Inlite SMART HUB-150 Bedienungsanleitung

SMART HUB-150

MANUAL

OUTDOOR LIGHTING

START SCREEN

THE START SCREEN OPENS WHEN YOU START UP THE IN-LITE APP.

Select “I’m new here:” if you don’t yet have an account and if the

transformer has not yet been installed.

Select “I already have an account” if the transformer has already been

installed and an account has already been created. Enter your email

address to ask for your personal settings code. Enter this code to load

settings saved earlier.

Choose; ”Use shared code:” if you want to load the transformer settings

shared by others. This code is available in the app settings. In settings

choose the required yard for which a share code must be created with

the “Share yard” button. This code can then be shared with another in-lite

app user.

I AM NEW HERE.

Under “I am new here” open the “Set your yard” screen. Give the yard a

name e.g. “Front yard” and press Next.

PRESS “NEXT”.

The app searches for a connection with the transformer. As soon as the

transformer has been found, the identification code appears. Check that

this is the correct transformer by pressing the “flash light switch” button.

This activates the blue reset button indicator light (the button on the

right-hand side of the transformer).

Press the transformer (number) button when the correct transformer has

been found to continue.

OUTDOOR LIGHTING

STARTSCHERM

GIVE THE TRANSFORMER A NAME (SEE POINTER ON THE

SCREEN) AND PRESS NEXT.

THEN THE SCREEN OPENS WITH THE LIGHT ZONES TO BE

SET. PRESS THE “NOT DESIGNATED” BUTTON TO SET THE

FIRST LIGHT ZONE.

Then the screen shown on the right opens and the

lighting connected for this light zone flashes a few

times.

Pressing the “Flash again ” button makes the lighting

connected for the light zone flash again. Then give the

light zone a recognizable name and choose a suitable

symbol for the light zone. Repeat these steps for the

two other light zones.

PRESS “DONE” IN THE NEXT SCREEN WHEN ALL ZONES

HAVE BEEN GIVEN A NAME. THESE THEN TURN GREEN.

OUTDOOR LIGHTING

STARTSCHERM

IF THERE ARE NO OTHER TRANSFORMERS TO SET, CONTINUE BY

PRESSING THE “NEXT” BUTTON.

If there are other transformers to be set. Repeat these steps.

AS THE LAST STEP FOR INSTALLING THE TRANSFORMER CREATE

AN ACCOUNT TO SAVE THE SETTINGS.

Enter an email address and press “Save”

THEN THE SCREEN WITH AN EXPLANATION OF THE APP OPENS.

PRESS THE “SKIP” BUTTON IF REQUIRED.

The various options are explained aer pressing the “Continue”

button.

The extra explanation is canceled by pressing “Skip”.

OUTDOOR LIGHTING

ROUTINES

AFTER THE INTRODUCTIONS THE APP SHOWS WHICH ZONES ARE SET

AND THE LIGHTING CAN BE SWITCHED ON AND/OR OFF USING THE APP.

The app switches all zones o at the same time with the slide button

above the word settings. You switch each light zone with the slide

buttons.

PRESS “ROUTINES” TO OPEN THE ROUTINES SCREEN.

In the routines screen routines can be added with which light zones can

be automatically switched on or o at certain times. It is also possible

to switch light zones on and o using a motion sensor. This can also be

added as a routine here.

Press “Set your first routine”.

ADD ROUTINE

Here you can set the following routines:

• Sunset automatic: The set zones automatically switch on at sunset

and go out at a set time.

• Sunrise automatic: Here the set zones automatically come on at a

set time and go out again at sunrise.

• Motion sensor: Connect a wireless SMART MOVE motion sensor to

one or more light zones.

• Sunset to be set: Switch the set zones on and o in a period

between 16:00 hours and 4:00 hours.

• Sunrise to be set: Switch the set zones on and o between 04:00

hours and 10:00 hours.

• Sunrise-sunset: Switch the set zones on at sunset and o at sunrise.

OUTDOOR LIGHTING

ROUTINE: SUNSET AUTOMATIC AND SUNRISE AUTOMATIC

Give the routine a name and set a start time or end time

with the slide button. Then select the light zones for which

this routine must apply and press the “Add” button.

ROUTINE MOTION SENSOR

Press the pair button for 10 seconds on the back of the

wireless SMART MOVE motion sensor. Release the button

to make the connection with the transformer.

When the SMART MOVE motion sensor has been found,

the following screen opens.

GIVE THE MOTION SENSOR A NAME AND SET THE TIME

AFTER WHICH THE LIGHTING MUST COME ON AFTER

MOTION DETECTION.

The minimum time is 1 minute and the maximum time is 60

minutes.

Select the zones that must light up when motion is

detected and press Ready.

Repeat these steps if a number of wireless SMART MOVE

motion sensors are installed.

ROUTINES

OUTDOOR LIGHTING

ROUTINE: SUNSET ADJUSTABLE AND SUNRISE

ADJUSTABLE

Give the routine a name and set a start time and end

time with the slide button. Then select the lines for which

this routine must apply and press the “Add” button.

ROUTINE: SUNRISE-SUNSET

Give the routine a name. Select the lines for which this

routine must apply and press the “Add” button.

ROUTINES

OUTDOOR LIGHTING

SETTINGS

This screen is used to manage the various in-lite app settings.

MY YARDS

Select a set yard to change the names of the yard,

transformer or light zone. Here a transformer or

motion sensor can also be added and/or a share

code generated for the parts of the yard with another

smartphone/tablet. If a number of yards are installed,

the app also shows the names of the other yards.

ADD NEW YARD

A new yard can be added with “Add new yard”. Under

Account, settings such as the linked email address can

be changed.

LOG OUT

Note: The settings are not lost when just logging out.

When you log in again (without resetting the SMART

HUB-150) your settings are loaded again. If the app is

started up aer a transformer reset, the start screen

opens and the app can be set again.

WARRANTY

This is where you can read the general warranty

conditions for the in-lite products.

CHANGE TRANSFORMER

The names of the light zones and the name of the

transformer can be changed in this screen.

Select “Transformer (name)” to change the names of the

set light zones. The name of the transformer can also be

changed.

Choose “New transformer” to add a new transformer.

Choose “Motion sensors” to add a new motion sensor.

Choose “Change name” to change the name of the

yard

Select “Share yard” to generate a share code and share

the yard with another user

OUTDOOR LIGHTING

SETTINGS

ADD TRANSFORMER

This screen shows the set transformer and allows you to

add a new transformer and/or motion sensor. The name

of the yard can also be changed and a share code can

be generated here.

Press “Find transformers”.

IF THE TRANSFORMER IS FOUND THE FOLLOWING

SCREEN OPENS.

Follow the instructions and give the light zones a name

to add them.

ADD SMART MOVE MOTION SENSOR

Press the “Add motion sensor” button to add a new

SMART MOVE motion sensor.

OUTDOOR LIGHTING

SHARE A YARD

The share code is used to share all settings with

another user. The other user must enter this code under

“Use share code” in the app’s start screen.

This share code is easy to send with various apps by

pressing “Share”.

The share code can also be used if a user adds a new

yard if he already has an account.

SETTINGS

ADD YARD

Manually set a new yard giving the new yard a name

and continuing with Next.

Or use a share code of a yard already installed earlier.

With use share code the new yard is automatically

added.

I ALREADY HAVE AN ACCOUNT

Enter the email address already used and press Next.

Aer entering the email address an email is sent with

an access code. Use the “open mail-app” button to

read the email.

Should the code not be accepted, ask for a new code

then press “Send again”.

If the right code is entered, the yard is automatically

installed on the app and a connection will be made

with the transformer(s).

Andere Handbücher für SMART HUB-150

Inhaltsverzeichnis

Andere Inlite Schalten Handbücher

Inlite

Inlite SMART HUB-150 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung