Inspur D2000 Bedienungsanleitung

USER MANUAL

Inspur Software Group Ltd

No. 2877 Kehang Rd., Jinan, Shandong, 250104, P.R.China

Tel：（+86）4008122330

Fax：（+86）0531-85105300

http: //www.inspur.com

2



Contents

1.Introduction ..............................................................3

Safety Precautions ...........................................................................3

2.Appearance...............................................................5

3.Connection................................................................6

Direct connection with TV ..............................................................6

Connection with TV via HDMI cable .............................................6

4.Remote Controller ....................................................7

Key Function ...................................................................................7

Notes ................................................................................................7

Pairing..............................................................................................7

5. Operation Instructions..............................................9

Contents in the box ..........................................................................9

Specifications...................................................................................9

Network Connecion .........................................................................9

6. Troubleshooting .......................................................9

7. Third party software declaration............................10

8. Special Notes .........................................................11



3



1.Introduction

Dear Subscriber，

Thank you for purchasing the product from Inspur Software Group Ltd.

The information provided are for guidance only, the company reserves the right to

change the specs without notice.

Please read this manual carefully before using this product.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

This equipment complies with FCC RF radiation exposure limits set forth for an

uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20

centimeters between the radiator and your body.

SafetyPrecautions

1Only place the device on stable surfaces, and ensure the device ventilation

and avoid direct sunlight.

2When installing this unit, make sure to leave space around the unit (at least

10cm at top, 10cm at rear and each side).

3Do not disassemble the device without permission in case of any device

failure, Please contact call center when you find any problems.

4Keep the device away from electrical appliances with strong electric or

magnetic fields while installation, such as microwave oven, refrigerator and

mobile phones.

5Do not install the device on a flammable object, such as foam material, etc.

6Do not put the device close to flame, such as lighted candles, electric heater

in operation, etc.

7Do not expose the device to water dripping or splashing environment, and

never place something filled with liquid on it, such as vases, etc.

8Keep power plug clean and dry, and never use damaged power wire.

9Do not place any object on the power plug or power wire, to ensure that the

power plug can be easily plugged out.

10 Only use a water-dampened soft-cloth to clean the surface of this product.

11 Keep hands dry when plugging in and plugging out connection cables.

12 To avoid visual impairment, do not look directly at IR (Infrared Radiation)

of the remote controller.

13 Do not allow children to use the device or play with small accessories

without watching,

14 Please use the device at temperature from -10ºC to 40ºC.

4



15 Applies to areas below the altitude of 5000 only.

16 Applies to tropical climates.

17 Please disconnect power and unplug power wire in the following

conditions:

Liquid flowing inside the case accidentally,

Abnormal situations such as smoking, peculiar smell, abnormal sound,

etc.

Before cleaning the device,

During thunderstorm or lightning weather,

When the unit is unused for long periods of time.

Warning: Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to operate the

equipment.

Note: This equipment has been tested and found to comply with the limits for a

Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception,which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

5



2.Appearance





6



3.Connection

DirectconnectionwithTV



ConnectionwithTVviaHDMIcable



7



4.RemoteController

KeyFunction

1. [red ] Power on/Standby

2. [▲] Next channel; move up in the

list

3. [◄] Decrease volume; move left

in the list.

4. [OK] Display current program list

or to select setting

5. [►] Increase volume; move right

in the list.

6. [▼] Previous channel; move down

in the list.

7. 【】Enter the main launcher

8. 【】Back to the last menu

9. 【】Enter the menu

10.【-VOL】Decrease the volume of TV

11.【VOL+】Increase the volume of TV

12.【】Voice control

Notes

The remote controller has paired

with the device via Bluetooth, you

can use the remote controller to

control the HDMI Dongle directly. If

the remote controller is lost or

broken and other cases that you need

to replace it, please pair the remote

controller with the device again.

Pairing

1. Press the “ ” and “ ” key for 5 seconds until the red light flashes, the

flashing state means “pairing”.

2. The device will detect the nearby remote controller, and once the

Bluetooth is detected, it will remind you whether or not to connect to the new

Bluetooth remote controller.

8



3. When indicating the reminder, the device will pair with the new Bluetooth

remote controller automatically if no operation occurs within ten seconds.

4. After indicating “connect succeed”, the Bluetooth RC can be used

normally.



9



5.OperationInstructions

When you use the device for the first time, please follow the steps below.

Contentsinthebox

Once you open the box, you will find the following items:

NO. DEVICE

1 HDMI DONGLE

2 RC

3 User Manual

4 Power adapter

Specifications

Adapter Output Voltage DC,5V/2A

Working Temperature -10 ~ 40°C

Operational Humidity 5%-90%（RH）

NetworkConnecion

The HDMI dongle must connect to an existing WiFi network. If you have a

wireless network, enter the settings, select the wireless network, and press the

OK key, enable wireless mode, then select your WiFi, enter the password and

click the link button to connect to the network.

As long as the network was connected, press the home button to enter the

client, you can enjoy the rich video.

6.Troubleshooting

1. No image, no sound

The power adapter is not connected well, please reconnect.

The TV is not switched to the correct source, please switch to the correct

HDMI source

10



The HDMI cable is connected incorrectly, please reconnect.

2. Only sound, no image

The HDMI cable is connected incorrectly, please reconnect.

The brightness of the TV or HDMI Dongle is adjusted to the minimum,

please adjust the brightness.

3. Only image, no sound

The TV or HDMI Dongle has been set into the mute mode, please press

the 【mute】button to turn on the sound.

The sound of the TV or HDMI Dongle is adjusted to the minimum,

please adjust the volume.

4. The image is paused or indicate “buffering”

The signal quality of wireless network is poor, please connect to the

network with better quality.

The server is adjusting the program source.

5. Indicates that the network can not be connected

The wireless network is blocked, please check the network connection.

The device is not authorized, please contact your network operator.

6. The remote controller is insensitive

The battery inside the remote controller is not enough or the battery is

not installed properly. Replace the battery or install the battery properly.

There is an obstacle between the remote controller and the HDMI

Dongle, please avoid the obstacle.

The remote controller is out of the effective range of receipt, please use

the remote controller within the effective range.

There are other interference signals, please try to avoid interference of

other signals when controlling the device.

Ensure that the remote controller has been paired successfully with the

HDMI Dongle.

7.Thirdpartysoftwaredeclaration

These third party software and applications provided via this product are owned

by all third parties, our company does not provide any guarantee for these third

party software and applications as we do not own the intellectual property rights

of them. Our company will not provide support to these software and applications,

nor assume any responsibility for the functionality of these software and

applications.

Third party software and application services may be interrupted or terminated.

Our company does not guarantee that any content or service can be maintained its

availability during any time. The third party transmits content or services through

the network and transmission tools which are out of our control scope. Within the

bounds of the relevant law, our company has made it clear that we will not

assume any responsibility for the interruption or termination of any content or

service provided by this product. Our company does not assume any

Inhaltsverzeichnis

Andere Inspur Computerhardware Handbücher

Inspur

Inspur NF5180M5 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung