Innovx FastSwitch 24 Betriebsanleitung

The Best Connections in the Business

)DVW6ZLWFK#57

Gigabit Ethernet Switch

Installation & Operation Manual

200R205-000

Issue 3

May 2006

This publication and the software it describes contain proprietary and confidential information. No part of this

document may becopied, photocopied, reproduced, translated or reduced to any electronic or machine-readable

format without prior written permission of General DataComm,Inc. The information in this document is subject

to change without notice. General DataComm assumes no responsibility for any damages arising from the use

of this document, including but not limited to, lost revenue, lost data, claims by third parties, or other damages.

If you have comments or suggestions concerning this manual, please contact:

General DataComm, Inc.

Technical Publications

6 Rubber Avenue

Naugatuck, Connecticut USA 06770

Telephone: 1 203 729 0271

Trademarks

All brand or product names are trademarks or registered trademarks of their respective companies or

organizations.

Documentation

Revision History - GDC P/N 200R205-000

Related Publications

-REV is the hardware revision (-000,-001, etc.)

-VREF is the most current software version (-V400 is Version 4.0.0.)

In addition to the publications listed above, always read Release Notes supplied with your products.

Issue Date Description of Change

1 January 2004 Initial Release

2 September 2004 Minor updates and corrections

3 May 2006 Minor updated and corrections

Description Part Number

INNOVX FastRoute Router Card Installation & Operation Manual 200R200-REV

Installation & Operation Manuals for compatible INNOVX elements Refer to the GDC

Publications CD, or go to

www.gdc.com

200R205-000 Innovx FastSwitch 24 i

Issue 3 Installation and Operation Manual

Table of Contents

Preface

Safety Information ................................................................................................................... vi

Compliance ............................................................................................................................. vii

Support Services and Training............................................................................................... viii

Corporate Client Services.................................................................................................viii

Factory Direct Support & Repair .....................................................................................viii

Contact Information .........................................................................................................viii

Chapter 1: Introduction & Specifications

Product Overview .................................................................................................................. 1-1

Intended Use.....................................................................................................................1-1

Features and Benefits .......................................................................................................1-2

Management Access.........................................................................................................1-2

FastSwitch Applications...................................................................................................1-3

Port Statistics...................................................................................................................1-4

Factory Default Settings...................................................................................................1-4

Technical Specifications........................................................................................................ 1-5

Chapter 2: Installation & Connections

Overview................................................................................................................................ 2-1

Unpacking Instructions.....................................................................................................2-1

Front/Rear Panel Features ................................................................................................2-2

Installing Plug-in Components.........................................................................................2-3

Getting Started..................................................................................................................2-4

Chapter 3: Using the Web Interface

Web Browser Interface Overview.......................................................................................... 3-1

Accessing the WBI...........................................................................................................3-1

Port Status Web Page .......................................................................................................3-2

Port Statistics Web Page...................................................................................................3-4

Administrator Web Page........................................................................................................ 3-5

IP Address Setting............................................................................................................3-5

Switch Settings.................................................................................................................3-5

Console Port Information .................................................................................................3-8

Trunking...........................................................................................................................3-9

Forwarding and Filtering................................................................................................3-13

VLAN Configuration......................................................................................................3-16

Spanning Tree Protocol..................................................................................................3-22

Port Sniffer .....................................................................................................................3-24

SNMP Protocol...............................................................................................................3-25

ii InnovxFastSwitch24 200R205-000

Installation and Operation Manual Issue 3

Table of Contents

Security Manager...........................................................................................................3-26

802.1x.............................................................................................................................3-27

TFTP Update Firmware....................................................................................................... 3-30

Preparing for TFTP........................................................................................................3-30

Download Firmware ......................................................................................................3-30

Configuration Backup.......................................................................................................... 3-31

TFTP Backup Configuration..........................................................................................3-31

TFTP Restore Configuration..........................................................................................3-31

Default Configuration.......................................................................................................... 3-32

Reboot.................................................................................................................................. 3-32

Chapter 4: The Console Menu Line

Console Menu Line Overview............................................................................................... 4-1

Setting up the Management Station................................................................................. 4-1

Main Menu ............................................................................................................................ 4-2

Switch Static Configuration Menu........................................................................................ 4-3

Port Configuration Screen................................................................................................ 4-3

Trunk Configuration Screen............................................................................................. 4-5

VLAN Configuration Menu............................................................................................. 4-6

Miscellaneous Configuration Menu..............................................................................4-11

Administration Configuration Menu..............................................................................4-12

Port Mirroring Configuration.........................................................................................4-15

Priority Configuration Menu..........................................................................................4-16

MAC Address Configuration Menu...............................................................................4-17

Protocol Related Configuration Menu................................................................................. 4-19

STP Menu ......................................................................................................................4-19

SNMP Menu ..................................................................................................................4-21

GVRP Screen.................................................................................................................4-22

IGMP Screen..................................................................................................................4-22

LACP Menu...................................................................................................................4-23

802.1x.............................................................................................................................4-24

Status and Counters Menu................................................................................................... 4-24

Port Counters Screen......................................................................................................4-25

System Information Screen............................................................................................4-25

Reboot Switch Menu........................................................................................................... 4-26

Default............................................................................................................................4-26

Restart ............................................................................................................................4-26

TFTP Update Firmware....................................................................................................... 4-26

TFTP Update Firmware Screen .....................................................................................4-26

Restore Configure File...................................................................................................4-27

200R205-000 Innovx FastSwitch 24 iii

Issue 3 Installation and Operation Manual

Table of Contents

Backup Configure File ...................................................................................................4-27

Chapter 5: Console Line Interface

Command Line Interface Overview....................................................................................... 5-1

Setting up the Management Station..................................................................................5-1

Basic CLI Commands.......................................................................................................5-1

Control Keys.....................................................................................................................5-2

CLI Syntax Conventions .................................................................................................5-2

Logging In to the Switch..................................................................................................5-3

Serial Port Setup...............................................................................................................5-4

Port Configuration.................................................................................................................. 5-5

Display Port Configuration...............................................................................................5-5

Port Configuration Settings..............................................................................................5-6

MAC Aging............................................................................................................................ 5-8

Static MAC Address .............................................................................................................. 5-8

MAC Filtering........................................................................................................................ 5-9

VLAN..................................................................................................................................... 5-9

802.1Q VLAN................................................................................................................5-11

Port VID & Ingress filtering...........................................................................................5-11

Show VLAN...................................................................................................................5-12

GVRP .............................................................................................................................5-14

Spanning Tree Protocol (STP)........................................................................................5-14

Link Aggregation & Trunking Settings............................................................................... 5-16

Port Mirroring...................................................................................................................... 5-18

Broadcast Storm Filtering.................................................................................................... 5-19

IGMP Snooping ................................................................................................................... 5-20

802.1X.................................................................................................................................. 5-21

802.1x Feature Configuration.........................................................................................5-21

Priority ................................................................................................................................. 5-23

Priority Feature Configuration ......................................................................................5-23

Switch Settings..................................................................................................................... 5-25

Statistics............................................................................................................................... 5-26

Management Commands...................................................................................................... 5-26

SNMP................................................................................................................................... 5-28

SNMP Community.........................................................................................................5-29

SNMP Trap Manager .....................................................................................................5-30

Remote Monitoring.............................................................................................................. 5-31

System Utilities.................................................................................................................... 5-32

TFTP Backup or Upload Configuration:........................................................................5-32

TFTP restore or download configuration.......................................................................5-32

iv InnovxFastSwitch24 200R205-000

Installation and Operation Manual Issue 3

Table of Contents

Update Firmware............................................................................................................5-32

Default Configuration...................................................................................................5-33

Reboot............................................................................................................................5-33

Appendix A:Application Guidelines

Overview .............................................................................................................................. A-1

Terms and Acronyms...................................................................................................... A-1

Optional Equipment.............................................................................................................. A-3

Innovx Plug-in Components ........................................................................................... A-3

200R205-000 Innovx FastSwitch 24 v

Issue 3 Installation and Operation Manual

Preface

Scope of this Manual

This manual describes how to install, configure and operate the Innovx FastSwitch 24 Gigabit

Ethernet Switch. The information contained in this manual has been carefully checked and is

believed to be entirely reliable. This manual is intended for network administrators who are

responsible for installing, provisioning and managing the Innovx FastSwitch 24 device. It assumes

a basic working knowledge of Local area networks (LANs), Ethernet concepts, Ethernet switching

and bridging concepts and Internet Protocol (IP) concepts.

As General DataComm improves the reliability, function, and design of their products, it is possible

that the information in this document may not be current. Contact General DataComm, your sales

representative or point your browser to http:\\www.gdc.com for the latest information on

this and other General DataComm products.

General DataComm, Inc.

6 Rubber Avenue

Naugatuck, Connecticut 06770 U.S.A.

Tel: 1 203 729-0271 Toll Free: 1 800 523-1737

Manual Organization

This manual is divided into the following chapters. When using the digital version of this manual,

click on any link (shown in blue text) to jump to that section.

•Chapter 1, Introduction & Specifications

describes the Innovx FastSwitch 24 features and options. This chapter contains an overview

of product design, intended use and technical specifications.

•Chapter 2, Installation & Connections

provides directions for installing the FastSwitch 24 in an Innovx shelf or enclosure.

•Chapter 3, Using the Web Interface

describes the web and terminal (CLI and CMLI) interfaces used to configure and control the

FastSwitch 24.

•Chapter 4, The Console Menu Line

describes the web-based (HTTP) interface and web-based CLI used to configure and control

FastSwitch 24 operation.

•Chapter 5, Console Line Interface

describes the console (command) line interface for Telnet or serial RS-232 port access to the

FastSwitch 24 device.

•Appendix A, Application Guidelines

provides useful information on factory defaults, firmware maintenance and any special

application considerations.

Preface Safety Information

vi InnovxFastSwitch24 200R205-000

Installation and Operation Manual Issue 3

Safety Information

This manual should be read in its entirety and all procedures completely understood before

installing or operating the unit, including all notes, cautions and warnings (examples below). The

CAUTION, WARNING, and DANGER statements that appear throughout this manual are

intended to provide critical information for the safety of both the service engineer and operator.

These statements also enhance equipment reliability. The following definitions and symbols for

CAUTION, WARNING, and DANGER as they are used comply with ANSI Z535.2, American

National Standard for Environmental and Facility Safety Signs, and ANSI Z535.4, Product Safety

Signs and Labels, issued by the American National Standards Institute. .

Safety Guidelines

• Always use caution and common sense, especially when unsafe conditions or potentially

hazardous voltages are present.

• Repairs must be performed by qualified service personnel only.

• To reduce the risk of electrical shock, do not operate equipment with the cover removed.

• Never install telephone jacks in a wet location unless the jack is designed for that location.

• Never touch uninsulated telephone wires or terminals unless the telephone line is

disconnected at the network interface.

• Never install telephone wiring during an electrical storm.

Antistatic Precautions

This product may containstatic-sensitive devices that areeasily damaged by electrostatic discharge

(ESD). ESD occurs when a person whose body has built up static electricity touches a computer

component. ESD can cause computer components to fail. Take proper handling, grounding and

precautionary ESD measures when installing parts or cards. Keep parts and cards in antistatic

packaging when not in use or during transport. If possible, use antistatic pads on floor and

workbench. When handling components, always use an antistatic wrist strap connected to a

grounded equipment frame or chassis. If a wrist strap is not available, periodically touch an

unpainted metal surface on the equipment. Never use a conductive tool, like a screwdriver or a

paper clip, to set switches.

Note Indicates a note. It is something you should be particularly aware of; something not readily apparent.

A note is typically used as a suggestion.

Important Indicates an emphasized note. It is something you should be particularly aware of; something not readily

apparent. Important is typically used to prevent equipment damage.

CAUTION indicates conditions or practices that can cause damage to equipment or loss of

data.

WARNING indicates an imminently hazardous situation which, if not avoided, could result

in death or serious injury.

DANGER indicates an imminently hazardous situation which, if not avoided, will result in

death or serious injury.

Preface Compliance

200R205-000 Innovx FastSwitch 24 vii

Issue 3 Installation and Operation Manual

Compliance

FCC Part 15

This device complies with Part 15 of the FCC rules. Operation is subject to the following

conditions:

1. This device may NOT cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

Electromagnetic Compatibility

This Class A digital apparatus complies with Canadian ICES-003.

La Compatibilité d’ Eléctro-magnetique

Cet appareil numerique de la classe A est conforme a la norme NMB-003 du Canada.

Preface Support Services and Training

viii InnovxFastSwitch24 200R205-000

Installation and Operation Manual Issue 3

Support Services and Training

GeneralDataCommofferstwocomprehensivecustomersupportorganizationsdedicatedtopre-and

post-sale support services and training for GDC products. Corporate Client Services and Factory-

Direct Support & Repair assist customers throughout the world in the installation, management,

maintenance and repair of GDC equipment. Located at GDC’s corporate facility in Naugatuck,

Connecticut USA, these customer support organizations work to ensure that customers get

maximum return on their investment through cost-effective and timely product support.

Corporate Client Services

Corporate Client Services is a technical support and services group that is available to GDC

customers throughout the world for network service and support of their GDC products. Customers

get thereliable support andtraining required for installation,managementand maintenance of GDC

equipment in their global data communication networks. Training courses are available at GDC

corporate headquarters in Naugatuck, Connecticut, as well as at customer sites.

Factory Direct Support & Repair

GDC provides regularand warranty repair services through Factory Direct Support & Repair at its

U.S. headquarters in Naugatuck, Connecticut. This customer support organization repairs and

refurbishes GDC products, backed by the same engineering, documentation and support staff used

to build and test the original product. Every product received for repair at Factory Direct Support

& Repair is processed using the test fixtures and procedures specifically designed to confirm the

functionality of all features and configurations available in the product.

As part of GDC’s Factory Direct program, all product repairs incorporate the most recent changes

and enhancements from GDC Engineering departments, assuring optimal performance when the

customer puts the product back into service. Only GDC’s Factory Direct Support & Repair can

provide this added value.

Contact Information

General DataComm, Inc.

6 Rubber Avenue

Naugatuck, Connecticut 06770 USA

Attention: Corporate Client Services

Telephones: 1 800 523-1737

1 203 729-0271

Fax: 1 203 729-3013

Email: client[email protected]m

General DataComm, Inc.

6 Rubber Avenue

Naugatuck, Connecticut 06770 USA

Attention: Factory Direct Support & Repair

Telephones: 1 800 523-1737

1 203 729-0271

Fax: 1 203 729-7964

Email: factorydirect@gdc.com

Hours of Operation:

Monday - Friday 8:30 a.m. - 5:00 p.m. EST

(excluding holidays)

http://www.gdc.com

Inhaltsverzeichnis

Andere Innovx Schalten Handbücher

Innovx

Innovx )DVW6ZLWFK#57 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung