Intelbras IVP 4101 PET Bedienungsanleitung
User manual
IVP 4101 PET smart
IVP 4101 PET smart
Passive infrared sensor
Congratulations, you have just purchased a product with Intelbras quality and safety.
The passive infrared sensor IVP 4101 PET smart was developed by Intelbras with
100% digital technology. The sensor has an integrated Temperature Sensor to offer
the same detection sensitivity in different environments (from -10 °C to + 50 °C)
reducing the risk of false triggers, DIGITAL technology, SMD mounting. Indicated for
INDOOR ENVIRONMENTS with the presence of pets weighing up to 20 Kg, it is easy
to install because it is wireless and can be installed in most devices that work at the
same frequency and modulation available on the market.
Care and safety
» This product is intended for Indoor environments.
» It is important to note that the Pet function is designed for crawling animals, so if the animal is not on the ground, but
on top of a bench, for example, it can be detected thus canceling the Pet function, as can be seen in the image below:
» Avoid touching the surface of the PIR, if necessary, use a soft cloth for cleaning.
» Do not place objects in front of the sensor. To secure the detection area, avoid curtains, screens, screens, or any object
that blocks the scan.
» Wireless communication technology, when exposed to environments with high power radiation, can suffer interference
and have its performance impaired. Example: locations near TV towers,AM/FM radio stations, ham radio stations, routers,
etc.
» Recommended installation height is 1.8 to 2.2 meters.
» Do not use the sensor in areas with sudden changes in temperature such as air conditioners and heaters, fans, refrigera-
tors and ovens. Do not expose the sensor directly or to sunlight reections.
» For the use of the articulator, we recommend that the installation be done by a professional installer, as its incorrect use
may affect the sensor’s coverage angle.
» The sensor must be installed where a possible intruder is easily detected, that is, where there is movement across the
sensor’s detection beams.
» We recommend that the sensor conguration is done according to item
5. Conguring the sensor IVP 4101 PET smart
(for cards in version 4410350/5 and rmware 3.0.0)
and item
8. Conguring the sensor IVP 4101 PET smart (for cards
version 4410350/4 and rmware 2.2.1 o earlier).
» LGPD – General Personal Data Protection Law: Intelbras does not access, transfer, capture or perform any other type of
processing of personal data from this product.
Summary
1. Technical specications 6
2. Characteristics 6
3. Product 6
3.1. Detection range ............................................................................7
4. Installing the smart IVP 4101 PET sensor 7
5. Conguring the IVP 4101 PET smart sensor (for cards in version 4410350/5 and rmware 3.0.0) 9
5.1. Sensitivity adjustment of the smart IVP 4101 PET sensor..............................................9
5.2. Setting the operating mode of the smart IVP 4101 PET sensor .........................................9
5.3. IVP 4101 PET smart sensor supervision adjustment.................................................10
6. Low battery sensor 11
7. Test 12
8.Conguring the IVP 4101 PET smart sensor (for board version 4410350/4 and rmware 2.2.1 o earlier) 12
8.1. Sensitivity adjustment of the smart IVP 4101 PET sensor.............................................12
8.2. Setting the operating mode of the smart IVP 4101 PET sensor ........................................12
8.3. IVP 4101 PET smart sensor supervision adjustment.................................................13
9. Homologation 14
Warranty term 15
6
1. Technical specications
Coverage - Detection Angle 90°
Detection range 12 m
Operating Temperature - 10 °C to + 50 °C
Transmission frequency 433,92 MHz
Sensitivity Levels 2
Immunity to animals 20 kg
Installation height Check item
4. Installing the smart IVP 4101 PET
sensor in this manual
Detection method PIR
Battery LITHIUM CR123A 3 V
Supervision Supervised (FSK) or unsupervised (OOK)
Anti-jamming Immunity against interference from malicious signals
2. Characteristics
» Digital micro-processed detection technology.
» 2 levels of sensitivity.
» 2 modes of operation, CONT (Continuous Intelligent) and ECO (Economy).
» Battery level sensor.
» No articulator required for wall installation.
» Passive infrared with dual element.
» Triggered by motion detection.
» Power: LITHIUM 3 Vdc battery – CR123A.
» Immunity to crawling pets up to 20 kg.
» Ease of installation.
3. Product
Top front cover
Lower front cover
Flat Fresnel Lens
PIR
Jumper ECO/CONT (JP2)
Jumper SENS (JP1)
Jumper SUPERV (JP3)
Battery
7
3.1. Detection range
Upper view
90°
Distance (m)
Side view
1,8 m ~ 2,20 m
Height (m)
4. Installing the smart IVP 4101 PET sensor
Before starting the installation it is necessary to dene the height of installation of the sensor. We recommend that this
sensor is installed as per the table below.
d
h
Distance (d) Pet Installation height (h)
Less than or equal to 4 m Without the presence of a pet 1,8 to 2 m
With the presence of a pet
Greater than 4 m up to 12 m With the presence of a pet 2,1 to 2,2 m
Without the presence of a pet 1,8 to 2,2 m
Note: to install the IVP 4101 PET smart sensor, make sure that the battery is not connected to the board.
The sensor IVP 4101 PET smart does not have an articulator. So for your installation, follow the procedure below:
» Step 1: remove the lower front cover from the sensor.
8
» Step 2: if the installation is done directly on the wall, use the oblong located in the upper rear region of the sensor and
the hole indicated for placement of the screw just below the connectors.
Screw hole
Oblongo
» Step 3: if the installation is done in the corner of the wall. Use the holes indicated on the back cover.
Fixing location of the screws for
installation in the wall corner.
Important: the IVP 4101 PET smart was designed for INDOOR AND CLOSED AREAS and with the presence of animals of
up to 20 kg, so do not use it for protection of outdoor or open areas and with the presence of animals of more than 20 kg.
9
5. Conguring the IVP 4101 PET smart sensor (for cards in
version 4410350/5 and rmware 3.0.0)
After the sensor is properly installed, make the following adjustments according to the information below:
5.1. Sensitivity adjustment of the smart IVP 4101 PET sensor
The SENS jumper (JP1) is used to control the detection sensitivity. With jumper JP1 open the sensor provides maxi-
mum sensitivity. With jumper JP1 closed the sensor provides minimum sensitivity. Closed factory default.
5.2. Setting the operating mode of the smart IVP 4101 PET sensor
Via the ECO/CONT jumper (JP2), select between intelligent continuous mode and economy mode. With jumper JP2
open the sensor is in intelligent continuous mode. With jumper JP2 closed, the sensor is in economy mode. Factory
default: closed.
After energized, the sensor will operate in the test period for 15 minutes so that the installer can make all the sensor
positioning adjustments. During this period, at any motion detection, the LED lights up and a trigger is generated.
Then the sensor will operate according to the congured mode.
Intelligent Continuous Mode: the sensor takes a reading of the environment and generates a trigger for 3 move-
ments, after this trigger generation the sensor goes into hibernation for 2 minutes. During this period, the indication
LED is not activated and no new triggers are generated, as a notication has just been sent to the control panel.After
the sleep time, the sensor is monitoring the environment until detecting 3 more events.
Note:
this mode of operation causes a greater consumption of battery power, especially where there is a large
number of people.
Trial period
15 min
Period of
stabilization
Time the sensor remains on
Smart Continuous Mode
2 min
After inserting
the battery,
the LED is
blinking and
there is no
detection.
At any detection
the LED lights
up and
generates a
trigger.
The sensor detects (lights the
LED and generates a trigger) for
the next 3 movements, after
which it goes into hibernation.
During this period the
LED does not light and
no new triggers are
generated.
After the
hibernation time,
the sensor returns to
detect and generate
triggers in the
central, starting the
cycle again.
Período
de teste
15 min
Período de
estabilização
Tempo em que o sensor permanece ligado
Modo Contínuo inteligente
2 min
Após colocar a
bateria, o LED
ca piscando
e não há
detecção.
A qualquer
detecção o LED
acende e gera
um disparo.
O sensor detecta (acende o LED
e gera um disparo) para os
próximos 3 movimentos, após,
entra em hibernação.
Durante esse período o
LED não acende e não
são gerados novos
disparos.
Passando o tempo
de hibernação o
sensor volta a
detectar e gerar
disparos na
central, iniciando o
ciclo novamente.
Período
de teste
15 min
Período de
estabilização
Tempo em que o sensor permanece ligado
Modo Contínuo inteligente
2 min
Após colocar a
bateria, o LED
ca piscando
e não há
detecção.
A qualquer
detecção o LED
acende e gera
um disparo.
O sensor detecta (acende o LED
e gera um disparo) para os
próximos 3 movimentos, após,
entra em hibernação.
Durante esse período o
LED não acende e não
são gerados novos
disparos.
Passando o tempo
de hibernação o
sensor volta a
detectar e gerar
disparos na
central, iniciando o
ciclo novamente.
10
Economy Mode: the sensor takes a reading of the environment and right after motion is detected and the trigger
is generated, it goes into sleep, which can last for a period of 30 seconds (environment with little movement) up to
2 minutes (environment with a lot of movement). During this period, the LED indication is not activated and no new
triggers are generated,as a notication has just been sent to the switch.After the sleep time, the sensor is monitoring
the environment until detecting a new movement.
» Advantage of the Economy mode: this ability to learn from the environment, means that in places with high
degrees of movement, periodic and non-continuous shots are generated, in turn, saving battery power.
Trial period
15 min
Period of
stabilization
Time the sensor remains on
Economy Mode
30 seg - 2 min
After inserting
the battery,
the LED is
blinking and
there is no
detection.
At any detection
the LED lights
up and
generates a
trigger.
After detecting the rst
movement, the sensor turns on
the LED, triggers and enters the
sleep period.
During this period the
LED does not light and
no new triggers are
generated.
After the
hibernation time, the
sensor returns to
detect and generate
triggers in the
central, starting the
cycle again.
Período
de teste
15 min
Período de
estabilização
Tempo em que o sensor permanece ligado
Modo Contínuo inteligente
2 min
Após colocar a
bateria, o LED
ca piscando
e não há
detecção.
A qualquer
detecção o LED
acende e gera
um disparo.
O sensor detecta (acende o LED
e gera um disparo) para os
próximos 3 movimentos, após,
entra em hibernação.
Durante esse período o
LED não acende e não
são gerados novos
disparos.
Passando o tempo
de hibernação o
sensor volta a
detectar e gerar
disparos na
central, iniciando o
ciclo novamente.
Período
de teste
15 min
Período de
estabilização
Tempo em que o sensor permanece ligado
Modo Contínuo inteligente
2 min
Após colocar a
bateria, o LED
ca piscando
e não há
detecção.
A qualquer
detecção o LED
acende e gera
um disparo.
O sensor detecta (acende o LED
e gera um disparo) para os
próximos 3 movimentos, após,
entra em hibernação.
Durante esse período o
LED não acende e não
são gerados novos
disparos.
Passando o tempo
de hibernação o
sensor volta a
detectar e gerar
disparos na
central, iniciando o
ciclo novamente.
5.3. IVP 4101 PET smart sensor supervision adjustment
The SUPERV (JP3) jumper is used to select between supervised (FSK) or unsupervised (OOK) modes.With jumper JP3 open
the sensor is in supervised mode (FSK). With jumper JP3 closed the selected mode is unsupervised (OOK). The type of
supervision to be used will depend on the receiver’s compatibility with the Control Panel.
Factory standard: unsupervised
Andere Handbücher für IVP 4101 PET
1
Inhaltsverzeichnis
Andere Intelbras Sicherheitssensor Handbücher
Intelbras
Intelbras IVP 8000 EX Bedienungsanleitung
Intelbras
Intelbras XAS 8000 Bedienungsanleitung
Intelbras
Intelbras IVP 1000 PET Bedienungsanleitung
Intelbras
Intelbras IVP 3000 PET Bedienungsanleitung
Intelbras
Intelbras IVP 8000 EX Bedienungsanleitung
Intelbras
Intelbras IVP 4101 PET Bedienungsanleitung
Intelbras
Intelbras VP 5311 MW Pet Bedienungsanleitung
Intelbras
Intelbras IVP 1000 PET Bedienungsanleitung
Intelbras
Intelbras IVP 2000 SF Bedienungsanleitung
