Intelligent Motion Systems Panther HD Integral Driver and Power Supply Bedienungsanleitung
REV101805
FEATURES
•
Integral Driver and Power Supply
•
Low Cost
•
Extremely Compact
(4.0 x 6.7 x 4.4 inches)
(101 X 171 X 112 mm)
•
High Output Current
(7 Amps RMS, 10 Amps Peak)
•
Advanced Surface Mount and
ASIC Technology
•
115/240 VAC, 50/60 Hz
Ver sions
•
No Minimum Inductance
•
Fault and Power Indicators
•
Up to a 10 MHz Step Clock Rate
•
Optically Isolated Inputs
•
Automatic Current Reduction
•
Short Circuit and Over
Tem per a ture Protection
•
Up to 51,200 Steps/Rev
•
Automatically Switches
Be tween Slow and Fast Decay
for Un matched Performance
•
14 Selectable Resolutions, in
Both Decimal and Binary
•
Fault Output
•
Optional Rack Mounting
•
Number of Microsteps Per
Step Can Be Changed
On-The-Fly without Motor
Movement Interruption
•
20 kHz Chopping Rate
•
Built-in Line Filter
•
Optional On-Board Indexer and
Encoder Feedback
Incorporated into the PANTHER
HD driv er are proprietary circuits
that minimize rip ple current while
maintaining a 20 kHz chopping
rate. This prevents ad di tion al mo-
tor heat ing that is common with
driv ers re quir ing higher chopping
rates. Now low inductance stepper
motors can be used to improve high
speed per for mance and system
ef cien cy.
The PANTHER HD allows you to
change the number of microsteps
per step at any time. There is no
need to reset the driver. Built into
the driver are 14 different res o lu -
tions in both binary and decimal, al-
lowing the user to rapidly move long
distances, yet precisely po si tion the
motor at the end of travel without
the ex pense of high per for mance
controllers.
For many low and medium power
applications, the PANTHER HD pro-
vides a low cost, compact solution
along with in no va tive features found
only in IMS drivers.
DESCRIPTION
The PANTHER HD is a high per for -
mance, low cost microstepping driv-
er with in te gral power supply that in-
cor po rates ad vanced sur face mount
and ASIC tech nol o gy. The PANTHER
HD is small, easy to in ter face and
use, yet powerful enough to handle
the most de mand ing applications.
The heart of the PANTHER HD is
our IM1007 OEM microstepping
driv er which utilizes our highly in-
te grat ed IM2000 microstepping
con trol ler IC.
COMPLETE HIGH PERFORMANCE
MICROSTEPPING SYSTEM
COMPLETE HIGH PERFORMANCE
MICROSTEPPING SYSTEM
BLOCK DIAGRAM
REV101805
ELECTRICAL SPECIFICATIONS
Input Voltage
...............................................................
.....
90 to 128 VAC or optional 180 to 264 VAC, 50/60 Hz
Drive Current Per Phase
...............................................................
.............
2 to 10 Amps Peak (Max 7 Amps RMS)
Isolated Logic Inputs
...................................................
Step Clock, Direction, Enable, Reset, Microstep Res o lu tion 0 – 3
Step Frequency (Max)
...............................................................
...............................................................
.........
1.8 MHz
Steps/Revolutions – with 1.8° Step Motors
...................
400, 800, 1000, 1600, 2000, 3200, 5000, 6400,
10000, 12800, 25000, 25600, 50000, 51200
Status Indicators (LEDs)
...............................................................
..............................................................
Power, Fault
Protection
...............................................................
...................
Thermal, Over/Under Voltage, Ø to Ø, Ø to Ground
and Ø to +V
BUS
Short Circuit
4.400
(111.76)
6.740
(171.20)
0.500
(12.70)
0.090
(2.29)
P1
P2
1
13
1
6
POWER FAULT
5.400
(137.16)
0.370
(9.40) TYP.
0.250
(5.35)
TYP.
0.500
(12.70)
0.210
(5.33) TYP.
1.930
(49.02)
TYP.
3.980
(101)
FAULT POWER
5.060
(128.52)
4.18
(106.0)
(Rack Mount Version)
PIN ASSIGNMENTS
CONNECTOR P1
CONNECTOR P2
PIN
FUNCTION
PIN
FUNCTION
1
Phase A
1
Microstep Resolution Select 0
2
Phase /A
2
Microstep Resolution Select 1
3
Phase B
3
Microstep Resolution Select 2
4
Phase /B
4
Microstep Resolution Select 3
5
AC Neutral
5
Step Clock
6
AC Line
6
Direction
7
Enable
8
Reset
9
Opto Supply
10
Fault
11
Ground
12
Current Adjust
13
Reduction Adjust
TEMPERATURE
St
orage
............................................................
–40 to +125° C
Case
...............................................................
.........
0 to +60° C
ORDER INFORMATION
Name
Part Number
Microstepping System
..........................................
Panther HD
Rack Mounting Option
.....................
add –RM to basic part #
240 VAC Input Voltage
..................
add –240 to basic part #
Small End Screwdriver
.....................................................
SD–1
MECHANICAL
Dimensions in Inches (mm)
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Intelligent Motion Systems Computerhardware Handbücher
Intelligent Motion Systems
Intelligent Motion Systems INT-481 Bedienungsanleitung
Intelligent Motion Systems
Intelligent Motion Systems MFM Motion Detector Bedienungsanleitung
Intelligent Motion Systems
Intelligent Motion Systems Modular LYNX System Bedienungsanleitung
Intelligent Motion Systems
Intelligent Motion Systems MDrive DSP-402 Benutzerhandbuch
Intelligent Motion Systems
Intelligent Motion Systems MForce PowerDrive Plus MForce Series Microstepping... Bedienungsanleitung
Intelligent Motion Systems
Intelligent Motion Systems MDrive34AC & 42AC Plus MDrive34AC Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
