Inkcups Cobalt 3000 Bedienungsanleitung
Cobalt 3000 - Quick Start Guide
1.
2.
3.
4.
6.
7.
8.
U
ncrat
e
the unit and place it on a stable
work surface.
Do not plug the USB in yet.
Install the software from the CD provided.
Start with Lasercad
Then install the 64bit USB driver
Install Teamviwer 8 (we'll need that for remote
training and support.) Use only version 8.
Plug in the USB connections
*Only use the USB cord provided.
Longer USB cables may have trouble
communication problems.
Rev.B Call Inkcups Now for remote training once you have set up your laser 978-646-8980
5.
RX-4 Exhaust Unit (optional)
If you have purchased the RX-4 exhaust
unit, then plug the remote on plug into the
back of the laser system.
You must provide powered ventilation to
the laser of at least 110cfm. Either vent to
the outside or provide HEPA filtration if
venting inside.
* Failure to properly vent the laser
will void the warranty for any
damage resulting
.
D
ouble click on the software icon
located on the desktop. If you are now
logged in as someone else, you can find
the program here:
C:\LaserCAD\AWCPrograms\LaserCAD.exe
T
urn t
h
e
l
aser on us
i
n
g
t
h
e power sw
i
tc
h
l
ocated on the back of the unit
.
Import
y
our
g
raphic fil
e
L
aserCad work area
.
Settin
g
s for plate depth
.
Sendin
g
the file to the laser
.
Cobalt 3000
Quick Start Guide
Instructions about setting
up your laser for
first time use.
Please Call Inkcups Now
for help and remote training.
978.646.8980
inkcups.cominkcups.com
How to etch plates faster:
The laser will always go faster
etching one image at a time.
When two plates are etched at a
time, the dead scan space
between the plates will increase
the overall time needed by
roughly 20%.
When etching a long image such
as a string of type. You should
always etch long images from left
to right. When placed vertically, it
may take up to five times longer
to etch. It’s ok to place the plate
vertically into the laser.
3:59
etch time
1:18
etch time
Inhaltsverzeichnis
Andere Inkcups Drucker Handbücher
