Ink Bird Plus HT2004-15D Bedienungsanleitung

USER MANUAL

SPACE HEATER

Basic

· Model No: HT2004-15D

· Item No: IHT-01

· Heat Settings: 1000W (low) / 1500W (high)

· Rating: US 120V, 60Hz (EU 220-240V, 50/60Hz)

· Timer Setting Range: 0~24 Hours

· Product Warranty: 1 Year

· Positioning of the Heater

The heater should only be operated at a minimum

distance of 1 metre from any wall or other object.

Position the air ow in order to optimize the heating

of the room.

Specications

: Timer Setting

: Oscillation Mode

: Natural Wind

: Power ON/OFF

: Low Heat : High Heat

: ECO Mode

Operation Instructions

· Turn ON/OFF the Heater

① Place the heater on a level surface in a stable upright

position.

② Connect the heater to the power source, then press

the button to turn on the heater. The indicator light

will automatically light up.

Note: Ensure the voltage on the specication plate is

the same as in your home and the power cord is lying

safely on the ground.

· ECO Mode

① After activating the appliance, it enters ECO mode

by default.

② In the working state, press the ECO button to enter

the setting of ECO mode, then press the “-” or “+”

button to set a target temperature within the range of

41°F to 97°F (5°C to 36°C). After that, press the ECO

button again to save and quit the setting.

③ ECO mode will automatically control the heating on

or off according to the set temperature.

· Manual Mode

During operation, press the or button to enter

manual mode and simultaneously activate the

associated low/high heat power to blow.

= Low Heat (1000W); = High Heat (1500W)

· Timer Function

① The timer function can be set at any time and can

work in both ECO mode and manual mode.

② In the working state, press the button to enter

the timer setting, and then press the “ + ” or “ - ”

button to set the timer within the range from 0 to

24 hours.

· Oscillation Function

In the working state, press the button to let the

heater start/stop oscillating.

· Natural Wind Function

In the working state, press the button to stop

heating and blow out the natural wind.

· Remote Control

The telecontroller duplicates all the controls on the

heater. Please refer to the above operation instructions.

You can use the controller to control the heater from a

range of 3 to 6 meters.

· Over-Heat Protection

① This heater has over-heat protection that switches it

off automatically if it overheats.

② Overheating can be caused by obstruction to the air

intake on the back of the heater or the grill on the front.

③ If overheating occurs, please disconnect the heater

· Safety Cut-Out Switch

The heater features a safety cut-out switch that will

switch off the heater if it is knocked over.

· Precautions For Use

· Use only the voltage specied on the rating label of

the appliance.

· Do not cover or restrict airow to the inlet or outlet

grilles in any manner as the appliance may overheat

and become a re risk.

· Do not cover grilles, block entry, or exits of airow by

placing the appliance against any surface. Keep all

objects at least 1 meter from the front, side, and rear

of the appliance.

· Do not operate in areas where gasoline, paint, or

other ammable liquids are used or stored.

· This appliance heats up when in use. To avoid burns,

from the power socket and allow it to cool for 30

minutes. Remove any obstruction before turning the

heater back on.

Notes:

① If the heater is knocked over and the cut-out switch

is activated, cut oﬀ the power and take extra care

when you stand the heater upright as it will still be hot.

② Inspect the heater for damage, especially to the

heating elements and supply cord.

③ If any damage is visible do not operate the heater.

do not touch the front of the appliance or any of the

grilles or vents.

· Before moving the appliance, switch off the appliance

by unplugging it from the wall and allowing it to cool.

· Do not use the appliance to dry clothes.

· Do not immerse in liquid or use the appliance near

water as this could create an electrical shock hazard.

· Do not operate any appliance with a damaged cord

or plug or after the appliance malfunctions or has been

dropped or damaged in any manner. Return to a

qualied electrical person for service or repair.

· Do not connect the appliance to the mains voltage

until completely assembled and adjusted.

· This appliance is not intended for outdoor use.

· Unroll the cord before operating. Operating with a

coiled cord may cause overheating and re risk.

· The use of an extension cord with this appliance is not

recommended.

· Do not remove the plug from the power socket until

the appliance has been switched off.

· Always hold the plug when removing it from the wall,

do not pull the cord.

· Always unplug the appliance when it is not in use.

· Do not allow the cord to come into contact with the

appliance surface during operation.

· Do not run the cord under carpeting, mats or rugs,

etc. Arrange the cord away from trafc areas so that it

will not be tripped over.

· Do not twist, kink, or wrap the cord around the

appliance as this may cause the insulation to weaken

and split.

· This appliance is not intended for use by young

children or inrm persons without supervision.

· This appliance is intended for light domestic use and

not for heavy-duty commercial or industrial use.

· The appliance must not be located immediately

below or in front of a socket- outlet.

· Do not use this appliance with any type of external

timer.

· Cleaning And Care

IMPORTANT: Turn off the heater. Switch off the power

switch and disconnect the heater from the power socket.

Wait for the heater to be completely cool before

cleaning.

① Vacuum clean air vents and grilles to remove dust

from these areas.

②To remove dust on external surfaces, wipe the heater

with a damp (not wet) lint-free cloth rinsed in hot soapy

water only.

③Do not use any harsh detergent or abrasive cleaners.

④Do not spray with liquids or submerge the heater in

water or other liquids.

⑤Do not attempt to clean the interior of the heater.

⑥Do not attempt to open the heater casing at any time.

⑦Store the heater carefully in a dust-free area during

the off-season. It is best to store the heater in the

included carton. Neatly wind the cord of the heater to

prevent damage.

· Product Warranty

This item carries a 1-year warranty against defects in

either components or workmanship. During this period,

products that prove to be defective will, at the

discretion of INKBIRD, be either repaired or replaced

without charge.

TANMET INT'L BUSINESS LTD 9 Pantygraigwen Road,

Pontypridd, Mid Glamorgan,CF37 2RR, UK

E-mail: tanmetbiz@outlook.com

Like Sun GmbH

Planckstr. 59, 45147 Essen, Nordrhein-Westfalen, Germany

Email: ec-connection@web.de

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung