Intel Desktop Board D845GLVA Bedienungsanleitung

Intel®Desktop Board

D845GLVA Quick Reference

This guide is written for technically qualified personnel with experience

installing and configuring desktop board.

Before You Begin

Warning and Caution ........................................................................................... 3

Safety and Regulatory Notice.............................................................................. 3

Desktop Board Components.............................................................. 4

Supported Components........................................................................ 6

Installation Steps

1Installing the I/O Shield............................................................................... 7

2Installing the Desktop Board ....................................................................... 7

3Installing the Processor................................................................................ 8

4Installing Memory Modules ........................................................................ 9

5Attaching IDE Drives ................................................................................ 10

6Connecting Internal Headers ..................................................................... 11

7Connecting Fans and Power Cables .......................................................... 14

Using the BIOS Setup Program ...................................................... 15

Setting the BIOS Configuration Jumper Block...................... 15

Troubleshooting....................................................................................... 16

Customer Support Links..................................................................... 17

Items on the Intel®Express Installer CD-ROM

• Product warranty

• Intel Express Installer

• Intel®Desktop Board D845GLVA Product Guide

• Software utilities and drivers

• Software license agreement

• Readme file

Part Number: C30685-001

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH

INTEL®PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR

OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY

THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND

CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO

LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR

IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL

PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS

FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF

ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

INTEL PRODUCTS ARE NOT INTENDED FOR USE IN MEDICAL, LIFE

SAVING, OR LIFE SUSTAINING APPLICATIONS. INTEL MAY MAKE

CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY

TIME, WITHOUT NOTICE.

The Desktop Board D845GLVA may contain design defects or errors known as

errata which may cause the product to deviate from published specifications.

Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest

specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this

document, or other Intel literature, may be obtained from Intel Corporation by

going to the World Wide Web site at: http://www.intel.com or by calling

1-800-548-4725.

Intel, Pentium, and Celeron are trademarks or registered trademarks of Intel

Corporation or its subsidiaries in the United States and other countries.

*Other names and brands may be claimed as the property of others.

2 Intel Desktop Board D845GLVA Quick Reference

Before You Begin

Warning and Caution

WARNING

Disconnect the desktop board's power supply from its AC power

source before you connect or disconnect cables, or install or remove

any board components. Failure to do this can result in personal

injury or equipment damage. Some circuitry on the desktop board

can continue to operate even though the front panel power switch

is off.

CAUTION

Electrostatic discharge (ESD) can damage desktop board components.

Install the board at an ESD-controlled workstation. If such a workstation is

not available, wear an antistatic wrist strap or touch the surface of the

antistatic package before handling the board.

CAUTION

Many of the midboard and front panel connectors provide operating

voltage (+5 V DC and +12 V DC, for example) to devices inside the

computer chassis, such as fans and internal peripherals. These

connectors are not overcurrent protected. Do not use these connectors for

powering devices external to the computer chassis. A fault in the load

presented by the external devices could cause damage to the computer,

the interconnecting cables, and the external devices themselves.

Safety and Regulatory Notice

See the Intel Desktop Board D845GLVA Product Guide for all applicable

regulatory compliance statements, product certification markings, and safety and

electromagnetic compatibility (EMC) standards and regulations the desktop

board is compliant with.

Replacement battery warning label provided: Place the label inside the chassis

in an easy-to-see location near the battery but not on the board itself.

Intended uses: This product was evaluated as information technology

equipment (ITE) for home or office use when installed into an appropriate

computer chassis. Other end uses or locations may require further evaluation.

Intel Desktop Board D845GLVA Quick Reference 3

Desktop Board Components

OM15853

Reset

HD LED

Power LED

No Connection

USB 2.0

Devices

Line

Figure 1. Desktop Board Components

continued

4 Intel Desktop Board D845GLVA Quick Reference

Desktop Board Components (continued)

A Front panel audio header L Primary IDE connector

B CD-ROM connector (ATAPI) M Speaker

C 12 V processor core voltage

connector

N Battery

D Rear chassis fan header O Power LED header

E Intel®82845GL (GMCH) P Front chassis fan header

F Processor socket Q Chassis intrusion header

G Processor fan header R BIOS configuration jumper

H DIMM sockets S Front panel header

I Main power connector T USB 2.0 header

J Diskette drive connector U Intel®82801DB (ICH4)

K Secondary IDE connector V PCI bus add-in card connectors

CAUTION

Failure to use an ATX12V or SFX-12V power supply, or not connecting the

additional power supply lead to Desktop Board D845GLVA may result in

damage to the desktop board and/or power supply.

For more information on the ATX12V and SFX -12V power supply, refer to

the Intel Desktop Board D845GLVA Product Guide on the Intel Express

Installer CD-ROM.

Intel Desktop Board D845GLVA Quick Reference 5

Supported Components

Processors

Desktop Board D845GLVA supports the following processors:

Type

Designation

FSB1

Frequency

L2 Cache

Intel®Pentium®

4 processor

2.60, 2.50, 2.40, 2.20, 2A,

1.80A, and 1.60A GHz

400 MHz 512 KB

Intel®Celeron®

processor

2.20, 2.0, 1.80, and 1.70 GHz 400 MHz 128 KB

1Front side bus

For the latest information on processors supported by Desktop Board

D845GLVA, refer to the Intel World Wide Web site at:

http://support.intel.com/support/motherboards/desktop/

Memory Module Requirements

Desktop Board D845GLVA supports system memory as defined below:

• Up to two 184-pin Double Data Rate (DDR) 266/200 SDRAM DIMMs

with gold-plated contacts

• 2.5 V memory only

• Memory configurations up to 2.0 GB using 512 Mbit technology

• Serial Presence Detect (SPD)

• Unbuffered, non-ECC RAM (registered memory is not supported)

✏NOTES

Desktop Board D845GLVA has been designed to support DIMMs based

on 512 Mbit technology up to 2 GB, but this technology has not been

validated on the board.

All memory components and DIMMs used with the desktop board must

comply with PC SDRAM specifications. These include the PC SDRAM

Specification (memory component specific) and the PC Unbuffered DIMM

Specification. To view or download these specifications, refer to this Intel

World Wide Web site:

http://www.intel.com/technology/memory/pcsdram/

For information about vendors that support these memory requirements,

refer to the Desktop Board D845GLVA link on the Intel World Wide Web

site at:

http://support.intel.com/support/motherboards/desktop/

6 Intel Desktop Board D845GLVA Quick Reference

Installation Steps

1 Installing the I/O Shield

The desktop board comes with an I/O shield. When installed in the chassis, the

shield blocks radio frequency transmissions, necessary to pass emissions (EMI)

certification testing, protects internal components from dust and foreign objects,

and promotes correct airflow within the chassis.

Install the I/O shield before installing the desktop board in the chassis. Place the

shield inside the chassis as shown in Figure 2. Press the shield into place so that

it fits tightly and securely. If the shield doesn’t fit, obtain a properly-sized

shield from the chassis supplier.

OM13621

Figure 2. I/O Shield

2 Installing the Desktop Board

CAUTION

Failure to use an ATX12V or SFX-12V power supply, or not connecting the

additional power supply lead to the Desktop Board D845GLVA may result

in damage to the desktop board and/or power supply.

For more information on the ATX12V and SFX-12V power supply, refer to

the Intel Desktop Board D845GLVA Product Guide on the Intel Express

Installer CD-ROM.

Refer to your chassis manual for specific instructions on installing and removing

the desktop board. Secure the desktop board to the chassis standoffs using the

screws.

Desktop Board D845GLVA is secured to the chassis with six screws. Refer to

Figure 1 on page 4 for the location of the mounting screw holes.

Intel Desktop Board D845GLVA Quick Reference 7

3 Installing the Processor

To install the processor, follow these steps (see Figure 3):

1. Observe the precautions in “Before You Begin” on page 3.

2. Lift the processor socket lever.

3. Install the processor so that the corner with the triangle marking (A) is

aligned with the corner where the lever is attached to the socket.

4. Lower the lever back to its original position.

OM12078

mPGA478B

Figure 3. Installing the Processor

5. The desktop board comes with an integrated processor heatsink retention

mechanism (RM). For instructions on how to install the processor fan

heatsink, refer to the boxed processor manual or the Intel customer support

World Wide Web site at:

http://support.intel.com/support/processors/pentium4/intnotes478.htm

8 Intel Desktop Board D845GLVA Quick Reference

4 Installing Memory Modules

CAUTION

Install memory in the DIMM sockets prior to installing a video card in PCI

slot 1 to avoid interference with the memory retention mechanism.

The two DIMM sockets on Desktop Board D845GLVA are arranged as banks 0

and 1, as shown in Figure 4. If installing a single DIMM, install it in bank 0.

To install DIMMs, follow these steps:

1. Observe the precautions in “Before You Begin” on page 3.

2. Remove the PCI card from PCI slot 1 if it interferes with the DIMM clips

from being easily opened and closed.

3. Align the small notch in the bottom edge of the DIMM with the key in the

socket.

4. When the DIMM is inserted, push down on the top edge of the DIMM until

the retaining clips snap into place. Make sure the clips are firmly in place.

OM15854

Figure 4. Installing a Memory Module

Intel Desktop Board D845GLVA Quick Reference 9

5 Attaching IDE Drives

The Intel®boxed desktop board package includes an IDE cable. The cable can

connect two drives to the desktop board. The cable supports the ATA-66/100

(40-contact, 80-conductor) transfer protocol and is backward compatible with

drives using slower IDE transfer protocols.

The cable will work correctly only when oriented as shown in Figure 5. For

correct cable function:

1. Observe the precautions in “Before You Begin” on page 3.

2. Attach the cable end with the single blue connector (A) to the desktop

board.

3. Attach the cable end with the two closely spaced black and gray connectors

(B) to the drives.

OM15856

Figure 5. Connecting the IDE Cable

10 Intel Desktop Board D845GLVA Quick Reference

Andere Handbücher für Desktop Board D845GLVA

Inhaltsverzeichnis

Andere Intel Hauptplatine Handbücher

Intel

Intel BOXD845GVSR Bedienungsanleitung

Intel

Intel D945PAW Bedienungsanleitung

Intel

Intel i845E Bedienungsanleitung

Intel

Intel Desktop Board D915PCM Bedienungsanleitung

Intel

Intel Desktop Board D850EMV2 Bedienungsanleitung

Intel

Intel i865-G Bedienungsanleitung

Intel

Intel DP43BF Bedienungsanleitung

Intel

Intel D2500HN Referenzhandbuch

Intel

Intel DG41KR Bedienungsanleitung

Intel

Intel DG43RK Bedienungsanleitung

Intel

Intel BLKDG41RQ - Bulk Single Uatx G41 Exp Chip Bedienungsanleitung

Intel

Intel DB65AL Bedienungsanleitung

Intel

Intel DZ68PL Bedienungsanleitung

Intel

Intel D946GZIS - Desktop Board Motherboard Technisches Handbuch

Intel

Intel DG965MQ Bedienungsanleitung

Intel

Intel TE430VX Konfigurationshandbuch

Intel

Intel DH67CF Bedienungsanleitung

Intel

Intel BOXDG41MJ Bedienungsanleitung

Intel

Intel D915GLVG Bedienungsanleitung

Intel

Intel DG965MQ Bedienungsanleitung

Intel

Intel G41 Express Chipset Bedienungsanleitung

Intel

Intel D955XCS Bedienungsanleitung

Intel

Intel DG965MQ Bedienungsanleitung

Intel

Intel DX79TO Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung