Insta360 GO 2 Bedienungsanleitung
QUICKSTART GUIDE
English · · Deutsch · Français · Italiano · Español
Pусский · Português · · 한국어 · ·
Names of Parts
GO 2
Lens
Action
Button
Status
Indicator
Charging
Points
Microphone
Charge Case
Type-C Charging Port
1/4'' Mounting Point
(Charge Case When Open)
Screen
Record Button Mode
Button
Status
Indicator
Charging Points
Charging
Place GO 2 into the Charge Case for charging
Before use, make sure that your GO 2 and its Charge Case are fully charged.
To take out GO 2:
As shown below, use your thumb to
gently take GO 2 out from the top.
1
EN
Connect the included charge cable to the Charge Case to charge it.
Connect to a
5V 2A power
adapter
Downloading the App & Activating
Shooting
Step 1: Scan the QR code (https://www.insta360.com/
download/insta360-go2) or search "Insta360" in the
App Store or other Android app stores to download the
Insta360 app.
Refer to the "Button Instructions" card included in the box for instructions on how to
use GO 2's Action Button and Charge Case buttons. You can customize the Action
Button's basic functions to your preference in the app. For more product information,
visit: https://www.insta360.com/support/product-support
Step 2: Turn on your mobile device's WiFi. Then long press the Action Button for 1
second to power on GO 2.
Step 3: Open the Insta360 app, tap the camera icon at the bottom of the app
homepage, swipe until you see GO 2 and tap "Connect Now". Select the device you
want to connect to and follow the onscreen instructions to complete the connection.
The name of your camera is "GO 2 " by default, where
is the last six digits of the serial number on the box your GO 2 came in. The first
time you connect to GO 2, please single press its Action Button to confirm your
connection.
Step 4: After successfully connecting the camera, follow the app prompts to activate
your camera. The app will prompt you to update the firmware if there is a new
version available. Please follow the on-screen prompts to update the firmware
of GO 2 and the Charge Case.
Previewing via the App
After shooting, connect your GO 2 to the Insta360 app and go to the Album page to
view your clips. You can also take photos or videos via the app and preview your shot
in real-time.
* Note: As system files and cache take up some memory, the actual available storage
space will be slightly less than the total memory.
2
EN
C1. Pivot Stand: Attaching to
a Flat Surface
Slide the Pivot Stand base's
cover down to remove it, then
stick the Pivot Stand onto a
clean and flat surface.
C2. Pivot Stand: Handheld
Use (For Underwater)
Rotate the camera frame
out 180° and then hold the
Pivot Stand's base to shoot.
*Image for reference only. Accessories vary based on specific bundle.
B. Easy Clip
(Place GO 2 into the Easy Clip so it snaps into place.
Rotate the camera frame to adjust the shooting angle.
It's suggested to adjust the angle slightly downward.)
Mounting GO 2
A. Magnet Pendant
The Magnet Pendant should be
worn underneath your shirt with
the diagram facing out. Place GO 2
over your shirt so it snaps on.
• Accessories:
GO 2 and its accessories contain small objects. Keep them out of children's reach to
prevent swallowing.
Notes
3
EN
• Updating the firmware:
Before use, please update the firmware of GO 2 and the Charge Case.
Before updating, ensure that both GO 2 and the Charge Case's remaining power is not less
than 50%.
How to update via your computer (U-disk mode):
Step 1: Download the latest firmware from Insta360's official website.
Step 2: Use the included charge cable to connect the Charge Case (with GO 2 placed within) to
your computer, and make sure both GO 2 and the Charge Case are powered on.
Step 3: Copy the "InstaGo2FW.pkg" file you've downloaded to your GO 2 directly. Delete the old
"pkg" file first if there is one.
Step 4: Disconnect the Charge Case from your computer and GO 2 will power off
automatically. Close the Charge Case and open it again, then GO 2 will power on automatically
and start updating the firmware with a slow-flashing cyan light. After finishing GO 2's firmware
update, the Charge Case will start to update its firmware as well. Please keep the Charge Case
open.
For more information on updating the firmware, visit: https://onlinemanual.insta360.com/
go2/en-us/camera/firmware
* To exit U-disk mode, please eject the device from your computer before unplugging the
charge cable.
• Indicator status:
• Bluetooth control via Charge Case:
Camera/Charge Case Status Camera/Charge Case's Indicator
Camera/Charge Case is powering on Solid blue
Camera/Charge Case (with GO 2 connected) is in
standby mode Solid cyan
Camera/Charge Case is off and charging Solid red
Camera is off and fully charged Indicator off
Charge Case is off and fully charged Solid green
Camera/Charge Case is recording White light slowly flashes
Camera/Charge Case is in U-disk mode Blue light rapidly flashes
Camera/Charge Case is updating firmware Cyan light slowly flashes
Error Notices
Storage error Blue light rapidly flashes
GO 2 needs to cool down
Yellow light rapidly flashes when it's
on, red light rapidly flashes when it's
off
By default, your GO 2 and the included Charge Case are automatically paired via Bluetooth.
When you open the Charge Case, it will power on automatically and connect to the paired GO 2.
Once your GO 2 and Charge Case are powered on, you can control GO 2 via the Charge Case.
If you purchase a GO 2 or Charge Case separately, place your GO 2 into the Charge Case
and power them on. They will automatically pair via Bluetooth.
The effective WiFi connection range and Bluetooth range is 33 feet (10 meters) in optimal
conditions.
Avoid using all accessories in high-speed or high-intensity environments, otherwise your
camera or accessories may fall off.
As thick clothing can weaken the magnetic force of the Magnet Pendant, please do
not use GO 2 with thick clothing and always test GO 2's stability before shooting.
If you wear a cardiac pacemaker, do not wear the Magnet Pendant.
When using the Pivot Stand, please attach it to dry, clean and flat surfaces only. Avoid
attaching it to surfaces with strong vibrations.
Peel the Pivot Stand off surfaces from the edge of the base. Do not pull it off from the
center.
If the Pivot Stand has lost stickiness, clean with water and dry for re-use. After use,
place its original cover back on. Avoid sticking the Pivot Stand in high or low temperature
environments.
4
EN
GO 2
GO 2
Type C
1/4
GO 2
5
CHS
https://www.insta360.
com/download/insta360-go2
https://www.insta360.com/support/product-support
USB Type C
app app
6
CHS
7
CHS
U
https://onlinemanual.insta360.com/go2/zh-cn/
camera/firmware
* U
8
CHS
Inhaltsverzeichnis
Sprachen:
Andere Insta360 Digitalkamera Handbücher
