Insignia GT6000 Bedienungsanleitung

www.insigniarange.com Last Modied: 26/01/2017

INSTALLATION MANUAL

GT6000

ATTENTION INSTALLERS:

These instrucons must be

le with the customer

30 Day Technical Support: 01908 226545

(NOTE: This service is only available to customers from the day of delivery,

please have your supplier’s details and your postcode to hand before calling)

Replacements Parts: inside of your warranty contact:

www.insigniarange.co.uk/customerService.aspx

Spares/Replacements Parts: outside of your warranty

contact 0844 800 3069

www.insigniarange.co.uk

WARRANTY REG NO: __________________________

To claim your full 5 year warranty, register your shower within 90 days of delivery at: www.insigniarange.co.uk/

warrantyreg.aspx. Standard 12 month warranty applies if outside this me period.

CHECK ALL CONTENTS BEFORE BUILD COMMENCES. NO RETURNS CAN BE MADE

ONCE THE BUILD HAS STARTED AS IT IS DEEMED ACCEPTANCE OF PRODUCT!

www.insigniarange.com Last Modied: 26/01/2017

Contents

Introduction

Electrical Requirements

What’s In The Boxes?

Screw Pack Contents

Plumbing Requirements

Schematics

Starting The Installation

Electric Box Connections

Steam Generator Connections

Sealing and Water Testing

MK117 Control Panel Instructions

Help Book Information

Parts List

www.insigniarange.com Last Modied: 26/01/2017

Thank you for your recent purchase of an Insignia shower. Please read this booklet with great care to ensure you get the best out of your build and have a shower that

will last for many years to come!

Like everything, in order to obtain a first class product that will serve you well for many years, the effort and correctness put into the assembly will reflect in the quality of

your finish.

OUR BADGE RATING IN TERMS OF DIFFICULTY OF ASSEMBLY IS BASED ON CLIENT FEEDBACK

1 Badge = Very easy

2 Badges = Easy

3 Badges = Moderate

4 Badges = Harder than average

5 Badges = Professional skills required

This shower is rated 3 Badges

www.insigniarange.com Last Modied: 26/01/2017

ASSEMBLY AND PLUMBING

THIS PRODUCT BUILD IS RATED SUITABLE FOR DIY PURPOSES PROVIDING THE CUSTOMER IS OF ABOVE AVERAGE SKILL AND FEELS CONFIDENT IN

THEIR ABILITY. ONLY YOU THE CUSTOMER WILL KNOW THIS SO BEFORE ANY ATTEMPT IS MADE TO ASSEMBLE, READ THROUGH THE FOLLOWING

PAGES IN DETAIL THEN DECIDE. IF YOU HAVE ANY DOUBT USE THE SERVICES OF A PROFESSIONAL. IN PICKING SUCH, ALLOW THEM TO DECIDE IF

THEY ARE CAPABLE OF BUILD BY FIRST SHOWING THESE INSTRUCTIONS TO THEM. ALWAYS GET THREE QUOTES.

REMEMBER THE BEST IS NOT ALWAYS THE CHEAPEST!

REMEMBER PLUMBERS PLUMB! 90% OF THIS JOB IS NOT PLUMBING!

DUE TO THE NATURE OF THIS PRODUCT WE HIGHLY ADVISE THE PURCHASE AND FITTING OF A WATER SOFTENER

(PLEASE NOTE LIMESCALE BUILD UP MAY CAUSE DAMAGE TO YOUR SHOWER AND WILL NOT BE COVERED UNDER WARRANTY)

ELECTRICAL CONNECTION TO HOUSE MAINS

WHEN YOUR ITEM IS ASSEMBLED ALWAYS USE THE SERVICES OF A FULLY QUALIFIED ELECTRICAN COMPANY TO COMPLETE THE CONNECTION FROM

SHOWER TO THE HOUSE SUPPLY. LAWS DEMAND IN MANY CASES YOU DO THIS AND YOUR WARRANTY IS VOID IN REGARDS TO THE ELECTRICAL

ITEMS IF THIS IS NOT UNDERTAKEN.

YOURS AND OTHERS SAFETY IS PARAMOUNT. NEVER ATTEMPT THIS YOURSELF!

REMEMBER:

These showers are designed to be free standing and movable from their location should you have the need to replace anything. ALWAYS USE Flexible braided water

inlet pipes (not supplied) at least a metre long (not central heating plastic type!)

Always use a flexible waste pipe from your house supply to the shower .

NEVER FIX with rigid pipes, NEVER FIX the unit to the wall.

DURING BUILD, LIKE ALL SHOWERS CORRECT SEALING IS IMPERATIVE.

If you are using Insignia’s RubberGum, please ensure the product does not come in contact with your silicone as this will cause the RubberGum to fail and

will not adhere as intended.

ATTENTION

ALWAYS FIT EASY TO GET TO ISOLATION TAPS ON BOTH THE HOT AND COLD WATER SUPPLY (NOT SUPPLIED). JUST LIKE A

DISHWASHER OR WASHING MACHINE, THIS PRODUCT MUST BE ISOLATED WHEN NOT IN USE.

FLEXIBLE SUPPLY HOSES (NOT SUPPLIED) COUPLE HERE AS ORIGIN OF SUPPLY

www.insigniarange.com Last Modied: 26/01/2017

TOTAL ELECTRICAL REQUIREMENTS

Voltage Rating 220 -240AC

Frequency Rating 50HZ

Power Rating 2.8KW

Your electrical contractor should understand ALL legal requirements of connection before undertaking any work or installation.

UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF!!!

Note for electrician. This product comes with 13 amp plug(s) fitted with an RCD unit. We leave it this way for you to connect this your own way

due to continued additions to current regulations. As at October 2010 we offered two methods.

1) Connect within current laws and IP directives using plug and RCD provided with steam version or supply one for non steam version

2) (Preferred) Wire into isolated fused feed connecting directly to the house consumer/service box. Remove the fitted plug and ensure the

Consumer unit has capabilities to replace RCD feature if RCD is removed.

Always use protection against electrical surge. Your shower should be treated the same as a home computer. A surge protector should

eradicate the possibility of either the transformer or computer control being burnt out. Please note earth is required and found on chassis of

shower tray. A further earth is required from Steam Generator unit. Each earth must ground through power supply line.

www.insigniarange.com Last Modied: 26/01/2017

Tool Requirements

None Supplied

Scissors Stanley Blade Silicone Gun Spirit Level Tape Measure Philips Screwdriver Electric Drill

Adhesive Requirements

Bacteria Resistant Sanitary Silicone - (for vertical joints) RubberGum Plumbers Mait (for waste joints)

Not Supplied Supplied Not Supplied

Hardware Requirements

A Steam Shower requires 3 x 1 Metre Braided Hose

Not Supplied

www.insigniarange.com Last Modied: 26/01/2017

Whilst the next steps show you how to assemble your shower we want to make sure you have a correct build to ensure you get a trouble free shower. Therefore our advice

is to follow the instructions and perform a dry run to ensure you are confident with the build and you understand fully how the unit is assembled. When we use the word

“DRY RUN” this means you do not silicone anything, just simply construct the shower, align, drill and screw everything together. Once you are happy with the build take the

unit apart and carry out the final fix.

What’s In The Boxes?

Tray Box

1x Tray

1x Roof

2x Curved Rails

Glass Room

2x Door seals

2x Glass doors

2x fixed glass

Column

1x Complete Column

Backwalls

1x Left Panel Backwall

1x Right Panel Backwall

In addition to above you will have all the required internal accessories to complete the shower

www.insigniarange.com Last Modied: 26/01/2017

Insignia Screw Pack

VERY IMPORTANT

Have you got everything? If not please contact the Insignia Support Line on 01908 226545. Remember NEVER book your tradesman until everything has arrived, been

checked and is present. No replacement/missing parts can be obtained free of charge during or after the build. Any claims can only be within the timescale permitted (48

hours after delivery) and always BEFORE build.

Product Code Descripon Quanty

SP097 Door Handles 2

SP207 Twin Chrome Wheels - Push Buon 8

ST20 20mm Screws 20

ST35 35mm Screws 10

ST14 14mm Screws 6

ST25 25mm Screws 10

SW9 Small Washers 20

DB9 Drill Piece 1

Note: In some cases you may have more screws than needed, this is done so you have spares!

www.insigniarange.com Last Modied: 26/01/2017

Pressure Requirements from your house supply

We recommend a bar pressure between 2.5 and 3.4 BAR. If you have a combi boiler system no problem should be experienced. If you have a gravity feed older type

installation (hot water tank type usually less than 1 bar) you will almost certainly need a pump. We cannot advise on which type of pump is used, location or design because

all house plumbing layouts vary. This is a job for your installer/plumber. The end delivery however must fall within the scope above.

Important Note Do not exceed 3.4 BAR pressure under any circumstances. Warranty is void if so as damage will occur. If you have a combi sup ply, please use a

pressure reducing valve if required to lower the BAR pressure to the shower.

Please Remember that this product is free standing and is designed to be pulled away from the wall.

The waste hose must be of a flexible type (1m flexible waste supplied).

The water supply pipes need to be at least 1 metre in length and must be that of a flexible braided type (not supplied).

DO NOT OVERTIGHTEN THE BRAIDED HOSES AS IT CAN CAUSE THE CONNECTION TO POP AFTER A FEW WEEKS OF USE

www.insigniarange.com Last Modied: 26/01/2017

Inhaltsverzeichnis

Andere Insignia Badezimmerarmatur Handbücher

Insignia

Insignia INS8058.1R Bedienungsanleitung

Insignia

Insignia Premium Series Bedienungsanleitung

Insignia

Insignia Premium Series Bedienungsanleitung

Insignia

Insignia MY810L Bedienungsanleitung

Insignia

Insignia Diamond Series Bedienungsanleitung

Insignia

Insignia INS8059.1L Bedienungsanleitung

Insignia

Insignia MC115RT Bedienungsanleitung

Insignia

Insignia GT4000 Bedienungsanleitung

Insignia

Insignia INS8719 Bedienungsanleitung

Insignia

Insignia KSY1450 Series Bedienungsanleitung

Insignia

Insignia 1800 Series Bedienungsanleitung

Insignia

Insignia Diamond Series Bedienungsanleitung

Insignia

Insignia 1500 Series Bedienungsanleitung

Insignia

Insignia MC90CQ Bedienungsanleitung

Insignia

Insignia ECO Series Bedienungsanleitung

Insignia

Insignia Platinum Series Bedienungsanleitung

Insignia

Insignia ES001 Bedienungsanleitung

Insignia

Insignia Monochrome Series Bedienungsanleitung

Insignia

Insignia Premium Series Bedienungsanleitung

Insignia

Insignia Platinum Series Bedienungsanleitung

Insignia

Insignia INS9012 Bedienungsanleitung

Insignia

Insignia GT9014 Bedienungsanleitung

Insignia

Insignia ES009 Bedienungsanleitung

Insignia

Insignia MX Series Bedienungsanleitung

Beliebte Badezimmerarmatur Handbücher anderer Marken

DURAVIT

DURAVIT C.1 C15240 0090 Handbuch

Sunshower

Sunshower PURE SOLO Bedienungsanleitung

Heatstore

Heatstore HSTRL500WTN Bedienungsanleitung

Delabie

Delabie Delabie Sporting 714700 Bedienungsanleitung

Kohler

Kohler K-13056 Montageanleitung

ESS

ESS Container TCL-11 Bedienungsanleitung

Mustee

Mustee 22C Bedienungsanleitung

VITRA

VITRA V-Flow Bedienungsanleitung

Malmet

Malmet B105BT Bedienungsanleitung

bathstore

bathstore Transition H1690MM Leitfaden

baliv

baliv DUK-80.30 T Bedienungsanleitung

baliv

baliv DU-5160 Bedienungsanleitung

BELLOSTA

BELLOSTA Edward 0800/M Bedienungsanleitung

Franke

Franke PRTR0006 Bedienungsanleitung

Gessi

Gessi RILIEVO 59011 Bedienungsanleitung

noken

noken VITAE 100188525-N299998810 Bedienungsanleitung

Allen + Roth

Allen + Roth 1142VA-30-201 Bedienungsanleitung

Britex

Britex HBDA Bedienungsanleitung