Intel IUP-200A Bedienungsanleitung

intel

iUP-200A/201 A

UNIVERSAL PROGRAMMER

USER’S GUIDE

*. m A.

Intel Corporation, 3065 Bowers A enue, Santa Clara, California 95051 Order Number: 164852-001

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used

in accordance with the instruction manual, may cause interference to radio communications. It has

been tested and found to comply with the limits for a Class A Computing De ice pursuant to Subpart J

of Part 15 of FCC rules, which are designed to pro ide reasonable protection against such interference

when operated in a commercial en ironment. Operation of this equipment in a residential area is likely

to cause interference in which case the user, at his own expense, will be required to take whate er

measures may be required to correct the interference.

Additional copies of this manual or other Intel literature may be obtained from:

Literature Department

Intel Corporation

3065 Bowers A enue

Santa Clara, CA 95051

The information in this document is subject to change without notice.

Intel Corporation makes no warranty of any kind with regard to this material, including, but not

limited to, the implied warranties of merchantability and fitness for a particular purpose. Intel

Corporation assumes no responsibility for any errors that may appear in this document. Intel

Corporation makes no commitment to update nor to keep current the information contained in this

document.

Intel Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied

in an Intel product. No other circuit patent licenses are implied.

Intel software products are copyrighted by and shall remain the property of Intel Corporation. Use,

duplication or disclosure is subject to restrictions stated in Intel’s software license, or as defined in

ASPR 7-104.9(a) (9).

No part of this document may be copied or reproduced in any form or by any means without prior

written consent of Intel Corporation.

Intel Corporation makes no warranty for the use of its products and assumes no responsibility for any

errors which may appear in this document nor does it make a commitment to update the information

contained herein.

Intel retains the right to make changes to these specifications at any time, without notice.

Contact your local sales office to obtain the latest specifications before placing your order.

The following are trademarks of Intel Corporation and its affiliates and may be used only to identify

Intel products: iLBX iPDS Plug-A-Bubble

BITBUS im iRMX PROMPT

COMMputer iMMX iSBC Promware

CR DIT Insite iSBX QU X

Data Pipeline Intel iSDM QU ST

G NIUS intel iSXM Ripplemode

intelBOS Library Manager RMX/80

i2ice Intelevision MCS RUPI

inteligent Identifier Megachassis Seamless

IC inteligent Programming MICROMAINFRAM SOLO

iCS Intellec MULTIBUS SYST M 2000

iDBP

iDIS Intellink

iOSP MULTICHANN L

MULTIMODUL UPI

MDS is an ordering code only and is not used as a product name or trademark. MDS® is a registered

trademark of Mohawk Data Sciences Corporation.

*MULTIBUS is a patented Intel bus.

R V. R VISION HISTORY DAT

-001 Original Issue 3/84

PREFACE

Ab ut This Manual

This manual describes the Intel iUP-200A/201A uni ersal programmer and how

to use the 201A model in off-line mode to store programs and data into pro

grammable read-only memory (PROM) de ices. (The iPPS PROM Programming

Software User's Guide describes how to use the uni ersal programmer in on-line

mode.) It is for engineers and designers who are de eloping firmware for ROM-,

PROM-, EPROM-, or E2PROM-based systems.

The following paragraphs describe the general contents of each chapter .

Chapter 1 Contains a general description of the uni ersal programmer and a

tutorial o er iew of PROM programming and firmware

de elopment.

Chapter 2 Describes how to set up and initialize the uni ersal programmer

system.

Chapter 3 Co ers the off-line operation of the uni ersal programmer and de

scribes the front panel operation of the iUP-201 A.

Chapter 4 Pro ides a number of off-line programming examples that illustrate

using the uni ersal programmer in typical firmware de elopment

applications.

Appendix A Describes error conditions and error messages.

Appendix B Contains host serial command protocol for connecting the uni ersal

programmer to a non-Intel host.

Appendix C Contains reference tables for numeric con ersion and ASCII codes.

Appendix D Contains a schematic for building an RS-232 to 20ma con erter.

C nventi ns Used In This B k

Throughout this book, the iUP-200A/201 A is called the uni ersal programmer.

The following symbol con entions are used in this manual to document notes,

cautions, and warnings:

A section of text introduced by the symbol

NOTE

emphasizes comments with special significance.

A section of text introduced by the symbol

Preface iUP-200A/201A

gi es instructions necessary to a oid damage to equipment or loss of stored

information.

A section of text introduced by the symbol

WARNING I

gi es instructions necessary for personal safety.

Other Pertinent Intel Literature

While this guide is a self-contained document describing the off-line use of the

uni ersal programmer, se eral other Intel documents are related to firmware de

elopment and to the de elopment of microprocessor-based systems as follows:

• /UP-XXPersonality Module User 's Guide, order number aries

Each Intel personality module has its own user’s guide describing its

installation, applicable de ices, applicable hosts, and unique characteristics.

Consult the Microcontroller andbook, the Microprocessor and Peripheral

andbook, and the Memory Components andbook to determine which per

sonality module to use for specific PROM de ices. Intel supplies the ap

propriate personality module user’s guide with each personality module.

You can order additional copies from the Intel Literature Department. Refer

to page ii for the address.

• iPPS PROM Programming Software/iUP-200A/201A Universal Programmer

Pocket Reference, order number 164853

This pocket reference describes the iPPS software and uni ersal programmer

off-line operation and command syntax.

• iPPS PROM Programming Software User's Guide, order number 164861

This manual describes how to use the uni ersal programmer in on-line mode.

• ISIS-XX User's Guide, order number aries

This manual is a comprehensi e guide to the Intel operating system under

which the iPPS runs.

• Microcontroller andbook, order number 210918

This handbook contains all application notes, article reprints, data sheets,

and other user information on the MCS®-48, MCS-51 (8-bit), and the

MCS-96 (16-bit) product families.

•

Microprocessor and Peripheral andbook, order number 210844

This handbook contains data sheets on all microprocessors and peripherals.

Development Systems andbook, order number 210940

iUP-200A/201A Preface

This handbook contains data sheets on de elopment systems and supporting

software.

• Memory Components andbook, order number 210830

This handbook contains all application notes, article reprints, data sheets,

and other design information on RAMs, DRAMs, EPROMs, E2PROMs, and

bubble memories.

vii/viii

SERVICE INFORMATION

Intel Customer Engineers pro ide the best ser ice for your Intel products. These

trained professionals pro ide the prompt, efficient on-site installation, pre enti e

maintenance, and correcti e maintenance ser ices required to keep your equip

ment in the best operating condition.

The Intel Customer Engineer pro ides the ser ice needed through a prepaid ser

ice contract or on an hourly charge basis. For further information, contact your

local Intel sales office.

United States customers can obtain Intel ser ice and repair assistance by contact

ing the Intel Product Ser ice Center in their area. Customers outside the United

States should contact their sales source (Intel Sales Office or Authorized

Distributor) for ser ice information and repair assistance.

Before calling the Product Ser ice Center, ha e the following information

a ailable:

• The date you recei ed the product.

• The complete part number of the product (including dash number). On

boards, this number is usually silk-screened onto the board. On other

products, it is usually stamped on a label.

• The serial number of the product. On boards, this number is usually stamped

on the board. On other products, the serial number is usually stamped on a

label mounted on the outside of the chassis.

• The shipping and billing address.

• If the Intel product warranty has expired, a purchase order number for

billing.

• Ad ise the Product Ser ice Center personnel of any applicable extended war

ranty agreements.

Use the following telephone numbers to contact the Intel Product Ser ice Center:

Western Region:

Midwest Region:

Eastern Region:

International:

TWX:

(602) 869-4951

(602) 869-4392

(602) 869-4045

(602) 869-4391

(910) 952-1330

Always contact the Product Ser ice Center before returning a product to Intel for

repair. Product Ser ice Center personnel will gi e you a repair authorization

number, shipping instructions, and other information to ensure fast, efficient

ser ice. If you are returning a product damaged during shipment or if the product

is out of warranty, you must ha e a purchase order before Intel can start the repair.

If a ailable, use the original factory packaging material to ship the product to the

Intel Product Ser ice Center. If the original packaging material is not a ailable,

wrap the product in a cushioning material such as Air Cap SD-240, manufactured

Service Information iUP-200A/201A

by the Sealed Air Corporation, Hawthorne, N.J. Securely enclose it in a hea y-

duty corrugated shipping carton, mark it “FRAGILE,” and ship it to the address

specified by the Intel Product Ser ice Center.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Intel Hauptplatine Handbücher

Intel

Intel G4V500-B Bedienungsanleitung

Intel

Intel SE7210TP1-E - Socket 478 ATX Server... Bedienungsanleitung

Intel

Intel D845PEBT2 Bedienungsanleitung

Intel

Intel S5000XVN - Workstation Board Motherboard Bedienungsanleitung

Intel

Intel 1-N450 Bedienungsanleitung

Intel

Intel G31 EXPRESS CHIPSET SPECIFICAT Bedienungsanleitung

Intel

Intel BLKDG41CN Konfigurationshandbuch

Intel

Intel AI5VG Bedienungsanleitung

Intel

Intel D945PSN Bedienungsanleitung

Intel

Intel Thin Mini-ITX Leitfaden

Intel

Intel D201GLY - Desktop Board Motherboard Bedienungsanleitung

Intel

Intel DH55TC Bedienungsanleitung

Intel

Intel BOXD925XEBC2LK - Desktop Board D925XEBC2LK Bedienungsanleitung

Intel

Intel D945PLRN Bedienungsanleitung

Intel

Intel E39545-004 Bedienungsanleitung

Intel

Intel DG965SS Bedienungsanleitung

Intel

Intel D2550MUD2 Bedienungsanleitung

Intel

Intel DP55SB - Desktop Board Extreme Series... Technisches Handbuch

Intel

Intel Desktop Board D850EMD2 Bedienungsanleitung

Intel

Intel DH61SA Bedienungsanleitung

Intel

Intel PD440FX Bedienungsanleitung

Intel

Intel SBC-776 Bedienungsanleitung

Intel

Intel DG965PZ Bedienungsanleitung

Intel

Intel BB5000XALR Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung

Intel iUP-200A Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken