Intel 1000SX Bedienungsanleitung

1000SX Module and

1000LX Module

for 500 Series Switches

User Guide

715236-001

71523801.p65 27-10-98, 10:291

Get other manuals https://www.bkmanuals.com

GB2.book : GB2.fro i Tue Oct 27 13:01:06 1998

1000SX Module and

1000LX Module

for 500 Series Switches

User Guide

715236-001

Get other manuals https://www.bkmanuals.com

GB2.book : GB2.fro ii Tue Oct 27 13:01:06 1998

Year 2000 capable

An Intel product, when used in accordance with associated documentation, is “Year 2000 Capable” when, upon installation, it ac-

curately stores, displays, processes, provides, and/or receives data from, into, and between the twentieth and twenty-first centuries,

including leap year calculations, provided that all other technology used in combination with said product properly exchanges date

data with it.

Intel Corporation, 5200 NE Elam Young Parkway, Hillsboro, OR 97124-6497

Intel Corporation assumes no responsibility for errors or omissions in this manual. Nor does Intel make any commitment to up-

date the information contained herein.

* Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners’

benefit, without intent to infringe.

First edition October 1998 715236-001

Get other manuals https://www.bkmanuals.com

GB2.book : GB201 1 Tue Oct 27 13:01:06 1998

1Quick Start

Warning for 1000SX This product contains fiber-optic ports. For Optical Safety,

never look directly at the fiber TX laser port and fiber cable ends

when they are powered-up.

Warning for 1000LX This product contains fiber-optic ports. For Optical Safety,

never look directly at the fiber TX laser port and fiber cable ends

when they are powered-up.

CLASS 1

LASER PRODUCT

CLASS 1

LASER PRODUCT

Peak Power 3mW, Time Base 100s

1261nm < λ< 1360nm

IEC 825–2:1993

Get other manuals https://www.bkmanuals.com

GB2.book : GB201 2 Tue Oct 27 13:01:06 1998

C H A P T E R 1 Quick Start

Naming in this Quick Start This Quick Start covers two products:

•1000SX Module for 500 Series Switches

•1000LX Module for 500 Series Switches

To differentiate these modules from other modules in the text, we

shall refer to both these modules as ‘1000Base Module’.

Installing the module Follow these instructions to install a 1000Base Module in your Intel®

Express 500 Series Switch:

Warning These modules are not designed to be installed in, or

removed from, the switch while it is in operation. You

must turn off the switch before installing or removing

the module. Failure to do this may result in the module

not being able to communicate with the switch.

1Ensure that your working area is static-free before opening the

bag containing the module.

2Turn off the switch.

0887

Electrostatic Sensitive Device

Do not handle the printed circuit board unless the working area is static-free!

Get other manuals https://www.bkmanuals.com

GB2.book : GB201 3 Tue Oct 27 13:01:06 1998

C H A P T E R 1 Quick Start

3Remove the plate covering expansion slot A, unless the switch

is in or to be used in a stack with redundancy.

Note For a stack with redundancy, install the module on the same

side of the switch as the Matrix Module it is to be connected

to. When possible, do not install the module in the same

switch as a Matrix Module. This prevents having a single

point of failure.

When using this module in stand-alone mode, do not install

it in the same switch as a Stack Interface Module, Matrix

Module or another 1000Base Module in stack mode.

4Insert the 1000Base Module into the slot. Place your thumbs

just beneath the screws on the front panel of the module and

push it in until it clicks. Secure the module using the retaining

screws.

5Turn on the switch.

1704

Blink

Solid

Off

Activity

Link

100Mbps

10Mbps

Collision

Disabled

Fullduplex

Halfduplex

LEDs

Green

Orange

PortStatus

TX TX TX TX TX TX TX

RXRX RX RX RX RX RX RX

123 87654

SlotB

SlotA

9600-8-N-1

Console

Intel Express

550F Switch

Power

Status

Temperature

RPS Reset

Blink

Solid

Off

Activity

Link

100Mbps

10Mbps

Collision

Disabled

Fullduplex

Halfduplex

LEDs

Green

Orange

PortStatus

TX TX TX TX TX TX TX

RXRX RX RX RX RX RX RX

123 87654

SlotB

SlotA

9600-8-N-1

Console

Intel Express

550F Switch

Power

Status

Temperature

RPS Reset

1715

1000BASE-SX SIM

CLASS1 LASER PRODUCT

Get other manuals https://www.bkmanuals.com

GB2.book : GB201 4 Tue Oct 27 13:01:06 1998

C H A P T E R 1 Quick Start

Conﬁgure and cable the

module Configure the module using Intel Device View and cable up using

stacking cables in the Stack Interface Module sockets and a fiber op-

tic cable with SC connectors in the RX and TX sockets. Verify the

links using the LEDs. For full configuration and cabling details, see

Chapter 3.

Get other manuals https://www.bkmanuals.com

GB2.book : GB202 5 Tue Oct 27 13:01:06 1998

1000SX and 1000LX

Modules

Naming in this User Guide This User Guide covers two products:

•1000SX Module for 500 Series Switches

•1000LX Module for 500 Series Switches

To differentiate these modules from other modules in the text, we

shall refer to both these modules as ‘1000Base Module’.

When to use the module The 1000Base Module can only be used with Intel 500 Series Switch-

es. It provides a high-speed link between the switch or group of

switches containing this module and another device, switch or group

of switches.

Get other manuals https://www.bkmanuals.com

GB2.book : GB202 6 Tue Oct 27 13:01:06 1998

C H A P T E R 21000SX and 1000LX Modules

Introduction

Two modes This module operates in two modes.

•Stack mode (default setting):

Used when the switch containing this module is connected to a

group of switches (or stack) via a Matrix Module. The two Stack

Interface Module (SIM) connectors enable the module to be inte-

grated into the group of switches (even a stack with redun-

dancy). The fiber optic SC connector provides the high-speed

link between the group of switches (or stack) and another stack

or device.

•Stand-alone mode:

Used to provide a high-speed link between the switch and

another device via the fiber optic SC connector.

Installing the module To install the module, follow the instructions in Chapter 1.

View of the 1000SX front

panel The front panel of the 1000SX Module is shown below:

View of the 1000LX front

panel The front panel of the 1000LX Module is shown below:

1711

1000Base-SX Stack Interface Module

CLASS 1 LASER PRODUCT

1000SX Module for 500 Series Switches

1744

1000Base-LX Stack Interface Module

CLASS 1 LASER PRODUCT

1000LX Module for 500 Series Switches

Get other manuals https://www.bkmanuals.com

GB2.book : GB202 7 Tue Oct 27 13:01:06 1998

C H A P T E R 21000SX and 1000LX Modules

Module LEDs

Understanding the LEDs The 1000Base Module has three connectors. Each connector has two

LED indicators:

Note The green LED for the 1000Base-SX/1000Base-LX SIM

connector remains solid when there is a link with data activ-

ity. Data activity on this link is shown by the blinking, green

LED next to the SC connector (RX and TX sockets).

Status Indicates

No lights Port enabled, no link.

Green, solid Link.

Green, blinking Link with data trafﬁc.

Green, solid and

Orange, solid Port disabled by a fault.

Orange, solid Port disabled by management; backup in

redundancy (no redundancy with 510T).

Get other manuals https://www.bkmanuals.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Intel Steuereinheit Handbücher

Intel

Intel Stratix 10 Bedienungsanleitung

Intel

Intel Remote Management Module 3 Bedienungsanleitung

Intel

Intel SBCEFCSW Bedienungsanleitung

Intel

Intel AXXTPME3 Installationshandbuch

Intel

Intel RealSense ID Solution F450 Bedienungsanleitung

Intel

Intel ESM-APLC Bedienungsanleitung

Intel

Intel RMT3PB080 Einrichtungshandbuch

Intel

Intel AXXRMFBU2 Bedienungsanleitung

Intel

Intel RMS25KB080 Einrichtungshandbuch

Intel

Intel FM5224 Bedienungsanleitung

Intel

Intel AXXTPME5 Installationshandbuch

Intel

Intel Compute Card Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung