Intel S1200RP Bedienungsanleitung

Getting Started with the

Intel®Server Board S1200RP

UEFI Development Kit

June 2016

Getting Started with the

Intel® Server Board S1200RP UEFI Development Kit

ii June 2016

Legal Information

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED,

BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS

PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER,

AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS

INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR

INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for

use in medical, life saving, or life sustaining applications.

Intel may make changes to specifications and product descriptions at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel

reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from

future changes to them.

This product may contain design defects or errors known as errata which may cause the product to deviate from published

specifications. Current characterized errata are available on request.

Code Names are only for use by Intel to identify products, platforms, programs, services, etc. (“products”) in development by

Intel that have not been made commercially available to the public, i.e., announced, launched or shipped. They are never to be

used as “commercial” names for products. Also, they are not intended to function as trademarks.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Intel, Intel Core, and the Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United

States and other countries.

*Other names and brands may be claimed as the property of others.

Before You Begin

Getting Started Guide iii

Contents

1Before You Begin ..............................................................................................1

1.1 The Development Kit ..............................................................................1

1.2 Requirements ........................................................................................1

1.3 Supported and recommended hardware components...................................2

1.4 Using a SPI flash programmer..................................................................3

1.5 Jumper Settings for Management Controllers..............................................4

1.6 Legacy BIOS Support..............................................................................4

1.7 Network Boot Features............................................................................5

2Firmware Upgrade Process .................................................................................7

2.1 Firmware Upgrade..................................................................................7

2.2 Capsule Update......................................................................................8

2.3 USB Firmware Recovery ..........................................................................9

2.4 Firmware Installation (Socketed SPI Flash) ................................................9

2.5 Firmware Installation (Soldered SPI Flash)...............................................10

3User and Reference Documentation ...................................................................13

Figures

Figure 1 - Intel Server Board S1200V3RPS ...........................................................1

Figure 2 - Jumper Block and Motherboard Headers ................................................4

Figure 3 - Recovery Jumper and SPI Device Locations ............................................7

Tables

Table 1 Supported Hardware and Firmware Components ........................................2

Table 2 Recommended Hardware Components ......................................................3

Getting Started with the

Intel® Server Board S1200RP UEFI Development Kit

iv June 2016

Before You Begin

This guide provides an overview of how to upgrade or install the developer platform

UEFI firmware image on an Intel® Server Board S1200RP UEFI Development Kit.

1.1 The Development Kit

The development kit helps engineers design, test, and debug Unified Extensible

Firmware Interface (UEFI) drivers and applications on a UEFI compliant system. You

can download firmware and documentation from the Intel® Architecture Firmware

Resource Center: https://firmware.intel.com/develop/server-development-kit.

Figure 1 - Intel Server Board S1200V3RPS

1.2 Requirements

Before upgrading or installing a UEFI compliant firmware image on your development

kit, you need the following skills, components, and tools:

•Intel® Server Board S1200RP UEFI Development Kit target system,

assembled with components from the supported hardware component list.

•PC assembly skills.

Getting Started with the

Intel® Server Board S1200RP UEFI Development Kit

2 June 2016

•USB FAT-formatted flash drive.

•SPI flash programmer with software utility (optional).

•Host PC with Microsoft Windows* operating system (optional, for SPI flash).

You must use one of the supported firmware images included in this development kit:

•SDV_RP_B6_release.rom/.cap – The release version of the firmware, with

debugging features disabled. This is the recommended firmware image.

•SDV_RP_B6_debug.rom/.cap – The debug version of the firmware, with debug

output redirected to the serial port (COM1).

•SDV_RP_B6_srcdbg.rom/.cap – The source level debug version of the

firmware, which supports the Intel®UEFI Development Kit Debugger Tool using

the serial port (COM1). This image is recommended only for advanced debugging.

•FVMAIN.fv – The USB recovery firmware image, based on the release firmware.

The development kit also includes:

•Update Utilities for the UEFI Shell: FvUpdate_S1200RP.efi &

CapsuleApp.efi

•User documentation, including this guide and the release notes.

1.3 Supported and recommended hardware

components

Table 1and Table 2describe the supported and recommended PC hardware

components (respectively) for the Intel® Server Board S1200RP UEFI Development

Kit.

You must use the motherboard and processor listed in the table with the firmware

images provided with the development kit.

Table 1 Supported Hardware and Firmware Components

Hardware and

Firmware Notes

Intel® Server

Board S1200RP •You must use the commercially available Intel® Server Board

S1200V3RPS or Intel® Server Board S1200V3RPL.This document

is based on the Intel® Server Board S1200V3RPS.

Intel® Xeon®

Processor E3-1275

•You must use the Intel® Xeon® Processor E3-1275 v3 with heat

sink. This processor is available commercially.

Intel® Server

Board S1200RP

UEFI Development

Kit firmware image

•You must use one of the firmware images from the Intel® Server

Board S1200RP UEFI Development Kit. The firmware images in the

development kit have been validated to work only with the specific

processor and motherboards listed above.

Before You Begin

Getting Started Guide 3

Table 2 Recommended Hardware Components

Recommended

Hardware Notes

16GB (2 x 8GB)

DDR3 1333

memory

•The Intel® Server Board S1200V3RPS supports up to 32 GB RAM.

•Use at least 16 GB DDR3 memory in the development kit.

Power supply

(550W minimum) •A power supply that meets the requirements of the Intel Server

Board S1200V3RPS is adequate.

•The minimum rating is 550W. Consider ordering a complete system

from Hard Drives Northwest so that the board is packaged with an

appropriate chassis and power supply.

SATA HDD 500GB •Install a hard drive that has at least 500 GB.

•Testing hard drives over 2.2TB requires the use of UEFI.

SATA DVD-RW

Optical Disk Drive

or other install

media

•Make sure you have a DVD drive or other media (such as a network

connection or USB drive) appropriate for installing the operating

system.

Compatible Chassis •A chassis is recommended, but not required.

USB keyboard and

USB mouse •Including a USB keyboard and mouse with the developer's platform

allows you to input UEFI shell commands and navigate firmware

setup menus.

Monitor (VGA) •A monitor is recommended to enable viewing console output.

Installing the firmware image on an unsupported motherboard may render theNote:

motherboard unusable until it is re-flashed with a backup copy of the

motherboard's original firmware. Use only supported components with the Intel®

Server Board S1200RP UEFI Development Kit.

1.4 Using a SPI flash programmer

The SPI flash programmer is optional, but may be needed to reflash the firmware

image. This is because the development and testing of pre-production products can

corrupt the flash image. If the flash image becomes corrupted, you may need to

perform a hardware-based reprogramming of the SPI flash part.

To reprogram the SPI flash part, you need a third-party SPI flash programmer and the

corresponding software application. These elements allow you to transfer the firmware

image from the host PC to the SPI memory device on the firmware developer platform

(the target PC).

SPI reflash instructions in this document are based on products from DediProg

Technology Co, Ltd.*, which have been verified to work with the supported hardware.

Getting Started with the

Intel® Server Board S1200RP UEFI Development Kit

4 June 2016

1.5 Jumper Settings for Management Controllers

The Intel® Server Board S1200V3RPS is equipped with several server management

featured that may need to be disabled for software development and validation.

Disabling the Baseboard Management Controller (BMC) and Manageability Engine (ME)

will disable watchdog timers, which reduces the chance of the system resetting when

debugging firmware.

We recommend the following settings on the Intel® Server Board S1200V3RPS:

•Jumper J3K2 – position 2-3 (ME Force Update, Enabled)

•Jumper J3K6 – position 2-3 (BMC Force Update, Enabled)

Please refer to Figure 2for motherboard jumper settings.

Figure 2 - Jumper Block and Motherboard Headers

1.6 Legacy BIOS Support

The Compatibility Support Module (CSM) can be enabled or disabled through setup:

Before You Begin

Getting Started Guide 5

EDKII Menu -> Boot Options -> CSM Control

Use the [F2] key to enter setup when booting the system.

This setting lets you manage legacy BIOS support for UEFI Class 2 (CSM Enabled) and

UEFI Class 3 (CSM Disabled) systems. The default setting (Disabled) is recommended

for testing UEFI drivers and operating systems. While testing, this setting will reveal

any unintended dependencies on legacy BIOS calls.

1.7 Network Boot Features

The Intel® Server Board S1200RP UEFI Development Kit supports Pre-Execution

Environment (PXE) boot for IPV4 and IPV6 networking using on-board and add-in

networking devices. Because of added initialization time, network boot for the four on-

board networking devices is disabled by default in firmware setup.

Users can enable PXE boot for on-board networking by enabling the ’EFI Network’

setting in the firmware setup menu.

EDKII Menu -> Advanced -> Network Configuration

As of SDV.RP.B6, the Intel® Server Board S1200RP UEFI Development Kit supports

UEFI HTTP and HTTPS boot. These features are described in whitepapers located on

the Tianocore github wiki:

https://github.com/tianocore/tianocore.github.io/wiki/EDK%20II%20White%20papers

Getting Started with the

Intel® Server Board S1200RP UEFI Development Kit

6 June 2016

Inhaltsverzeichnis

Andere Intel Serverplatine Handbücher

Intel

Intel S5500WB Bedienungsanleitung

Intel

Intel S875WP1 - EATX MBD 875 P4 DDR-2CH SATA RAID VID... Bedienungsanleitung

Intel

Intel SE7525GP2 Bedienungsanleitung

Intel

Intel S1200SPL Bedienungsanleitung

Intel

Intel SR1475NH1 - Server Platform - 0 MB RAM Bedienungsanleitung

Intel

Intel SE7525RP2 Bedienungsanleitung

Intel

Intel X38ML - Server Board Motherboard Bedienungsanleitung

Intel

Intel SCB2 - Server Board Motherboard Bedienungsanleitung

Intel

Intel SE7501CW2 Kurzanleitung zur Einrichtung

Intel

Intel SE7520BD2 Bedienungsanleitung

Intel

Intel S3000PT Einrichtungshandbuch

Intel

Intel S5000VCL - Server Board Motherboard Bedienungsanleitung

Intel

Intel SE7501HG2 Bedienungsanleitung

Intel

Intel SHG2 Bedienungsanleitung

Intel

Intel SE7501WV2ATA Montageanleitung

Intel

Intel S3200SH Installationsanleitung

Intel

Intel SE7500WV2 - Server Chassis - SR2300 Einrichtungshandbuch

Intel

Intel S2600CO Family Konfigurationshandbuch

Intel

Intel N440BX Bedienungsanleitung

Intel

Intel S5500BCR Bedienungsanleitung

Intel

Intel S2600KP Bedienungsanleitung

Intel

Intel S7200AP Kurzanleitung zur Einrichtung

Intel

Intel BB5520UR Konfigurationshandbuch

Intel

Intel SE7230NH1-E Bedienungsanleitung

Beliebte Serverplatine Handbücher anderer Marken

Abit

Abit SI-2PS Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6026TT-TF Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Installations- und Betriebshandbuch

Advantech

Advantech ASMB-784 Bedienungsanleitung

MSI

MSI 5000P Master2 Series Bedienungsanleitung

MSI

MSI MS-S0131 Bedienungsanleitung

TYAN

TYAN Transport GT24 (B2912) Service Bedienungsanleitung

MSI

MSI E7320 Master-2S Bedienungsanleitung

MSI

MSI 5000P Master-A4M Bedienungsanleitung

Gigabyte

Gigabyte R182-34A Bedienungsanleitung

Asus

Asus ASMB3-SOL Bedienungsanleitung

Supero

Supero H8QI6-F Bedienungsanleitung

ASROCK Rack

ASROCK Rack EP2C612 WS Bedienungsanleitung

Asus

Asus ASMB-LE Bedienungsanleitung

MSI

MSI MS-96E3 Bedienungsanleitung

Supero

Supero SUPERSERVER 8047R-TRF+ Bedienungsanleitung

MSI

MSI K9ND Speedster2 Series Bedienungsanleitung

Advantech

Advantech ASMB-813I Series Installations- und Betriebshandbuch