Intellinet 524056 Bedienungsanleitung

GiGabit

EthErnEt

ExprEssCard

usEr manual

MODEL 524056

INT-524056-UM-0208-01

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS

™

Gigabit Ethernet ExpressCard, Model 524056.

A high-performance PCMCIA-style network adapter that ts in the new

ExpressCard/54 and ExpressCard/34 slots of a computer, this card

supports the Single PCI Express lane (x1) specications, operating at

the baseline 2.5 Gbps data rate and providing faster throughput than the

current 32- and 64-bit PCI bus architectures. There’s no need to switch

to ber optic cable, either: You can run Gigabit speeds over your existing

copper-wire network cable.

And with the easy-to-follow instructions in this manual, you’ll soon be able

to enjoy the benets of these additional features:

• Full duplex speeds (20 Mbps, 200 Mbps, 2000 Mbps)

• Full duplex ow control (IEEE 802.3x)

• Wake-On-LAN (WOL) support

• Supports jumbo frames up to 9 kB

• Realtek chipset

• Lifetime Warranty

System Requirements

Prior to card installation, make sure the following are available:

• Windows 2000/XP/Server 2003/Vista

• ExpressCard-enabled system with an available ExpressCard slot

• Cat5/Cat5E/Cat6 UTP/STP cable

hardwarE installation

Insert the Gigabit Ethernet ExpressCard into the ExpressCard slot of

your system, making sure it’s inserted all the way for a solid connection.

LED STATUS DESCRIPTION

1. 1000/ACT On The port is connecting at

1000 Mbps

Blinking Sending/receiving packets

2. 100/ACT On The port is connecting at

100 Mbps

Blinking Sending/receiving packets

softwarE installation

With the Gigabit Ethernet ExpressCard inserted into the ExpressCard

slot, the computer on and Windows running, the card will be detected by

the system. Simply follow these procedures.

DRIVER INSTALLATION: WINDOWS 2000/XP/SERVER 2003

1. When the Found New Hardware Wizard screen displays, click “Cancel”

to continue the installation.

2. Insert the enclosed driver CD driver in the CD-ROM drive.

3. On the Windows desktop, click “Start,” then “Run.”

4. Enter “D:\ExpressCard\RTL81XXX\setup.exe,” then click “OK.”

NOTE: If needed, change “D:\” to match your CD-ROM drive letter

designation.

5. Follow the remaining on-screen instructions.

6. Restart Windows to complete the installation.

DRIVER INSTALLATION: WINDOWS VISTA

1. Insert the enclosed driver CD driver in the CD-ROM drive.

2. On the Windows desktop, click “Start,” then “Run.”

3. Enter “D:\ExpressCard\RTL81XXX\Vista\setup.exe,” then click “OK.”

NOTE: If needed, change “D:\” to match your CD-ROM drive letter

designation.

4. Follow the remaining on-screen instructions.

5. Restart Windows to complete the installation.

VERIFY DRIVER INSTALLATION

Click on the “Device Manager” tab in System Properties, which you

access from the Windows Control Panel. You should see “Realtek

RTL8168/8111 PCI-E Gigabit Ethernet NIC (Windows 2000/XP/

Server2003” or “Realtek RTL8168C/8111C Family PCI-E Gigabit

Ethernet NIC (NDIS 6.0) (Windows Vista)” installed in the “Network

adapters” list.

NETWORK SETTINGS

1. Click “Network Connection” in the Control Panel to set your network

settings.

2. Right-click the Local Area Connection used by the Gigabit Ethernet

ExpressCard, then select “Properties” from the pop-up menu.

3. Double-click “Internet Protocol (TCP/IP)” to establish your network

settings.

4. Right-click the Local Area Connection used by the Gigabit Ethernet

ExpressCard, then select “Status” from the pop-up menu to conrm

network status.

spECifiCations

Standards

• IEEE 802.3 (Twisted Pair Ethernet)

• IEEE 802.3u (Twisted Pair Fast Ethernet)

• IEEE 802.3ab (Twisted Pair Gigabit Ethernet)

• IEEE 802.3x (ow control, for full duplex mode)

General

• Media support:

- 10Base-T Cat3, 4, 5 UTP/STP RJ-45

- 100Base-TX Cat5 UTP/STP RJ-45

- 1000Base-T Cat5e/6 UTP/STP RJ-45

• Form factor: ExpressCard/34

• Realtek RTL8111C chipset

LEDs

• 100M Link/Activity

• 1000M Link/Activity

Environmental

• Dimensions: 102.3 (L) x 34 (W) x 14.2 (H) mm (4 x 2.9 x 0.6 in.)

• Weight: 24 g (0.9 oz.)

• Operating temperature: 0 – 57°C (32 – 134°F)

• Operating humidity: 10 – 90% RH, non-condensing

• Storage temperature: -20 – 85°C (-4 – 185°F)

Package Contents

• Gigabit Ethernet ExpressCard

• Driver CD

• User manual

INTELLINET NETWORK SOLUTIONS™offers a complete line

of active and passive networking products.

Ask your local computer dealer for more information or visit

www.intellinet-network.com.

SOLUTIONS

All products mentioned are trademarks or registered trademarks of their respective owners.

Andere Handbücher für 524056

Inhaltsverzeichnis

Andere Intellinet Computerhardware Handbücher

Intellinet

Intellinet 524056 Bedienungsanleitung

Intellinet

Intellinet 150057 Bedienungsanleitung

Intellinet

Intellinet 550512 Bedienungsanleitung

Intellinet

Intellinet 524056 Bedienungsanleitung

Intellinet

Intellinet 524544 Bedienungsanleitung

Intellinet

Intellinet 505314 Bedienungsanleitung

Intellinet

Intellinet 524070 Bedienungsanleitung

Intellinet

Intellinet 524070 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung