Ink Bird ITC-106 Bedienungsanleitung

PID Temperature Controller

ITC-106

User Manual

Version 1.0

Inkbird Tech. Co., Ltd.

without prior written permission.

Disclaimer

Inkbird has made every effort to ensure that the information contained in this document is accurate and

complete; however, the contents of this document are subject to revision without notice. Please contact

Inkbird to ensure you have the latest version of this document.

http://waterheatertimer.org/Add-another-thermostat-to-gas-or-electric-water-heater.html#PID

ITC-106 User Manual

Inkbird Tech. Co., Ltd. www.ink-bird.com

Contents

1. Safety Precautions ................................................................................................3

2. Specification ........................................................................................................4

3. Dimension and Installing .......................................................................................5

4. Wiring Diagram ....................................................................................................5

5. Panel Instruction ..................................................................................................6

6. Setting Parameters ...............................................................................................7

6.1 Sensor Type and Measuring Range......................................................................................7

6.2 Operation Guide ...............................................................................................................7

6.21 Boot screen display....................................................................................................7

6.22 Enter the settings menu ............................................................................................7

6.23 Sensor Input Type Setting:.........................................................................................8

6.24 Output Parameters Setting: ........................................................................................8

6.25 PID Parameters Setting:.............................................................................................8

6.26 Setup Flow Chart:......................................................................................................8

7. Technical Assistance and Warranty ....................................................................... 10

7.1 Technical Assistance ........................................................................................................ 10

7.2 Warranty.........................................................................................................................10

ITC-106 User Manual

Inkbird Tech. Co., Ltd. www.ink-bird.com

1. Safety Precautions

Ensure the product using within the specification.

Do not touch the terminals at least while power is being supplied. Doing so may

occasionally result in injury due to electric shock.

Do not allow pieces of metal, wire clippings, or fine metallic shaving or filings from

installation to enter the product. Doing so may occasionally result in electric shock,

fire, or malfunction.

Do not use the product where subject to flammable or explosive gas. Otherwise,

injury from explosion may occasionally occur.

Never disassemble, modify or repair the product or touch any of the internal parts.

Electric Shock, fire, or malfunction may occasionally occur.

If the output relays are used past their life expectancy, contact fusing or burning may

occasionally occur. Always consider the application conditions and use the output

relays within their rated load and electrical life expectancy. The life expectancy of

output relays varies considerably with the output load and switch conditions.

ITC-106 User Manual

Inkbird Tech. Co., Ltd. www.ink-bird.com

2. Specification

Supply Voltage

AC 100~240V 50/60Hz (model:ITC-106RH, ITC-106VH)

AC/DC 12~24V 50/60Hz (model:ITC-106RL, ITC-106VL)

DC 12~24V (model:ITC-106RL, ITC-106VL)

Operating Voltage

Range

85~110% of the rated voltage

Power Consumption

5VA（100~240VAC）

4VA（12~24VAC）

3W（12~24VDC）

Display Code

PV: displays in red high luminance LED with 9.9mm height of 4

digits

SV: displays in green high luminance LED with 8.00mm height

of 4 digits

Display Accuracy

±0.2%FS 0.1ºC/ ºF(＜1000ºC/ ºF)；1ºC/ ºF(≥1000ºC/ ºF)

Sampling Period

0.5 second

Temperature

Compensation

0~50 ºC /32~122ºF

Control Output

Relay Output: AC 250V 3A (resistive load)

Voltage Output (for driving SSR): 12VDC, 30mA DC

Maximum load: 600Ω

Electrical Life of Relay:100,000 times

Alarm Output

Relay Output: AC 250V 3A (resistive load)

Weight

About 140g

Working Temperature

-10~ 55 ºC / 14~ 131 ºF(No freeze or condensation)

Working Humidity

RH 35-85%

Storage Temperature

-25~65ºC / -13~ 149 ºF (No freeze or condensation)

Models and Specification

Model

Control Output

Supply Voltage

ITC-106RL

Relay Output

AC/DC 12~24V

ITC-106VL

SSR Output

AC/DC 12~24V

ITC-106RH

Relay Output

AC 100~240V

ITC-106VH

SSR Output

AC 100~240V

ITC-106 User Manual

Inkbird Tech. Co., Ltd. www.ink-bird.com

3. Dimension and Installing

Size Diagram (Unit: mm)

Shell Size Install Adapter Panel Cutout

Insert the temperature controller into the hole in the panel, put the adapter from the

back and push it to button and make it clasp for temporarily fastening. Be sure there

is no gap among the controller, panel and the adapter and then fasten the two screws

on the adapter with the torque of 0.29N to 0.39N.

Be sure the ambient temperature is within the stated working range in the manual,

especially when there are two or more temperature controllers installed.

4. Wiring Diagram

2 wires sensor 3 wires sensor Thermocouple Output Relay Output Voltage

Power Connection: #9 and #10 terminals are for power connecting, which its supply

voltage should be match the item model.

Platinum Resistance Sensor Connection:

Three wires sensor: connected the #3 terminal with the red wire, the other two bule

wires should be separately connected to the #4 and #5 terminals.

And the sensor with two wires (e.g. PT100) should be separately connected to

the #3 and #5 terminals, the #4 and #5 terminals must be connected with the wire.

Thermocouple Connection(e.g. K sensor): #3 terminal is connected to the

positive pole(Red) and the #4 terminal is connected to the negative pole(Blue).

ITC-106 User Manual

Inkbird Tech. Co., Ltd. www.ink-bird.com

5. Panel Instruction

①PV Displaying Screen: Displaying the measuring value or the setting parameters.

②SV Displaying Screen: Displaying the setting value or the set parameters readout.

③Working Indicator Light

OUT: Control Output Indicating

ALM: Alarm Output Indicating

RUN: Manual Operation Indicating

④UP Button: when setting the value, pressing the up button can be increase the value

that would be added rapidly by keeping press this button.

⑤DOWN Button: when setting the value, pressing the down button can be decrease the

value that would be reduced rapidly by keeping press this button.

⑥SHIFT Button: when setting the value or parameters,

A, pressing this button to switch to the required value position.

B, Pressing this button can be shift to the submenu from the main menu.

C, Pressing this button can be freely switch to another mode from manual or the

automatic operation.

⑦SET Button: Pressing this button can read the value of control output and the set

temperature. Hold and press this SET button for 3s or more can be enter into the

parameters settings mode.

ITC-106 User Manual

Inkbird Tech. Co., Ltd. www.ink-bird.com

6. Setting Parameters

6.1 Sensor Type and Measuring Range

Sensor Type

Input

Code

Measuring Range

Platinum

Resistor

Pt100

-200~600 (ºC )

-300~1100(ºF )

Cu50

-50~150 (ºC )

-100~300(ºF )

Thermocouple

-50~1300 (ºC )

-100~2300(ºF )

-50~1700 (ºC )

-100~3000(ºF )

Wre

0~2300 (ºC )

0~4000(ºF )

-200~400 (ºC )

-300~750(ºF )

0~1000 (ºC )

0~1800(ºF )

0~1000 (ºC )

0~1800(ºF )

0~1800 (ºC )

0~3200(ºF )

0~1000 (ºC )

0~1800(ºF )

Remarks:

The faulty input sensor is the "K" type.

If select the wrong input sensor, the measuring temperature will be incorrect and may

exceed the measuring range with displaying "orAL", control output off.

6.2 Operation Guide

6.21 Boot screen display

6.22 Enter the settings menu

Under measuring and controlling condition, press ▲/▼to set the temperature value, press

and hold the "SET" button for 2 seconds to enter into the parameters settings mode.

ITC-106 User Manual

Inkbird Tech. Co., Ltd. www.ink-bird.com

6.23 Sensor Input Type Setting:

Set the sensor input type as required(the faulty is the "K" type), the temperature need to

calibrated for there will be deviation due to the sensor and the operating environment.

6.24 Output Parameters Setting:

The recommended control mode for the first use is the PID control(default settings of PID

control), please select the self-tuning mode when the controlling temperature cannot reach

the desired value after it worked over time with the stable controlled temperature.

Under the self-tuning mode, the temperature will exceed the set value and activate the

alarm. The exceeding temperature value is related to the heating system but it will return

to normal after finished the self-tuning. If the temperature control requirement is

undemanding, please select the ON/OFF control mode which its range of temperature

controlling is depended on the dF(hysteresis). As below is the setting and the calculation:

The low temperature point=SV setting value-dF

The high temperature point=SV setting value+dF.

※dF(hysteresis) can be worked both on alarm setting and ON/OFF control mode.

6.25 PID Parameters Setting:

SSR control output: the control period(CtrL) can be set within 4 seconds(default 2

seconds);

Relay control output: The control period (CtrL) should be set to longer time(the normal is

18s) that would prolong the work life of the relay.

6.26 Setup Flow Chart:

(Please check next page)

ITC-106 User Manual

Inkbird Tech. Co., Ltd. www.ink-bird.com

ITC-106 User Manual

Inkbird Tech. Co., Ltd. www.ink-bird.com

7. Technical Assistance and Warranty

7.1 Technical Assistance

If you have any problems installing or using this thermostat, please carefully and

thoroughly review the instruction manual. If you require assistance, please write us to

cs@ink-bird.com. We will reply your emails in 24 hours from Monday through Saturday.

You can also visit our web site www.ink-bird.com to find the answers of the common

technical questions.

7.2 Warranty

INKBIRD TECH. C.L. warrants this thermostat for one years from the date of purchase

when operated under normal condition by the original purchaser (not transferable), against

defects caused by INKBIRD’s workmanship or materials. This warranty is limited to the

repair or replacement, at INKBIRD’s discretion, of all or part of the thermostat. The

original receipt is required for warranty purposes.

INKBIRD is not responsible for injury property damage or other consequential damages or

damages of third parties arising directly from an actual or alleged in mater of workmanship

of the product.

There are no representations, warranties, or conditions, express or implied, statutory or

otherwise, other than herein contained in the sale of goods act or any other statue.

Business Contact: [email protected]

Technical Support: cs@ink-bird.com

Business Hours: 09:00-18:00(GMT+8) from Monday to Friday

URL: www.ink-bird.com

Inhaltsverzeichnis

Andere Ink Bird Temperaturregler Handbücher

Ink Bird

Ink Bird ITC-1000 Bedienungsanleitung

Ink Bird

Ink Bird ITC-306T Bedienungsanleitung

Ink Bird

Ink Bird IHC-230 Bedienungsanleitung

Ink Bird

Ink Bird ITC-100 Bedienungsanleitung

Ink Bird

Ink Bird ITC-100 Bedienungsanleitung

Ink Bird

Ink Bird ITC-1000 Bedienungsanleitung

Ink Bird

Ink Bird ITC-306A Bedienungsanleitung

Ink Bird

Ink Bird ITC-308 Bedienungsanleitung

Ink Bird

Ink Bird ITC-1000F Bedienungsanleitung

Ink Bird

Ink Bird ITC-308 Bedienungsanleitung

Ink Bird

Ink Bird ITC-308 Bedienungsanleitung

Ink Bird

Ink Bird ITC-608T Bedienungsanleitung

Ink Bird

Ink Bird ISC-007BW Bedienungsanleitung

Beliebte Temperaturregler Handbücher anderer Marken

Swegon

Swegon LUNAd MB Bedienungsanleitung

Lucky Reptile

Lucky Reptile Thermo Control II Bedienungsanleitung

SENSORMETRIX

SENSORMETRIX Argon 100 Bedienungsanleitung

Fuji Electric

Fuji Electric PXE4 Bedienungsanleitung

Yuyao gongyi

Yuyao gongyi XMT-808 series Bedienungsanleitung

Selec

Selec TC544C Bedienungsanleitung

P.W. KEY

P.W. KEY rt-208gt Bedienungsanleitung

Future Design

Future Design FDC-9200 Bedienungsanleitung

BH Thermal

BH Thermal BriskONE Bedienungsanleitung

Omron

Omron E5EX-H Bedienungsanleitung

West Control Solutions

West Control Solutions KS 45 Kurzanleitung

MCS

MCS RITC-15B Bedienungsanleitung

SMC Networks

SMC Networks Thermo-con INR-244-639 Bedienungsanleitung

eltherm

eltherm Ex-TC It Series Bedienungsanleitung

Omron

Omron C200H-TV Series Bedienungsanleitung

industrie technik

industrie technik CA1 Bedienungsanleitung

KRAL

KRAL EET 32 Bedienungsanleitung

dixell

dixell XR420C Verdrahtungsschema