Intellinet 523929 Bedienungsanleitung

Fast

EthErnEt

OFFicE

switch

usEr

manual

MODEL 523929

INT-523929-UM-1107-01

intrOductiOn

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS

™

Fast Ethernet Ofce Switch, Model 523929.

This 24-port rackmount device is a high-performance 10/100 Mbps LAN

switch with auto-sensing and auto negotiation on every port. The space-

saving, cost-effective design allows you to connect up to 24 devices to

your local area network while only taking up one slot in your network

rack or cabinet. The two Gigabit combo ports let you connect other

switches using RJ45 ports or SFP modules.

Easy-to-follow instructions make installation of the switch quick and simple,

so you’ll also soon be enjoying the benets of these additional features:

FCC Warning

This device has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This

equipment generates, uses and radiates radio frequency energy and, if

not installed and used in accordance with the user manual, may cause

interference, which the user will be required to correct at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to take

adequate measures to correct.

INTRODUCTION

• Supports NWay auto-negotiation

• Store and forward switching

architecture

• Full/half duplex operation

• Supports 802.3x ow control for

full duplex mode and collision-

based backpressure for half

duplex mode

• Wire-speed packet ltering and

forwarding rate

• Supports up to 8192 MAC address

entries

• 320 kBytes buffer memory

• Included 19” rackmount brackets

• Lifetime Warranty

CONNECTIONS/INDICATORS

cOnnEctiOns & indicatOrs

LEDs

The front panel LED indicators

provide at-a-glance network

status and real-time connectivity

info, as detailed in the chart

below. NOTE: The mini-GBIC

slots share

LEDs with

the Gigabit

RJ-45

(copper)

ports:

25X/26X.

Port LED Status Operation

Power Green The switch is on.

10/100 Link/ Green Valid port connection.

Mbps ACT Blinking Data is being transmitted/received.

Off Port is disconnected.

10/100/ 1000M Green Valid port connection at 1000 Mbps.

1000 Blinking Data is being transmitted/received.

Mbps Off Port’s disconnected or connected at 10/100 Mbps.

100M Green Valid port connection at 100 Mbps.

Blinking Data is being transmitted/received.

Off Port’s disconnected or connected at 10/1000 Mbps.

10M Green Valid port connection at 10 Mbps.

Blinking Data is being transmitted/received.

Off Port’s disconnected or connected at 100/1000 Mbps.

Ports

The auto-negotiation feature of the Fast Ethernet Ofce Switch allows

ports to operate in the following modes. NOTE: With the Gigabit ports,

when both the ber and copper interfaces are connected, the system

adopts the ber interface and disables the corresponding copper port

automatically.

Power

To turn the switch on, connect the female end of the included power cord

to the receptacle on the rear panel and then plug the cord into an AC

outlet. Check that the Power LED is lit on the front panel.

installatiOn

The Fast Ethernet Ofce Switch can be placed on a desktop (or other

appropriate at surface) or mounted in a rack. Prior to installation,

check that:

• the device will have adequate ventilation. A minimum clearance of 25 mm

(1 inch) on all sides is recommended.

• the location is fairly cool and dry. (See Specications for the acceptable

temperature and humidity operating ranges.)

• the location is free from electrical noise from radios, transmitters,

broadband ampliers and such.

INSTALLATION

Port Media Speed Duplex Mode

10/100 Mbps 10/100 Mbps RJ-45 (copper) 10 Mbps Full

Half

100 Mbps Full

Half

10/100/1000 Mbps 10/100/1000 Mbps (copper) 10 Mbps Full

Half

100 Mbps Full

Half

1000 Mbps Full

1000 Mbps (ber — mini-GBIC 1000 Mbps Full

required)

Desktop Placement

• Afx the provided rubber pads to the bottom of the switch to protect it

from scratches and prevent slipping.

• Make sure the surface can support the weight of the switch.

• Position the switch for easy and secure access to AC power.

Rackmounting

• Disconnect any cords and cables attached to the switch.

• Place the device right-side up on a at, sturdy surface with the front

panel facing you.

• Position one of the included mounting brackets over the corresponding

holes on either side of the device.

• Insert and fully tighten the included screws.

• Attach the second bracket in the same manner.

• Place the switch in the rack and secure with suitable screws (not

included).

• Reconnect the cords and cables as needed.

Cables

All ports on the Fast Ethernet Ofce Switch support Auto-MDI/MDI-X:

Either straight-through or crossover cables can be used to connect the

switch with PCs, other switches, hubs, routers and other devices.

Use Category 3,4,5 or 5e UTP/STP cable to ensure valid connections

and to obtain/maintain optimal performance. Appropriate cables

corresponding to different transmitting/receiving speeds are required,

as indicated in the following table.

INSTALLATION

Media Speed Wiring

10/100 Mbps copper 10 Mbps Cat3/4/5 UTP/STP

100 Mbps Cat5 UTP/STP

10/100/1000 Mbps copper 10 Mbps Cat3/4/5 UTP/STP

100 Mbps Cat5 UTP/STP

1000 Mbps Cat5/5e UTP/STP

1000 Mbps ber (mini-GBIC 1000 Mbps Cable type varies depending on

required the mini-GBIC selected.

spEciFicatiOns

SPECIFICATIONS

Standards

• IEEE 802.3 (10Base-T Ethernet)

• IEEE 802.3ab (Twisted Pair

Gigabit Ethernet)

• IEEE 802.3u (100Base-TX Fast

Ethernet)

• IEEE 802.3x (ow control, for full

duplex mode)

• IEEE 802.3z (1000Base-SX/LX/

LHX)

General

• Media support:

- 10Base-T Cat3, 4, 5 UTP/STP

RJ-45

- 100Base-TX Cat5 UTP/STP

RJ-45

- 1000Base-T Cat5e UTP/STP

RJ-45

- Fiber: dependent on mini-GBIC

types

• Packet lter/forwarding rate:

- 1,488,000 pps (1000 Mbps)

- 148,800 pps (100 Mbps)

- 14,880 pps (10 Mbps)

• Buffer memory: 320 kBytes

• MAC address table: 8192 entries

• Backplane speed: 8.8 Gbps

• Switch architecture: store and

forward

• Ports

- 24 x RJ-45 Fast Ethernet ports

- 2 RJ-45 Gigabit ports

- 2 SFP mini-GBIC transceiver

module slots

• Certications: FCC Class A, CE

Mark, VCCI Class A

LEDs

• Power

• Link Speed per port: 10/100/1000

Mbps

• Link/Activity per port

Power

• Internal power supply, 100 – 240 V

AC, 50/60 Hz

• Power consumption: 13.65 Watts

(maximum)

Environmental

• Metal housing, 19” rackmount, 1 U

• Dimensions: 440 (W) x 130 (L) x

44 (H) mm (17.4 x 5.1 x 1.7 in.)

• Weight: 2.3 kg (5.1 lbs.)

• Operating temperature: 0 – 40°C

(32 – 104°F)

• Operating humidity: 10 – 90% RH,

non-condensing

• Storage temperature: -20 – 70°C

(-4 – 158°F)

Package Contents

• Fast Ethernet Ofce Switch

• Power cable

• 19” rackmount brackets

• User manual / quick install guide

INTELLINET NETWORK SOLUTIONS™offers a complete line

of active and passive networking products.

Ask your local computer dealer for more information or visit

www.intellinet-network.com.

SOLUTIONS

All products mentioned are trademarks or registered trademarks of their respective owners.

Andere Handbücher für 523929

Inhaltsverzeichnis

Andere Intellinet Schalten Handbücher

Intellinet

Intellinet 524063 Bedienungsanleitung

Intellinet

Intellinet 523547 Bedienungsanleitung

Intellinet

Intellinet 561877 Bedienungsanleitung

Intellinet

Intellinet 560764 V1 Series Bedienungsanleitung

Intellinet

Intellinet 561822 Bedienungsanleitung

Intellinet

Intellinet 506441 Bedienungsanleitung

Intellinet

Intellinet 524117 Bedienungsanleitung

Intellinet

Intellinet 522618 Bedienungsanleitung

Intellinet

Intellinet 502931 Bedienungsanleitung

Intellinet

Intellinet 561228-V2 Bedienungsanleitung

Intellinet

Intellinet 560641 Bedienungsanleitung

Intellinet

Intellinet 503433 Bedienungsanleitung

Intellinet

Intellinet 560801 Bedienungsanleitung

Intellinet

Intellinet IPS-6GM02-60W Bedienungsanleitung

Intellinet

Intellinet 560542 Bedienungsanleitung

Intellinet

Intellinet 505710 Series Bedienungsanleitung

Intellinet

Intellinet 561068 Bedienungsanleitung

Intellinet

Intellinet 560856 Bedienungsanleitung

Intellinet

Intellinet 524100 Bedienungsanleitung

Intellinet

Intellinet 561754 Bedienungsanleitung

Intellinet

Intellinet 561686 Bedienungsanleitung

Intellinet

Intellinet 524513 Bedienungsanleitung

Intellinet

Intellinet 501620 Bedienungsanleitung

Intellinet

Intellinet 522618 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung