Innokin Technology Cool Fire IV Plus Bedienungsanleitung

USER MANUAL

Welcome to the Cool Fire IV Plus

Congratulations on your purchase of this Innokin Cool Fire IV Plus Advanced

Personal Vaporizer. For the best possible vaping experience please carefully

read, and follow this user manual.

The Cool Fire IV Plus is the newest in the line of internationally bestselling

Innokin Cool Fire vaporizers. The Cool Fire IV Plus is the rst Innokin device able

to utilize Fast 2Amp Charging and features a greater range of Variable Wattage &

Variable Voltage, advanced safety protections and ‘Vape while charging’

Technology.

The Cool Fire IV Plus has an upgraded 3300mAh battery capacity and is more

powerful with a variable wattage range of 6.0 – 70.0 Watts, adjustable in .5 watt

increments, and a variable voltage range of 2.0 – 7.5 volts, adjustable in .1 volt

increments.

The Cool Fire IV Plus has a ush 510 connection with a spring loaded gold-plated

positive pin and durable stainless steel threading. Operated via three durable

buttons and has a large high quality bright OLED screen the CoolFire IV Plus is easy

WARNING:

Please read this section carefully to ensure you receive maximum benets from

your Cool Fire IV Plus and enjoy vaping with it in the most safe and eective ways

possible.

1. This Advanced Personal Vaporizer may be used with e-liquids that

contain

nicotine. If questions or concerns regarding your e-liquid arise, please check

with your e-liquid provider. This product is only intended for use by adults of

legal smoking age (18+) and should not be used by children, women who are

pregnant or breastfeeding, or persons with or at risk of heart disease, high

blood pressure, diabetes or taking medicine for depression or asthma, or who

otherwise may be sensitive to nicotine. Nicotine is addictive and habit

forming, and can be toxic by inhalation, in contact with the skin or eyes, or if

swallowed. Ingestion of the non-vaporized concentrated e-liquid ingredients

Please check and verify that your Cool Fire IV Plus is an authentic Innokin Technolo-

product. To verify that this Cool Fire IV Plus is a real Innokin Technology device

please:

1) Find the label on the reverse of the packaging and scratch the silver stripe to

reveal your Cool Fire IV Plus Unique Authorization number.

2) Visit the Ocial Innokin Technology website at

http://www.innokin.com/verify-device-en

3) Enter the Unique Authentication number in the Authentication eld.

4) Verify your Cool Fire IV Plus is authentic.

Join our social media channels for the latest Innokin information and great

giveaways!

Innokin Facebook Page: https://www.facebook.com/Innokin.Technology

Innokin Instagram: https://www.instagram.com/innokintechnology

Innokin Subreddit: https://www.reddit.com/r/innokin

Innokin Twitter: https://www.twitter.com/innokintech

If you have any questions or suggestions please write to us at [email protected].

Have a great day and thank you for choosing Innokin!

2. This Advanced Personal Vaporizer may be used with e-liquids that contain

nicotine, a chemical known to the State of California to cause birth defects or

other reproductive harm. Please check with your e-liquid provider. (For

products sold in California.)

3. This Advanced Personal Vaporizer is only designed to be used with high

quality e-liquid. Please check with your e-liquid provider. This device is not

intended for use with loose tobacco leaf or herbal substances.

4. This Advanced Personal Vaporizer has not been evaluated by the Food and

Drug Administration and is not intended to treat, mitigate, prevent or cure any

disease or condition. This product is not intended for use as a smoking

cessation device.

5. The clearomizer/tank must be stored out of the reach of children and pets. All

empty clearomizers must also be disposed of properly and out the reach of

children and pets.

6. This Advanced Personal Vaporizer includes small parts such as the mouth

piece. Always keep any small parts out of reach of children and pets to prevent

swallowing or other harm.

7. Do not misuse, mishandle or store your Cool Fire IV Plus Advanced Personal

Vaporizer improperly. Even though it is made of high quality stainless steel it

may become damaged when dropped or otherwise mishandled.

8. Do not attempt to repair the unit by yourself as damage or personal injury may

occur.

9. In order to guarantee the normal functioning of your Cool Fire IV Plus

Advanced

Personal Vaporizer, and maximize vaping pleasure, we strongly advise that

you charge the battery when the power level drops below 10 percent.

10. In order to prolong the operation of your Cool Fire IV Plus Advanced Personal

Vaporizer, please do not place or store this Cool Fire IV Plus Advanced

Personal Vaporizer in excessively hot or cold environments.

11. Obey local laws or regulations regarding Electronic Cigarettes when vaping.

you are in an area where there are any bans or potential dangers, please do

not use your Cool Fire IV Plus Advanced Personal Vaporizer.

13. Do not allow any liquids or ejuice to enter the device through the top

threading or the USB ports. If any liquids enter the device, or come into

contact with the PCB, please discontinue using or charging the device and

contact your local Authorized Innokin Vendor immediately.

14. Keep your Cool Fire IV Plus Advanced Personal Vaporizer away from sources

of excessive heat as damages may occur.

15. Do not drop, throw, or mishandle your Cool Fire IV Plus Advanced Personal

Vaporizer as the outer shell or inner components may become damaged.

16. Innokin Technology is not responsible for any clearomizer or battery damage

due to the use of low quality eLiquid or dry herb.

17. Innokin Technology is not responsible for battery and charger explosions, or

malfunctions, due to the use of a low-quality charger. Only use the original

Cool Fire IV Plus Advanced Personal Vaporizer starter kit charger to charge

your Cool Fire IV Plus, We strongly recommend that you use a high quality 5V

1A USB wall charger (CE/UL Certied).

The Cool Fire IV Plus supports high quality (CE/UL Certied) 5V 2A USB Wall

Chargers (not included).

Micro USB Cable Plug Port

OLED Display Screen

“+” button: Cool Fire IV Plus /VW+

“-” button: Cool Fire IV Plus /VW-

Firing, POWER ON,

POWER OFF button

18. The Cool Fire IV Plus is not designed for use with a car charger, The Cool Fire

IV Plus does not come included with a car charger.

Heat dissipation

vents

Connector

Ready to Vape?

Check that the Cool Fire IV Plus battery is charged and functioning properly.

Ensure that an atomizer is lled with eliquid and attached correctly. You must

have eliquid in the tank before you power on & activate the device.

Do not dryburn the coil.

Check the resistance of the attached coil and set the Cool Fire IV Plus wattage

according to the attached coil’s recommended wattage range.

The ideal wattage may vary according to eliquid and tank airow.

Do not set the wattage higher than the recommended level or you may

damage the coil. If the coil is damaged, or tastes burnt, replace the coil

immediately.

Begin at the low end of the recommended coil wattage range and steadily

increase the set wattage until you nd your perfect vape temperature &

The Cool Fire IV Plus LED Battery Level Indicator

The Cool Fire IV Plus battery capacity is displayed via green, yellow and red LED.

Green = Almost fully Charged.

When the Cool Fire IV Plus is fully recharged the LED light will power o.

Yellow = Half Power.

Red = Low Power. Charge the Cool Fire IV Plus.

1110

OPERATION GUIDE When the Cool Fire IV Plus has been powered on Hold the “ ” button down to

activate the unit. The color of the LED when the button is pressed indicates the

current power level.

When the “ ” power button is pressed (with a suitable clearomizer attached) the

OLED screen will display the attached atomizer resistance, voltage and wattage

and remaining battery charge.

When the “ ” power button is continuously pressed (with a clearomizer

attached), the OLED screen will display the attached atomizer resistance, voltage

output, vape timer and remaining battery charge.

To POWER OFF the Cool Fire IV Plus

The Cool Fire IV Plus has three buttons: “ ” Power button, "+" button and "-"

button.

“ ” button: Power – On/O Button

“+” button: Cool Fire IV Plus / VW+

“-” button: Cool Fire IV Plus / VW-

The large OLED screen readily displays all important information.

To POWER ON the Cool Fire IV Plus

ON/OFF Power Button

Press the power button“ ” three times in rapid succession to power on the

Cool Fire IV Plus. The main LED light will blink from red to yellow to green, after

which the Cool Fire IV Plus will enter standby mode. The nal color of the LED will

0.50Ω

0.00V

15.0W

0.50Ω

4.47V

10.0S

0.50Ω

32.0W

1.0S

OFF

Click 3x ON

The Cool Fire IV Plus wattage can be adjusted from 6.0 to 70 Watts in .5 Watt

increments by pressing the "+" or "-" buttons. If the wattage is decreased below

6 Watts it will cycle up to 70 Watts. If the wattage is increased from 70 Watts it will

cycle down to 6 Watts. Press the button “ ” to lock the set wattage and activate

the Cool Fire IV Plus.

Enter Variable Voltage Mode

Press and hold the “ ” power button & "-" button together for 1 second to enter

variable wattage mode.

Adjust Variable Voltage

When the Cool Fire IV Plus is in variable voltage mode press and hold the "+" or

"-" button and the set voltage will ash. Hold the button down to quickly increase

or decrease the set wattage.

1312

When the Cool Fire IV Plus is not in use, press the power button “ ” three times

in succession to power o the Cool Fire IV Plus.

Always power o the Cool Fire IV Plus when it is not being used, or when it is

going to be stored in a pocket, bag or purse.

Enter Variable Wattage Mode

Press and hold the “ ” power button & "+" button together for 1 second to enter

variable wattage mode.

Adjust Variable Wattage

When the Cool Fire IV Plus is in variable wattage mode press and hold the "+" or

"-" button and the set wattage will ash. Hold the button down to quickly

increase or decrease the set wattage.

0.50Ω

0.0W

4.00V

0.50Ω

0.00V

40.0W

The Cool Fire IV Plus voltage can be adjusted from 2.0 to 7.5 Volts in .1 Volt

increments by pressing the "+" or "-" buttons. If the voltage is decreased below 2

Volts it will cycle up to 7.5 Volts. If the voltage is increased from 7.5 Volts it will

cycle down to 2 Volts.

Press the power button “ ” to lock the set voltage and activate the Cool Fire IV Plus.

Ohms Meter & Battery Level Indicator & Pu Counter

With an atomizer attached, hold both the “+” and “-” buttons simultaneously and

the screen will display: the resistance of the attached atomizer, the battery voltage,

the number of pus since the device was last turned o and the last set voltage or

wattage.

OLED SCREEN ORIENTATION

Hold "+" and "-" button for 3 seconds to ip the horizontal orientation of the OLED

screen.

0.50Ω

0.0W -.-V

0.50Ω

0.00V

40.0W

0.50Ω

4.20V

100

SAFETY

15 second cuto

If the “ ” button is held for 15 seconds or longer the Cool Fire IV Plus Advanced

Personal Vaporizer LED will ash 10 times and then stop ring until the “ ”

button is released and pressed again.

Low Voltage Warning

The Red LED and Battery bar will blink 8 times when the battery capacity is lower

than 3.3V and the Cool Fire IV Plus will automatically power o.

Short Circuit/Atomizer Protection

Short Circuit/Atomizer Protection protects the Cool Fire IV Plus Advanced

Personal Vaporizer against shorted atomizers and will stop the unit from

functioning in unsafe conditions.

‘Vape while charging’ Technology

The Cool Fire IV Plus is recharged with a Micro USB cable. When plugged into a

suitable power source the Cool Fire IV Plus can be vaped and charged at the

same time with Innokin Technology’s ‘Vape while you charge’ pass-through

technology.

Remember last Voltage or Wattage setting

When the Cool Fire IV Plus is turned o it will remember the current voltage or

wattage setting and it will retain the setting when the Cool Fire IV Plus is

powered back on.

High compatibility 510 connector

The Cool Fire IV Plus threading is compatible with all standard 510 clearomizers

& atomizers including the iClear30, iClear30S , Gladius-X, and iSub Tanks.

The Cool Fire IV Plus features automatic real-time atomizer Ohms detection. If

the resistance of the atomizer is lower than 0.07, the LED will light solidly for 5

seconds, the Ohms bar will blink and the Cool Fire IV Plus will not power on.

If there is no Clearomizer/Tank attached, or the coil is 3.5 Ohm or above, the

screen will display

Check Atomizer

If the atomizer is not connected properly, or resistance is 3.5 Ohm or above, the

OLED screen will display "CHECK ATOMIZER ".

Over-Discharge Protection

The Cool Fire IV Plus Advanced Personal Vaporizer monitors battery voltage and

will automatically power o when the battery is over discharged.

0.07Ω

0.00V

40.0W SHORTED

0.0W

4.00V

Inhaltsverzeichnis

Andere Innokin Technology Elektronische Zigarette Handbücher

Innokin Technology

Innokin Technology Axiom M21 Bedienungsanleitung

Beliebte Elektronische Zigarette Handbücher anderer Marken

STEAMAX

STEAMAX TFV8 X-BABY Bedienungsanleitung

iQOS

iQOS 3 MULTI Bedienungsanleitung

Vaporesso

Vaporesso LUXE XR MAX Bedienungsanleitung

ZAZO

ZAZO PRO Mini 2 Bedienungsanleitung

Aquafog

Aquafog Turbo XE Handbuch

Electronic Cigarettes Australia Pty Ltd

Electronic Cigarettes Australia Pty Ltd AUSSIE BLUE ENDURANCE Bedienungsanleitung

UWELL

UWELL Whirl T1 Bedienungsanleitung

VooPoo

VooPoo VMATE Bedienungsanleitung

Yogs-Pfeifen

Yogs-Pfeifen E-PIPE nex KLASSIK Bedienungsanleitung

TSI Instruments

TSI Instruments 3075 Bedienungsanleitung

Vaporesso

Vaporesso GTX ONE Bedienungsanleitung

VooPoo

VooPoo DRAG 2 Bedienungsanleitung

Innova

Innova 3.0 Bedienungsanleitung

Aquafog

Aquafog XE CRSM Bedienungsanleitung

hi-Fun

hi-Fun hi-Cigarette Bedienungsanleitung

Neptronic

Neptronic SKH Series Bedienungsanleitung

Vaporesso

Vaporesso LUXE Q2 SE Bedienungsanleitung

iQOS

iQOS 3 DUO Bedienungsanleitung