Intel I440 LX Bedienungsanleitung

I440 LX CHIPSET

AT FORM FACTOR

MOTHER BOARD

USER'S MANUAL

( VER : 6LX2 )

This manual and the information contained herein are protected by

WARNING AND DISCLAIMER

This manual is designed to provide information about the

PENTIUM® II System Board. Every effort has been made to make

this manual as accurate as possible, but no warranty or fitness is

implied. All the information is provided on an 'as is' basis. The

author and his corresponding publishing company shall have neither

liability nor responsibility to any person or entity with respect to

any loss or damages arising from the information contained in this

manual or from the use of the System board that accompanies it.

Information contained in this manual is subject to change without

notice. The manufacturer of the System board will not be held

responsible for technical or editorial omissions made herein, nor

for the incidental or consequential damages resulting from its

furnishing, performance, functionality or use. Subsequent changes to

this manual will be incorporated into the next edition. We welcome

any suggestion regarding this manual or our computer products.

TRADEMARKS

All trademarks are the property of their respective owners.

TABLE OF CONTENTS

CHAPTER 1. INTRODUCTION 1

1-1 OVERVIEW 1

1-2 UNPACKING 1

1-3 QUICK REFERENCE FOR CD 2

SOFTWARE DRIVERS

1-4 SPECIFICATIONS 3

CHAPTER 2. INSTALLATION 4

2-1 LAYOUT REFERENCE 4

2-2 JUMPER SETTINGS 5

2-3 MEMORY INSTALLATION 7

2-4 ASSEMBLING PROCEDURE 8

CHAPTER 3. BIOS SETUP 10

3-1 AWARD BIOS CMOS SETUP 10

3-2 STANDARD CMOS SETUP 11

3-3 BIOS FEATURES SETUP 12

3-4 CHIPSET FEATURES SETUP 16

3-5 POWER MANAGEMENT SETUP 18

3-6 PNP/PCI CONFIGURATION SETU P 20

3-7 INTEGRATED PERIPHERALS 21

3-8 SUPERVISOR/USER PASSWORD 23

3-9 IDE HDD AUTO DETECTION 24

3-10 LOAD SETUP DEFAULTS 26

3-11 SAVE & EXIT SETUP 26

3-12 EXIT WITHOUT SAVING 26

3-13 I/O & MEMORY MAP 27

3-14 TIME & DMA CHANNELS MAP 29

3-15 INTERRUPT MAP 29

3-16 RTC & CMOS RAM MAP 30

Ver.6LX2

I440LX 1

CHAPTER 1: INTRODUCTION

THE I440 LX MAIN BOARD IS DESIGNED WITH INTEL® 82440LX

PCISET WHICH PROVIDES AN INTEGRATED IDE CONTROLLER

WITH TWO HIGH PERFORMANCE IDE INTERFACES FOR UP TO

FOUR IDE DEVICES ( HARD DEVICES , CD-ROM DEVICES , ETC ),

AND USB ( UNIVERSAL SERIAL BUS ) FEATURES ENHANCES

THE OVERALL PERFORMANCE ANDE EXTENSION FOR THIS

BOARD.

IT SUPPORTS INTEL PENTIUM® II CPUS FAMILY RUNNING AT

233-333 MHZ SPEED, CPU SUPPORTS INTERNAL 512K L2 CACHE

MEMORY IS IDEAL FOR MS-DOS, WINDOWS, WIN95, WINDOW

NT, NOVELL, OS/2, UNIX., SOFTWARES.

THE PERFORMANCE, SPEED AND EXTENSIBILITY OF I440LX

MAIN BOARD MAKE IT THE PERFECT CHOICE FOR BUILDING A

LAN SERVER, A HIGH-END WORKSTATION OR A MULTI-USER

SYSTEM.

THE MAIN BOARD PACKAGE CONTAINS:

* I440LX MAIN BOARD

* MANUAL

* CABLES

* DRIVER & UTILITY / CD

* RETENTION MODULES

IF ANY OF THESE ITEMS IS MISSING OR DAMAGED,CONTACT

THE DEALER FROM WHOM YOU PURCHASED. LEAVE THE

I440LX IN ITS ORIGINAL PACKING UNTIL YOU ARE READY TO

INSTALL IT.

1- 2 UNPACKING:

1-1 OVERVIEW

Ver.6LX2

I440LX 2

1.3 QUICK REFERENCE FOR CD SOFTWARE DRIVERS

THIS CD CONTAINS DRIVERS FOR I440LX, I430TX, VIA VP3 MAIN BOARDS,

SIS 6326 AND TRIDENT 9850 AGP VGA CARDS. THE DIRECTORIES ARE:

1. FLASH ROM: TO UPDATE ANY MAIN BOARD BIOS BY USING AWARD

BIOS.

A. READ «AWDFLASH. DOC» FIRSTLY.

B. MOVE ANY MEMORY MANAGEMENT (EMS) FILES LIKE EMM 386,

HIMEM…, FROM ROOT DIRECTORY.

C. EXCUTE «AWDFLASH. EXE» UNDER DOS, NOT WIN-95.

2. I430TX: DRIVERS FOR ANY I430TX- BASED AT/ATX MAIN BOARD

A. BMIDE FILES: PROVIDE DRIVERS FOR ULTRA DMA (33MB/SEC.)

MODE IDE HARD DISK. READ «README» FILE FIRSTLY & MOVE

ICON TO «SETUP» THEN SYSTEM WILL INSTALL THESE DRIVERS

AUTOMATICALLY. FILE «DEINSTBM» IS USED FOR RE-

INSTALLATION.

B. «PIIX4INF» FILE: WIN-95 DOESN’T SUPPORT TX-CHIP DRIVERS, SO

AFTER WIN95 INSTALLATION SYSTEM, IT WILL PROMPT «?» MARKS.

THIS FILE IS USED REBOOT SYSTEM TO COMPLETE.

3. I440LX: DRIVERS FOR I440LX MAIN BOARDS WITH THE SAME

PROCEDURE AS I430TX.

4. S-6326: DRIVERS FOR SIS 6326 AGP VGA CARD. PLEASE REFER TO

CHAPTER 3, 4, & 5 OF SIS 6326 AGPVGA «MANUAL.»

***NOTE: «ADI42» & «ET» DIRECTORIES ARE USED FOR CHINESE ET

SYSTEM ONLY.

5. T-9850: DRIVERS FOR TRIDENT 9850 AGP VGA CARD. PLEASE REFER TO

CHAPTER 3 OF «3D IMAGE 985» MANUAL.

6. VP3: DRIVERS FOR ANY VP3-BASED AT/ATX MAIN BOARD.

A. 586XIRQ: AFTER INSTALLING THIS DRIVER, USER CAN CHANGE IRQ

ADDRESS OF PCI DEVICE.

B. IDE FILES: TO SUPPORT ULTRA DMA (33MB/SEC.) , HARD DISK

DRIVER. MOVE ICON TO "SETUP» TO INSTALL THIS FILE.

C. OSR2VXD: TO SUPPORT AGP CARDS. SO FAR ONLY TRIDENT 9750 &

9850 ARE NEEDED.

D. VIAINF: TO ELIMINATE «?» MARKS IN WIN-95. USER NEEDS TO USE

«REMOVE» FUNCTION BAR TO MOVE «?» PCI BRIDGE LINE

FIRSTLY. THEN RUN «SETUP» UNDER VIAINF DIRECTORY TO

INSTALL THIS FILE.

7. VPX: DRIVERS FOR ANY VPX-BASED AT/ATX MOTHER BOARD MAIN

BOARD. THE PROCEDURE IS SIMILAR TO VP3 WITHOUT «OSR2VXD»

SINCE VPX DOESN’T SUPPORT AGP PORT.

Ver.6LX2

I440LX 3

1-4 SPECIFICATIONS

: 233 - 333 MHZ INTEL® PENTIUM® II CPU.

: 3 OF 168-PIN DIMM, WHICH ACCEPTS EITHER 5V

OR 3.3V. FOR SDRAM, THE MEMORY IS UP TO

384MB. FOR EDO RAM, THE MEMORY IS UP TO

768MB.

: 2 X ISA, 3 X PCI SLOTS AND 1X A.G.P. SLOT

: INTEL® I440 LX CHIPSET

INTEL® 82443LX PCI AND A.G.P CONTROLLER.

INTEL® 82371AB I/O BRIDGE

: NONE (CPU INTERNAL L2 CACHE 512K).

: AWARD® FULLPnP (PLUG & PLAY) BIOS.

: ON BOARD 2 x PCI IDE DEVICES , 1 x FDC , 2 x

SERIAL PORTS(16550 FAST COM),1x PARALLEL

PORT DEVICE /EPP/ECP, OPTIONAL USB

CONNECTOR, I.R. (INFRARED) CONNECTOR

: 22 CM x 22 CM.

: COMPLIED WITH APM (ADVANCED POWER

MANAGEMENT).

*LM78 SUPPORTS HARDWARE MONITORING

IS OPTIONAL.

CPU

MEMORY

EXP.SLOT

CHIPSET

CACHE

BIOS

I/O FUNCTION

BOARD SIZE

GREEN FUNCTION

SPECIAL FUNCTION

Ver.6LX2

I440LX 4

CHAPTER 2. INSTALLATION

2-1 LAYOUT REFERENCE

KEY-LOCK

SPEAKER

RESET

HD-LED

TB-LED

SMI

BIOS

JP5 FAN2

FAN1

RTC1

I/O

SLOT 1

JP4

I.R.

AT POWER

PS/2

MOUSE

USB

ATX POWER

FLOPPY

COM2/4

COM1/3

PRINTER

ISA2

ISA1

PCI 1

PCI 2

PCI 3

AGP SLOT

INTEL®

I440LX

INTEL®

82371AB

DIMMVSL

SECONDARY

PRIMARY

JP6

DIMM3

DIMM2

DIMM1

I/O

BUFFER

PW-LED

SW PWR

1 2

7 8

1 2

5 6

Ver.6LX2

I440LX 5

2-2 JUMPER SETTINGS

1. SETTING «CPU CLOCK RATIO«

Please modify «CPU Clock Ratio» in «3-4 Chipset Features Setup.» First,

go to «3-4 Chipset Features Setup» and set proper «CPU Clock Ratio.» Then,

go to «3-1 Award BIOS Setup» and save the change. The user does not have to

set jumpers.

2. RTC : BATTERY SELECTOR (BLACK JUMPER CAP)

NORMAL CLEAR CMOS

RTC 1-2 (DEFAULT) 2-3

NOTE: CUSTOMERS NEED TO CLEAR CMOS, THEN RECONFIGURE

IT IF FORGET PASSWORD FOR BIOS SETUP.

*CPU CLOCK RATIO

Press «+» or «



«to choose



CPU Clock Ratio



according to your CPU

frequency. The screen will show the following choices:

P-II 133 υ«2.0/133MHZ» P-II 166 υ«2.5/166MHZ»

P-II 200υ«3.0/200MHZ» P-II 233 υ«3.5/233MHZ»

P-II 266 υ«4.0/266MHZ» P-II 300υ«4.5/300MHZ «

P-II 333 υ«5.0/333MHZ»

Also note that wrong «CPU Clock Ratio» leads to wrong system setup.

*CLOCK TURBO MODE

If this item is modified to «ENABLED,» CPU BUS SPEED may increase

from 66MHZ to 75MHZ, but interface card for PCI SLOT must bear a higher

frequency over 33MHZ. Without the card, this functioned is not suggetsd to

be used.

Ver.6LX2

I440LX 6

3. SOFTPWR : ATX POWER SWITCH

The system power is controlled by a momentary switch (when "power switch

type" is set to momentary) connected to this lead. Pushing the button once

will turn on the system and pushing another time will turn off the system.

The system power LED shows the status of the system's power. This

connection does not have a function when a standard power

supply is used.

4. OTHER JUMPER SETTINGS AND CONNECTORS :

PRIMARY : PRIMARY IDE CONNECTOR

SECONDARY : SECONDARY IDE CONNECTOR

FLOPPY : FLOPPY DISK CONNECTOR

PRINTER : PARALLEL PORT CONNECTOR.

COM1/3 : SERIAL PORT 1 /PORT 3 CONNECTOR

COM2/4 : SERIAL PORT 2 /PORT4 CONNECTOR

MOUSE : PS/2 MOUSE CONNECTOR

KBD : AT KEYBOARD CONNECTOR

USB : USB (UNIVERSAL SERIAL BUS) CONNECTOR

J3 : SB-LINK

JP4 : IT SUPPORTS THE IC, «GL518M,» WHICH CAN

DETECT CPU TEMPERATURE, VOLTAGES AND FAN

SPEED, TOO. THIS IS AN OPTIONAL FUNCTION.

THE USER MAY CONTACT THE SUPPLIER FOR THIS

IF INTERESTED.

5. FAN1, FAN2 : CPU FAN CONNECTOR

CPU FAN PIN OUT

PIN1 SENSOR PIN2 +12V PIN3 GND

NOTE : USB (UNIVERSAL SERIAL BUS) AND IRCON CONNECTOR

ARE OPTIONAL.

6. DIMM VSL: DIMM VOLTAGE SELECTOR

DIMM VSL 3.3V DIMM 5V DIMM

1-2, 3-4 5-6, 7-8

Ver.6LX2

I440LX 7

7. I.R.1 : I.R. (INFRARED) CONNECTOR

I.R . CONNECTOR PIN OUT

PIN 1

RX PIN 2

GND PIN 3

TX PIN 4

+5V PIN 5

RXH PIN 6

VCC PIN 7

GND

NOTE : I.R.1 USES THE SAME I/O PORT AS COM2. THERE IS NO ANY

HARDWARE JUMPER SETTING FOR IRCON/COM2 ON THIS

MAIN BOARD BUT CUSTOMERS NEED TO SET PROPER BIOS

SETTING FOR "IRDA1.0","ASKIR" OR "standard"(DEFAULT)

UNDER "INFRA RED (IR) FUNCTION" OF "INTEGRATED

PERIPHERALS"

2-3 MEMORY INSTALLATION

THE USER CAN USE EITHER 5V DIMM OR 3V DIMM. ONLY SET THE

JUMPER, «DIMMSVL» TO «1-2, 3-4» FOR 3.3V DIMM AND «5-6, 7-8» FOR

5V. «DEFAULT» IS FOR 3.3V DIMM.

TOTAL DIMM1 DIMM2 DIMM3

8MBytes 8MB --- ---

16MBytes 8MB 8MB ---

24MBytes 8MB 8MB 8MB

32MBytes 8MB 8MB 16MB

32MBytes 16MB 16MB ---

32MBytes 32MB --- ---

40MBytes 16MB 16MB 8MB

48MBytes 16MB 16MB 16MB

64MBytes 64MB --- ---

64MBytes 32MB 32MB ---

96MBytes 32MB 32MB 32MB

128MBytes 64MB 64MB ---

128MBytes 128MB --- ---

192MBytes 64MB 64MB 64MB

256MBytes 128MB 128MB ---

384MBytes 128MB 128MB 128MB

Inhaltsverzeichnis

Andere Intel Hauptplatine Handbücher

Intel

Intel D915GLVG Bedienungsanleitung

Intel

Intel BLKD925XBCLK Bedienungsanleitung

Intel

Intel D410PT Bedienungsanleitung

Intel

Intel DH55TC Bedienungsanleitung

Intel

Intel XP-P41533E Bedienungsanleitung

Intel

Intel P35 Bedienungsanleitung

Intel

Intel EMB-H61A Bedienungsanleitung

Intel

Intel D815EGEWLU - P3 Socket 370 MicroATX... Bedienungsanleitung

Intel

Intel D510MO Handbuch

Intel

Intel BOXD845GVSR Bedienungsanleitung

Intel

Intel DG43RK Bedienungsanleitung

Intel

Intel D865PCK Bedienungsanleitung

Intel

Intel BLKDP55WG - P55 LG1156 MAX-16 GB DDR3 ATX... Konfigurationshandbuch

Intel

Intel 815TM5 Bedienungsanleitung

Intel

Intel MS-6112 Bedienungsanleitung

Intel

Intel D925XECV2 Bedienungsanleitung

Intel

Intel i848P Bedienungsanleitung

Intel

Intel D2550MUD2 Bedienungsanleitung

Intel

Intel D925XEBC2 Bedienungsanleitung

Intel

Intel DP67BA Bedienungsanleitung

Intel

Intel BLKD915GMHLK - LGA775 800FSB Dual DDR400 GIG Lan PCI Express mBTX... Konfigurationshandbuch

Intel

Intel D945PLNM Bedienungsanleitung

Intel

Intel Bay Trail Series Bedienungsanleitung

Intel

Intel DG41BI Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung