Integra DRC-R1 Installationsanleitung
Basic Manual
Hookup
Step1: Speaker Layout ............................................................3
Step2: Connecting Speakers via a Power Amplifier ................9
Step3: Connect the TV ..........................................................12
Step4: Connect the AV Components .....................................14
Step5: Multi-zone Connection ...............................................18
Step6: Connect Other Cables ................................................21
Setup
Step7: Power On & Initial Setup ............................................22
HDMI Setup ...........................................................................23
Playback
Basic Playback ......................................................................24
Network Functions .................................................................25
Others ....................................................................................26
Part Names
Front Panel ............................................................................29
Rear Panel ............................................................................30
Remote Controller .................................................................31
Display ...................................................................................31
This manual includes information needed when starting up and also
instructions for frequently used operations. The "Advanced Manual" is
available on the internet with details about the playback features/
listening modes/settings details, specifications, and troubleshooting.
The Advanced Manual is created in a format that makes it easy to read
on a PC or Smartphone.
http://integraworldwide.com/manual/drcr1/adv/en.html
Advanced Manual found here
AV Controller
DRC-R1
> Before start > Hookup > Setup > Playback > Part Names
SN29402434A_DRC-R1_BAS_En_1703XX.book 1 ページ ２０１７年３月１４日 火曜日 午後７時２６分
2
> Before start > Hookup > Setup > Playback > Part Names
What's in the box
1. Main unit 2. Remote controller (RC-913R)
×1, Batteries (AAA/R03) ×2
3. Indoor FM antenna ×1 4. AM loop antenna ×1 5. Speaker setup microphone ×1
6. Power cord ×1
Glossary
Dolby Atmos
This unit supports playback in the Dolby Atmos format which provides 360e sound placement. Unlike existing
surround systems, Dolby Atmos doesn't rely on channels, but rather enables the accurate placement of sound
objects that have independent motion in a three-dimensional space with even greater clarity. Dolby Atmos is an
optional audio format on Blu-ray Discs and achieves a three-dimensional sound field by introducing a sound field
above the listener.
ARC
The ARC (Audio Return Channel) feature transfers TV audio signals via HDMI cable so that you can play the
audio from the TV through this unit. Connection to an ARC compatible TV is complete with one HDMI cable. Refer
to the instruction manual for your TV to see if it supports ARC. (
Ä
P12)
HDMI CEC functionality
Control features such as linking input switching with the input selector and players conforming to the CEC
standard, switching audio output and volume using the remote controller of a CEC-compliant TV, and
automatically switching this unit to standby when the TV is turned off (
Ä
P14)
HDMI Standby Through
Video and audio signals from AV components can be transmitted to the TV even if this unit is in standby (
Ä
P14)
CAUTION: The power cord must be connected only after all other cable connections are completed. We
will not accept responsibility for damage arising from the connection of equipment manufactured by other
companies.
1
2
56
34
SN29402434A_DRC-R1_BAS_En_1703XX.book 2 ページ ２０１７年３月１４日 火曜日 午後７時２６分
3
> Before start > Hookup >Setup >Playback >PartNames
Step1: Speaker Layout
＊1
＊2
＊3
＊1: 22e〜30e, ＊2: 90e〜120e, ＊3: 135e〜150e
12
Front Speakers
3
Center Speaker
45
Surround Speakers
6
Powered Subwoofer
78
Surround Back Speakers
7.1-Channel System
Front speakers output front stereo sound and a center
speaker outputs center sound such as dialogs and vocals.
Surround speakers create back sound field. Powered
subwoofer reproduces bass sounds and creates rich
sound field.
Surround back speakers improve the sense of
envelopment created by the back sound field and provide
a more realistic sound field. Furthermore, by installing
surround back speakers, you can select the Dolby Atmos
listening mode, which realizes the most up-to-date 3D
sound, when the input format is Dolby Atmos.
The front speakers should be positioned at ear height,
while the surround speakers should be positioned just
above ear height. Center speaker should be set up facing
the listening position.
Placing the powered subwoofer between the center
speaker and a front speaker gives you a natural sound
even when playing music.
The optimal positioning is for surround back speakers to
be at ear height.
0If you are including surround back speakers in the
setup, surround speakers are required.
Go To "Hookup" (
Ä
P9)
SN29402434A_DRC-R1_BAS_En_1703XX.book 3 ページ ２０１７年３月１４日 火曜日 午後７時２６分
4
> Before start > Hookup >Setup >Playback >PartNames
＊1
＊2
＊3
3´ (0.9 m)
or more
3´ (0.9 m)
or more
＊1: 22e〜30e, ＊2: 90e〜120e, ＊3: 135e〜150e
9:
Height Speakers
$
$
Front High Speakers
Rear High Speakers
Height Speakers;
Front High Speakers/
Rear High Speakers
These are types of height speakers. Furthermore, by
installing height speakers, you can select the Dolby
Atmos listening mode, which realizes the most up-to-date
3D sound including overhead sounds, when the input
format is Dolby Atmos.
Front high speakers or rear high speakers should be
situated at least 0.9 m higher than the front speakers.
Front high speakers should be situated directly above the
front speakers and the distance between the rear high
speakers should match the distance between the front
speakers. Both should be set up facing the listening
position. Note that with height speakers you can install up
to two sets; Height 1 Speaker and Height 2 Speaker.
Go To "Hookup" (
Ä
P9)
SN29402434A_DRC-R1_BAS_En_1703XX.book 4 ページ ２０１７年３月１４日 火曜日 午後７時２６分
5
> Before start > Hookup >Setup >Playback >PartNames
＊1
＊2
＊3
＊1: 30e〜55e, ＊2: 65e〜100e, ＊3: 125e〜150e
9:
Height Speakers
$
$
$
Top Front Speakers
Top Middle Speakers
Top Rear Speakers
Height Speakers;
Ceiling Speakers
These are types of height speakers. Furthermore, by
installing height speakers, you can select the Dolby
Atmos listening mode, which realizes the most up-to-date
3D sound including overhead sounds, when the input
format is Dolby Atmos.
Fit top front speakers on the ceiling forward of the seating
position, top middle speakers on the ceiling directly above
the seating position, and top rear speakers on the ceiling
behind the seating position. The distance between each
pair should match the distance between the two front
speakers. Note that with height speakers you can install
up to two sets; Height 1 Speaker and Height 2 Speaker.
0Dolby Laboratories recommends placing this type of
height speakers to obtain the best Dolby Atmos effect.
Go To "Hookup" (
Ä
P9)
SN29402434A_DRC-R1_BAS_En_1703XX.book 5 ページ ２０１７年３月１４日 火曜日 午後７時２６分
6
> Before start > Hookup >Setup >Playback >PartNames
＊1
＊2
＊3
＊1: 22e〜30e, ＊2: 90e〜120e, ＊3: 135e〜150e
9:
Height Speakers
$
$
$
Dolby Enabled Speakers (Front)
Dolby Enabled Speakers (Surround)
Dolby Enabled Speakers (Surround Back)
Height Speakers;
Dolby Enabled Speakers
(Dolby Speakers)
These are types of height speakers. Dolby enabled
speakers are special speakers designed to face the
ceiling so that sound is heard after bouncing off the ceiling
so that sound appears to be coming from overhead.
Furthermore, by installing height speakers, you can select
the Dolby Atmos listening mode, which realizes the most
up-to-date 3D sound including overhead sounds, when
the input format is Dolby Atmos.
Place them either above the front speakers or above the
surround speakers or surround back speakers. Note that
with height speakers you can install up to two sets; Height
1 Speaker and Height 2 Speaker.
Go To "Hookup" (
Ä
P9)
SN29402434A_DRC-R1_BAS_En_1703XX.book 6 ページ ２０１７年３月１４日 火曜日 午後７時２６分
7
> Before start > Hookup >Setup >Playback >PartNames
＊1
＊2
＊3
＊1: 22e〜30e, ＊2: 90e〜120e, ＊3: 135e〜150e
12
Front Speakers (Bi-Amping)
Bi-Amping the Speakers
It is possible to connect front speakers supporting Bi-
Amping to improve quality of the bass and treble. The
effects and placements for speakers are the same as for a
system that doesn't use Bi-Amping speakers.
Go To "Hookup" (
Ä
P11)
SN29402434A_DRC-R1_BAS_En_1703XX.book 7 ページ ２０１７年３月１４日 火曜日 午後７時２６分
8
> Before start > Hookup >Setup >Playback >PartNames
Speaker combinations
In any of the combinations, up to two powered subwoofers can be connected.
Points to note with speaker combinations
＊If front speakers are to be Bi-Amping connected, height speakers need to be connected to the HEIGHT
2 jacks.
HEIGHT 1/HEIGHT 2
When connecting 2 sets of height speakers, the height speaker combinations you can choose are as follows.
– Height 1 Speaker: Top Middle, Height 2 Speaker: Rear High
– Height 1 Speaker: Front High, Height 2 Speaker: One of Rear High/Top Middle/Top Rear/Dolby Enabled
Speaker (Surround)/Dolby Enabled Speaker (Surround Back)
– Height 1 Speaker: Top Front or Dolby Enabled Speaker (Front), Height 2 Speaker: One of Rear High/Top
Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back)
When connecting only one set of height speakers, select one type of height speakers from the types
available.
Speaker Channels FRONT CENTER SURROUND SURROUND
BACK HEIGHT 1 HEIGHT 2 Bi-AMP
2.1 ch
3.1 ch
4.1 ch
5.1 ch
6.1 ch
7.1 ch
2.1.2 ch
＊
3.1.2 ch
＊
4.1.2 ch
＊
5.1.2 ch
＊
6.1.2 ch
＊
7.1.2 ch
＊
4.1.4 ch
5.1.4 ch
6.1.4 ch
7.1.4 ch
SN29402434A_DRC-R1_BAS_En_1703XX.book 8 ページ ２０１７年３月１４日 火曜日 午後７時２６分
9
> Before start > Hookup >Setup >Playback >PartNames
Step2: Connecting Speakers via a Power Amplifier
2
1
ᴧᴧ
Subwoofer with built-in
amplifier
Power amplifier
1 Analog audio cable, 2 Subwoofer cable
PRE OUT (RCA) Jacks
Use an analog audio cable to connect the power amplifier
to the PRE OUT (RCA) jacks on this unit. For details on
how to connect the speakers and the power amplifier,
refer to the instruction manual of the power amplifier.
0If your subwoofer does not have a built-in amplifier,
connect via a power amplifier.
0Set the crossover frequency, speaker distance and
other settings on this unit.
＊Depending on the combination of speakers, you may need to
connect to other jacks. See "Points to note with speaker
combinations" (ÄP8) for details.
SN29402434A_DRC-R1_BAS_En_1703XX.book 9 ページ ２０１７年３月１４日 火曜日 午後７時２６分
10
> Before start > Hookup >Setup >Playback >PartNames
1
ᴧᴧ
Subwoofer with
built-in amplifier
Power amplifier
1 XLR balanced cable
PRE OUT (XLR) Jacks
Use a balanced XLR cable to connect the powered
amplifier to the PRE OUT (XLR) jacks on this unit. For
details on how to connect the speakers and the amplifier,
refer to the instruction manual of the power amplifier.
0If your subwoofer does not have a built-in amplifier,
connect via a power amplifier.
0Set the crossover frequency, speaker distance and
other settings on this unit.
＊Depending on the combination of speakers, you may need to
connect to other jacks. See "Points to note with speaker
combinations" (ÄP8) for details.
SN29402434A_DRC-R1_BAS_En_1703XX.book 10 ページ ２０１７年３月１４日 火曜日 午後７時２６分
Inhaltsverzeichnis
Andere Integra Controller Handbücher
Integra
Integra DHC-9.9 Bedienungsanleitung
Integra
Integra DHC-80.3 Bedienungsanleitung
Integra
Integra Xmart FUTURA-1000 Bedienungsanleitung
Integra
Integra PIPETBOY acu 2 Bedienungsanleitung
Integra
Integra PIPETBOY acu 2 Bedienungsanleitung
Integra
Integra DTC-9.8 Bedienungsanleitung
Integra
Integra WEIGH-TRAX Bedienungsanleitung
Integra
Integra DHC-80.2 Bedienungsanleitung
Integra
Integra DHC-40.2 Bedienungsanleitung
Integra
Integra Integra Research RDC-7.1 Bedienungsanleitung
