays current
temperature; in settings mode, it displays
menu code.
SV: In normal mode, it displays the
temperature setting value; in the setting
mode, it displays the setting value.
Red Light ON: Heating output is on.
Green Light ON: Cooling output is on.
Green Light Blinks: The controller is
performing the function of compressor
delay.
1
2
3
8
4
5
US S ock e ts
E U S ocke ts
UK S o ck ets
A U S o ckets
WIFI
6
7
6
7
6
7
6
7
HEATING: Heating output socket.
COOLING: Cooling output socket.
Setting button(SET)，Increase
button ( )，Decrease button( ): More
details on Control Function Instructions.
05 Inkbird Smart
APP Setting
5.1 Download the APP
Search the keyword “InkbirdSmart” in
Appstore or Google Play, or scan the
following QR code to download and
install the APP.
5.2 Pair with your phone
Open the app, it will ask you to register or
log in your account on the APP. Select the
country and enter your Mobile number or
Email to finish the registration. Then press
1
InkbirdSmart
5
WIFI
6
7
8
“Add Home”button to create your home.
Tap “+” or “add device” button in home
page of the APP to add the device.
If the controller is in the normal
working state, you can long press 2
seconds to reset the WIFI. It will enter
the Smartconfig configuration state
by default. You can short press to
switch the Smartconfig configuration
state and the AP mode. If you change
the WIFI state, it will take about 5
seconds to display the corresponding
LED symbol and state, because of
the WIFI module data processing.
3
6
2
WIFI
WIFI
Add device in quick connection:
●Plug the device in the socket and
make sure that the device is in the
Smartconfig.
●configuration state (the LED symbol
is flashing, interval flashing 250ms).
Click “Confirm indicator rapidly blink”
and then select Wi-Fi network, enter
Wi-Fi password,click “confirm” to
enter connection process.
●The device only supports 2.4GHz Wi-Fi
router.
7
8
Add device in AP mode:
●Plug the device in the socket and
make sure that the device is in the AP
Configuration State (the LED symbol
is flashing slowly, interval flashing
1500ms).
●Click “ ” to enter device adding
interface,click “Confirm indicator
slowly blink” and then select Wi-Fi
network, enter Wi-Fi password,click
“confirm” to enter connection process.
●Press “Connect now” and it will go to
your WLAN Setting in your smart
phone, select the “SmartLife-XXXX”
to directly connect to the router without
putting in password.
● Go back to app to enter into the automatic
connection interface.
WIFI
Inhaltsverzeichnis
Andere Ink Bird Controller Handbücher
Ink Bird
Ink Bird IIC-800-WIFI Bedienungsanleitung
Ink Bird
Ink Bird Hioazo HO-SC-6W Bedienungsanleitung
Ink Bird
Ink Bird IHC-200-WIFI Bedienungsanleitung
Ink Bird
Ink Bird C909 Bedienungsanleitung
Ink Bird
Ink Bird ITC-100 Bedienungsanleitung
Ink Bird
Ink Bird IHC-200 Bedienungsanleitung
Ink Bird
Ink Bird Hiazo HO-SC-8W Bedienungsanleitung
Ink Bird
Ink Bird ITC-100 Bedienungsanleitung
Ink Bird
Ink Bird IIC-600-WIFI Bedienungsanleitung
Ink Bird
Ink Bird ITC-100 Bedienungsanleitung
