I.Overview of Master Environmental Control C-1
Master Environmental Control C-1 is the most complete and intelligent environment control
system that applies to professional indoor growth on the market. Featuring with CO23-in-one
sensor (Temp/ Humid/-CO2/Light), Temperature and humidity sensor(with photocell), master
controller, LDA-1 Light adapter and AC station control modules, it can control up to 2 channels
of light (using LDA-1 adapter), 8 sensors (4 CO23-in-one sensors and 4 humid and temp
sensors), 4 temperature control devices, 4 humidity control devices and 4 CO2Generators.
Independent day and night control parameters can be set to maintain the optimal environmental
conditions around the clock for the crops to grow indoors. Master Environmental Control C-1's 3-
in-one sensor helps you to monitor temperature, humidity, and CO2level. You can install the
additional sensors to you help you better control and monitor the growing environment of the
plants.
You can easily set up daily lighting and specially designed light management in a convenient
manner. Master Environmental Control C-1 allows you to select the type of light (LED or HID) to
be controlled and can simultaneously employ 2 channels of independent or interlocked light
control logic in different modes to create multiple lighting layouts and growth spectra required
for plant growth. This system can efficiently monitor the temperature of the lighting system in
operation, to which it can control accordingly with advanced functions like auto-dimming,
overheat shutdown, sunrise, and sunset simulation.
The Master Environmental Control C-1 has 10 control signals (24V AC) output for different
devices. By connecting to the connector panel board in the distribution box, the signal line
(24V AC) can control devices like Air Conditioner, Heater, humidifier, dehumidifier, and non-
dimmable light lines. The independent AC station can also be connected through Mobus
RS485 to control CO2supplement devices. Or it can control the air conditioner, heater,
humidifier, dehumidifier, and other devices through Mobus protocol RS485. Master
Environmental Control C-1 is an intelligent and flexible control system that provides growers a
complete indoor gardening solution for maximum yield.
WARNINGS:
1. Follow all local and national electrical codes for installation requirements.
2. Master Environmental Control C-1 is specially designed for indoor use only. Please use our
Master Environmental Control C-1 accessories to ensure its best performance.
