Intel Quark SoC X1000 Bedienungsanleitung

Order Number: 329687-007US

Intel®Quark™SoC X1000

Board Support Package (BSP)

Build and Software User Guide

Release: 1.0.1

16 June 2014

Contents

Intel®Quark™ SoC X1000

BSP Build and Software User Guide

2 Order Number: 329687-007US

Contents

1About this document .........................................................................................4

Part 1 Building the BSP software .............................................................................................5

2Before you begin ..............................................................................................5

3Downloading software .......................................................................................7

4Building the EDKII firmware ...............................................................................8

4.1 Dependencies ........................................................................................8

4.2 Pre build setup.......................................................................................8

4.2.1 Performing pre build steps in a Linux/gcc build environment ............9

4.2.2 Performing pre build steps in a Windows build environment .............9

4.3 Building all the EDKII Firmware validated build configurations [Linux build

environment only] ................................................................................10

4.4 Building a single EDKII Firmware build configuration .................................11

4.5 EDKII firmware build standalone output files ............................................12

5Building the GRUB OS loader [Linux build environment only].................................13

6Creating a file system and building the kernel using Yocto

[Linux build environment only] .........................................................................15

6.1 Applying a custom patch to the Linux kernel using Yocto (optional) .............17

7Building the Linux* cross compile toolchain using Yocto [Linux build environment only]18

8Creating a flash image for the board [Linux build environment only].......................20

8.1 Using the SPI Flash Tools ......................................................................20

9Patching flash binary files using platform data file................................................22

10 Programming flash on the board using serial interface ..........................................24

10.1 Programming flash using UEFI shell ........................................................24

10.2 Programming flash using Linux* run-time system .....................................27

11 Programming flash on the board using DediProg..................................................28

12 Booting the board from SD card ........................................................................29

Part 2 Using the BSP Software..............................................................................................31

13 Capsule update...............................................................................................31

14 Capsule recovery ............................................................................................32

15 Signing files (secure SKU only) [Linux build environment only] ..............................33

16 Enabling the OpenOCD debugger ......................................................................35

Appendix A Related documents..........................................................................................36

Contents

Intel®Quark™ SoC X1000

BSP Build and Software User Guide

Order Number: 329687-007US 3

Revision History .................................................................................................................37

Legal Disclaimers................................................................................................................38

About this document

Intel®Quark™ SoC X1000

BSP Build and Software User Guide

4 Order Number: 329687-007US

1About this document

This document, the Intel®Quark™SoC X1000 Board Support Package (BSP) Build and

Software User Guide, is divided into two major sections:

Part 1 Building the BSP Software contains instructions for installing and

configuring the Intel®Quark™SoC X1000 Board Support Package sources.

Part 2 Using the BSP Software provides information on BSP software features

and functionality.

Use this document to create an image to boot on your Quark-based board, and to

learn more about BSP software features.

The intended audience for this document are hardware/software engineers with

experience in developing embedded applications.

This software release supports the following software and hardware:

Board Support Package Sources for Intel®Quark™ SoC X1000 v1.0.0

Intel®Galileo Customer Reference Board (CRB) (Fab D with blue PCB)

Kips Bay Customer Reference Board (CRB) (Fab C with green PCB)

Intel®Quark™ SoC X1000 Industrial/Energy Reference Design (Cross Hill)

Intel®Quark™ SoC X1000 Transportation Reference Design (Clanton Hill)

Before you begin

Intel®Quark™ SoC X1000

BSP Build and Software User Guide

Order Number: 329687-007US 5

Part 1 Building the BSP software

This section contains the following topics:

Before you begin

Downloading software

Building the EDKII firmware

Building the GRUB OS loader [Linux build environment only]

Creating a file system and building the kernel using Yocto [Linux build environment only]

Building the Linux* cross compile toolchain using Yocto [Linux build environment only]

Creating a flash image for the board [Linux build environment only]

Patching flash binary files using platform data file

Programming flash on the board using serial interface

Programming flash on the board using DediProg

Booting the board from SD card

2Before you begin

Before you begin:

You need a host PC running either:

- Linux*; Intel recommends a 64-bit Linux system

- Microsoft* Windows* 7, x64

You need an internet connection to download third party sources.

The build process may require as much as 30 GB of free disk space.

To program the board you can use:

A serial interface using the UEFI shell or Linux* run-time (see Section 10)

A DediProg* SF100 SPI Flash Programmer (or equivalent) and the associated

flashing software (see Section 11)

An Intel®Galileo IDE (Galileo board only; see the Intel®Galileo Board Getting

Started Guide for details)

Note: Remove all previous versions of the software before installing the current version.

Individual components require very different environments (compiler options and

others). To avoid cross-pollution, the commands in each section below must

be run in a new command line window every time.

Before you begin

Intel®Quark™ SoC X1000

BSP Build and Software User Guide

6 Order Number: 329687-007US

Note: If the commands fail or timeout, it may be due to your proxy settings. Contact your

network administrator. You may find answers here:

https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy

This release has been tested with Windows* 7, 64-bit and Debian* Linux* 7.0

(Wheezy), but will work with most other Linux distributions.

Linux builds have been validated on 64-bit Linux systems and may need additional

steps for operation on 32-bit systems.

Downloading software

Intel®Quark™ SoC X1000

BSP Build and Software User Guide

Order Number: 329687-007US 7

3Downloading software

Download the BSP sources zip file from the following location:

https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23197

Note: If you are using an Intel®Quark™ Reference Design board, see your Intel

representative for the appropriate software download URL.

This release is comprised of:

Board Support Package (BSP) sources:

Board_Support_Package_Sources_for_Intel_Quark_v1.0.1.7z (2.6 MB)

For customers using the Clanton Hill FFRD, additional CAN software must be

downloaded from Intel Business Link (IBL). See your Intel representative for the URL.

The CAN package comprises:

•Fujitsu CAN Firmware:

CAN_Firmware_for_Intel_Quark_v1.0.1.zip (36 kB)

If building on a Debian host PC, use the Debian-provided meta package called build-

essential that installs a number of compiler tools and libraries. Install the meta

package and the other packages listed in the command below before continuing:

# sudo apt-get install build-essential gcc-multilib vim-common

Building the EDKII firmware

Intel®Quark™ SoC X1000

BSP Build and Software User Guide

8 Order Number: 329687-007US

4Building the EDKII firmware

You need to build the open source EDKII firmware for the Intel®Quark™ SoC.

Additional details may be found here:

www.tianocore.sourceforge.net

http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=Getting_Started

_with_EDK_II

4.1 Dependencies

Linux* build environment dependencies:

Python 2.6 or 2.7 (Python 3.x not supported)

GCC and G++ (tested with GCC 4.3 and GCC 4.6)

subversion client

uuid-dev

iasl (https://www.acpica.org/downloads/linux)

Note: An ACPI5.0 compatible version is required.

Windows* build environment dependencies:

Python 2.6 or 2.7 (Python 3.x not supported)

Microsoft* Visual Studio* 2008 Professional.

The Intel®Quark™ SoC EDKII build is validated with the Win7 x64 /

VS2008x86 option shown in

http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=Windows_syste

ms_ToolChain_Matrix

In addition, the quarkbuild.bat below enforces the x86 postfix onto the Visual

Studio* option for building under x64 Windows.

TortoiseSVN (1.4.2.8580 or later) installed with optional SVN command line tools.

iASL Windows binaries (https://www.acpica.org/downloads/binary-tools)

Note: An ACPI5.0 compatible version is required.

4.2 Pre build setup

The following steps are done once to prepare the EDKII workspace directory with the

required source code before commencing the actual firmware build.

1. Create the EDKII workspace directory and extract the contents of the Intel®

Quark™ SoC EDKII BSP into this directory. The file will have the name

Quark_EDKII_<version>.tar.gz. After the contents have been extracted the

Building the EDKII firmware

Intel®Quark™ SoC X1000

BSP Build and Software User Guide

Order Number: 329687-007US 9

files quarkbuild.sh and quarkbuild.bat should be in the root of the created

workspace directory.

2. Fetch the upstream core EDKII packages using svn_setup.py and the SVN

command line tool.

3. Optionally, if OpenSSL is required by the build configuration in Section 4.3 or

Section 4.4 following, then perform the steps in the

CryptoPkg/Library/OpensslLib/Patch-HOWTO.txt file.

4.2.1 Performing pre build steps in a Linux/gcc build

environment

Open a new terminal session and enter the following commands:

# sudo apt-get install build-essential uuid-dev iasl subversion

# tar -xvf Quark_EDKII_*.tar.gz

# cd Quark_EDKII*

# ./svn_setup.py

# svn update

4.2.2 Performing pre build steps in a Windows build

environment

Use a preferred tool to extract the Quark_EDKII_*.tar.gz to a user created EDKII

Workspace directory and run the cmd.exe Windows command. Then, issue the

following commands:

>cd %USER_SELECTED_EDKII_WORKSPACE_DIR%

>.\svn_setup.py

>svn update

Note: The svn update command can take a few minutes to complete depending on the

speed of your internet connection.

Note: If these commands fail, it may be due to your proxy settings. Contact your network

administrator. You may find answers about proxy settings here:

https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy

Note: The examples above do not show the optional OpenSSL pre build step described in the

CryptoPkg/Library/OpensslLib/Patch-HOWTO.txt file.

Building the EDKII firmware

Intel®Quark™ SoC X1000

BSP Build and Software User Guide

10 Order Number: 329687-007US

4.3 Building all the EDKII Firmware validated build

configurations [Linux build environment only]

This section is only supported in Linux Build environments. The buildallconfigs.sh

file is used to build all the validated EDKII build configurations. Open a terminal

window and cd to the Quark_EDKII* directory created in Section 4.2.1 above.

The script has the following options:

buildallconfigs.sh [GCC43 | GCC44 | GCC45 | GCC46 | GCC47] [PlatformName]

GCC4x GCC flags used for this build. Set to the version of GCC

you have installed.

Note: Validated with GCC43; tested on GCC46.

[PlatformName] Name of the platform package you want to build.

Example usage:

Create a build for an Intel® Quark™ SoC platform based on GCC version 4.6:

./buildallconfigs.sh GCC46 QuarkPlatform

Note: Ensure the selected version of GCC matches the one installed on the system by

running the gcc --version command.

The build output can be found in the following directories:

Build/QuarkPlatform/<Config>/<Target>_<Tools>/FV/FlashModules/

Contains EDKII binary modules

Build/QuarkPlatform/<Config>/<Target>_<Tools>/FV/Applications/

Contains UEFI shell applications, including CapsuleApp.efi

Where:

<Config> = PLAIN | SECURE

<Target> = DEBUG | RELEASE

<Tools> = GCC43 | GCC44 | GCC45 | GCC46 | GCC47

In Section 8 you will run a script that creates a symbolic link to the directory where

the EDK binaries are placed.

Andere Handbücher für Quark SoC X1000

Inhaltsverzeichnis

Andere Intel Computerhardware Handbücher

Intel

Intel FCPGA2 - Processor - 1 x Pentium 4 2.66 GHz Bedienungsanleitung

Intel

Intel RS2BL040 - Raid Controller Installationshandbuch

Intel

Intel 82496 CACHE CONTROLLER Bedienungsanleitung

Intel

Intel core i5 X series Bedienungsanleitung

Intel

Intel Pentium III Processor 512K Leitfaden

Intel

Intel ECB-862 Series Bedienungsanleitung

Intel

Intel Atom N2800 Bedienungsanleitung

Intel

Intel U3-1L Bedienungsanleitung

Intel

Intel SRCSATAWB - RAID Controller Installationshandbuch

Intel

Intel E5420 - CPU XEON QUAD CORE 2.50GHZ FSB1333MHZ 12M LGA771 HALOGEN FREE... Bedienungsanleitung

Intel

Intel SL7PG - Xeon 3.4 GHz/800MHz/1MB Cache CPU... Bedienungs- und Sicherheitshinweise

Intel

Intel Quark SoC X1000 Bedienungsanleitung

Intel

Intel E2160 - Cpu Pentium Dual-Core 1.80Ghz Fsb800Mhz 1M Lga775... Leitfaden

Intel

Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - VOLUME 2... Bedienungsanleitung

Intel

Intel TS13X Bedienungsanleitung

Intel

Intel Q9450 - Core 2 Quad Quad-Core Processor Leitfaden

Intel

Intel Xeon 3500 Series Bedienungsanleitung

Intel

Intel SOM-4486 ETX Module Bedienungsanleitung

Intel

Intel SRCZCRX - RAID Controller Storage Installationshandbuch

Intel

Intel D975XBX Bedienungsanleitung

Intel

Intel BX80616I3540 Leitfaden

Intel

Intel Xeon X3380 Referenzhandbuch

Intel

Intel ETHEREXPRESS PRO/100 Bedienungsanleitung

Intel

Intel SC5300AF2 - Server Platform - 0 MB RAM Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung