1.3.3 BBQ
1. Select “BBQ” from the Main Menu, and click
to enter.
2. Rotate the knob to set a target temperature,
then click the knob to confirm the target
value, the controller will back to main
interface and display BBQ status.
3. The maximum fan power is limited to 70%
on smaller grills.
Please set the fan, the temperature alarm,
the temperature unit, the furnace size
manually according to the above operations.
3.2 Account Registration
Register before using the Inkbird Pro app.
Select your Country/Region, enter your
e-mail, a verification code will be sent to
your mailbox, enter it to confirm your
identity and the registration is done.
Note: If you have registered an account
before, just log in directly.
The device only supports 2.4GHz Wi-Fi
router.
3.3 Wi-Fi Connection
3.3.1 Connect to your phone
1. Plug in the Inkbird ISC-007BW smoker
controller, the smoker controller will turn on
automatically.
2. Open the app and click “+” to start the
connection, check if the Wi-Fi icon of the
smoker controller is blinking rapidly and
confirm on your app if it is, then enter your
Wi-Fi password to connect to a wireless
network, click OK to connect the device.
3. Connection succeed!
3.3.2 Connect the device in AP mode
If the device is not connected to your phone,
the Wi-Fi icon flashes rapidly by default.
Press and hold the button for seconds to
switch to AP mode, the Wi-Fi icon flashes
slowly in AP mode.
1. Plug in the Inkbird ISC-007BW smoker
controller, the smoker controller will turn on
automatically.
2. Open the app and click “+” to start the
connection, choose the ISC-007BW smoker
controller, check if the Wi-Fi icon is blinking
slowly and confirm on your app if it is, then
enter your Wi-Fi password to connect to
wireless network, click “OK” to connect the
device.
3. The app will redirect to your phone’s
WLAN setting interface, select the
“SmartLife-XXXX” Wi-Fi network to directly
connect to the router without typing in
6
password. Go back to the app and enter the
automatic connection interface to click
“Done”.
4. Connection succeed.
3.3.3 Wi-Fi Reset
Press and hold the “Wi-Fi” button for 5
seconds to reset the Wi-Fi, then repeat the
steps to connect with your phone.
3.4 Bluetooth Connection
1. Turn on the device.
2. Open the app and switch it to Bluetooth
mode.
3. Tap “+” to choose the model of the device,
then follow the guide to pair the device with
your phone.
Note: Please turn on GPS on your Android
phone as Google Play requires it to work
fully. Once the device is successfully paired
with your phone, you don’t need to pair it
again unless you change your phone.
