Intellisystem IT-VCHD1600JSE Bedienungsanleitung
1
Contents
1 Notes...........................................................................................................................2
2 Main Features.............................................................................................................2
3 Standard Accessories..................................................................................................3
4 Camera Description....................................................................................................3
5 OSD Menu Operation.................................................................................................4
6 Equipment Setup and internet connection..................................................................8
7 Maintenance and troubleshooting.............................................................................14
8 Fault phenomenon and processing ...........................................................................14
9 Standard Specification..............................................................................................15
10 Dimension ..............................................................................................................16
11 Copyright Notice ....................................................................................................17
2
1 Notes
Electric Safety
Installation and operation must accord with electric
safety standard.
Caution to transport
Avoid stress, vibration and soakage in transport,
storage and installation.
Polarity of power supply
The power supply of the product is +12V, the max
electrical current is 2A .Polarity of the power
supply plug drawing as follows.
Careful of installation
Do not grasp the camera head when carrying the
camera. Don’t turn camera head by hand. Doing so
may result in mechanical damage.
Never power on before installation is not completed.
Don’t dismantle the camera
We are not responsible for any unauthorized
modification or disassemble.
CAUTION!
The specific frequency of electromagnetic field
may affect the image of the camera!
2 Main Features
H.265 Support
Support H.265 encoding, enabling full HD
1080p/60fps video stream by ultra-low bandwidth,
lag-time within 200ms.
1080P Full HD
Apply Panasonic's 1/2.7 inch, 2.07 million
effective pixels high quality HD CMOS sensor, can
reach maximum 1920 x 1080 high resolution and
achieve quality image.
Double Interface
Support 3G-SDI interface, effective transmission
distance up to 150 meters (under 1080p30). SDI,
Network can output at the same time.
Ultra-high Frame Rate
The output frame rate up to 60fps in 1080P.
AAC Audio Encoding
Support AAC audio encoding, better sound quality
and smaller bandwidth.
Low-light
High SNR of CMOS sensor combined with 2D and
3D noise reduction algorithm, effectively reduce
the noise, even under low illumination conditions,
picture can still keep clean and clear.
PoE(optional)
Support PoE (802.3af), effectively reduce the cost
of engineering and routing.
3
ICR Infrared Filter
ICR filter with auto switch, keep watch over day and
night.
SDK
Support SDK, easy to implement the custom
requirement
3 Standard Accessories
When opened the package, please check and confirm
that all attachments shall be provided:
HD Color Box Camera x1
The user manual x1
Certificate/warranty card x1
4 Camera Description
Camera appearance
1. Lens focal adjustment after fixed screw holes
2. Lens mounting position (only for C / CS lens *)
3. Aperture control interface (only applicable
DC automatic aperture)
4. The installation location hole
5. Fuselage
Operating tips
Both sides threaded hole is consistent with the
positioning hole size, installation can be used instead
of each other.
Notice
Use C camera lens, you need to use special adapter
ring.
The back of the interface specifications
1. DC 12V power interface
2. Power light
3. Six spring terminals
4
Specific function shown in the table below:
Serial number
function
a
RS 485-
b
RS 485+
c
Alarm input 1
d
Alarm input 2
e
Alarm output 1
f
Alarm output 2
4. MENU key
Move MENU key up and down or so, in order to select
the MENU options. Press down for selected.
5. LINE OUT key
6. CF Card
7. LINE IN key
8. Internet port
9. 3G-SDI interface
Operating tips
Press "MENU" button and then to electricity and keep
holding down the "MENU" button 5 seconds, the
camera will restore factory Settings.
5 OSD Menu Operation
Key Description
The camera uses one buttons, around the menu button,
logo【 】up and down, logo【 】 left and right;
Under normal image press "MENU" key, the screen
displays the main menu, toggle【 】, from top to
bottom cycle options menu item and press select menu
options, use a scroll arrow or highlight the selected
item, press menu button to highlight the menu item;
Each menu page has a "Return" option, to Return to
the superior menu or exit the menu.
MENU(Main Menu)
Directly press "MENU" button to enter the main menu.
Operating tips
Toggle the buttons up and down【 】Choose a menu
item, press MENU to enter submenu.
Choose [Exit] press MENU button to exit menu.
MENU
Exposure
Color
Image
Focus
Noise Reduction
Setting
Information
Restore Factory Settings
Exit
5
EXPOSURE
Operating tips
Mode: Set the camera exposure mode, Optional items:
Full Auto, WDR, Shutter, Priority, and Bright.
Shutter: Set the Shutter values, only when the Mode
for the Shutter Priority Mode and Manual Mode
effective, Optional items: 1/10000s, 1/6000s,
1/4000s,1/3000s,1/2000s,1/1500s,1/1000s,1/725s,1/5
00s,1/350s,1/250s,1/200s,1/125s,1/100s,1/90s,1/60s,
1/30s.
Gain Limit: Set the Gain value, Optional items: 0 ~ 15.
Bright: Set the brightness values, only when the
effective Mode for Bright Mode, Optional items: 0 ~
17.
ExpCompMode: Set the exposure Compensation
mode, can be installed: On, Off.
ExpComp: Set the exposure compensation value, only
when ExpCompMode item to On effective, Optional
items: -7 ~ 7.
Backlight: Set the backlight compensation, Optional
items: On, Off.
DRC Strength: Set up digital wide dynamic strength,
can set up different levels of wide dynamic effect,
Optional items: 0 ~ 8.
Anti Flicker: Set the flashing function, Optional items:
50Hz, 60Hz, Off.
Lens: Optional items: Manual, DC.
Return: get back
COLOR
Operating tips
WB Mode: Set the camera white balance mode,
Optional items: Auto, 3000K/Indoor, 4000K,
5000K/Outdoor, 6500K-1, 6500K-2, 6500K-3, One
Push, Manual.
EXPOSURE
Mode Full Auto
ExpCompMode On
ExpComp -1
Gain Limit 3
Backlight Off
DRC Strength 3
Anti Flicker 50Hz
Lens Manual
Return
COLOR
WB Mode Auto
AWB sens Low
RG Tuning 2
BG Tuning -1
Saturation 100%
Hue 7
Return
6
R Gain: Adjust the camera white balance mode of red
gain, Optional items: 0 ~ 255（Effective only in WB
Mode is Manual).
B Gain: Adjust the camera white balance mode of blue
gain, Optional items: 0 ~ 255（Effective only in WB
Mode is Manual).
RG Tuning: Red gain fine-tuning, Optional items: -10
~ +10（Effective only in WB Mode is Auto）
BG Tuning: Blue gain fine-tuning, Optional items: -
10 ~ +10（Effective only in WB Mode is Auto）
Saturation: Color saturation adjustment, Optional
items: 60% ~ 200%.
Hue: Chroma adjustment, Optional items: 0 ~ 14.
Return: get back.
IMAGE
Operating tips
Luminance: Brightness adjustment, Optional items:
0~14.
Contrast: Contrast adjustment, Optional items: 0~14.
Sharpness: Sharpness adjustment, Optional items:
Auto, 0~15.
Flip-H: Image flipped horizontally. Optional items:
On, Off.
Flip-V: Image Flip Vertical. Optional items: On, Off.
Gamma: Optional items: Default, 0.45, 0.5, 0.56, 0.63
Style: Optional items: Norm, Clarity, Bright, Soft, 5S
LDC: Optional items: Off, 1-10.
Return: get back.
NOISE REDUCTION
Operating tips
2D NR: 2D noise reduction, Optional items: 1 ~ 5,
Close, Auto.
3D NR: 3D noise reduction, Optional items: 1 ~ 8,
Close.
Return: get back.
IMAGE
Luminance 7
Contrast 7
Sharpness 2
Flip-H Off
Flip-V Off
Gamma Default
Style Bright
LDC Off
Return
NOISE REDUCTION
2D NR 3
3D NR 3
Return
7
SETTING
Operating tips
Language: Language Settings, Optional items:
English, Chinese.
Protocol: Communication protocol Settings, Optional
items: VISCA, PELCO-D, PELCO-P.
VISCA Address: Address of the Visca Settings,
Optional items: 0 ~ 7.
P-D Address: P-D address settings, valid in PELCO-
D mode, Optional items: 0 ~ 254.
P-P Address: P-P address settings, valid in PELCO-P
model, Optional items: 0 ~ 31.
Baudrate: Camera baud rate settings, Optional items:
38400, 19200,9600,4800,2400.
Video Format: Camera video format settings,
Optional items: 1080P25, 1080P30, 1080P5, 1080P60,
1080I60, 1080I50, 720P50, 720P60.
EPTZ: Optional items: On, Off.
Zoom Limit: Optional items: 8x, 4x, 3x, 2x, 1.5x
Return: get back.
INFORMATION
RESTOREFACTORY SETTINGS
Operating tips
Yes: verify, press MENU to restore factory Settings.
No: cancel, press MENU to back to menu.
Return: get back.
SETTING
Language English
Protocol VISCA
VISCA Address 1
Baudrate 9600
Video Format 1080P30
EPTZ Off
Return
Information
Verion 7.2.02
Model O9.V
Data 2016-09-08
IP 192.168.100.99
Gateway 192.168.100.1
Netmask 255.255.255.0
Return
RESTORE FACTORY SETTINGS
Yes
No
Return
8
6 Equipment Setup and internet
connection
1Operating Environment
Operating System: Windows
2000/2003/XP/vista/7/8/10
Network Protocol: TCP/IP
Client PC: P4/128MRAM/40GHD/ support scaled
graphics card, support DirectX8.0 or more advanced
version.
2Equipment Installation
1) Connect internet camera to your internet or to your
PC directly via internet cable.
2) Turn on DC12V power.
3) The orange light of internet port lit on, green light
flashing, and the physical connection finished.
3Internet Connection
Connection ways between internet camera and
computer, as picture 1.1 and picture 1.2 shown:
Picture 1.1 connect by internet cable
Picture 1.2 Connect by router /interchanger
4IP camera visited/ controlled by LAN
4.1 Setup IP address
IP camera default IP address"192.168.100.88",
Unknown camera IP, view as below:
Method 1: connect camera to TV, press [menu] of the
behind camera, select "Information", the camera IP
will be show on screen.
Method 2: connect camera to PC with Ethernet cable,
use "upgrade_En.exe" to search for IP address.
Change IP address, 2 methods as below:
Method 1: On web control page, find "Network"--
->Change IP---->Click "Apply"---->
Restart camera
9
Method 2: Open "upgrade_En.exe", change IP and
click "Set".
NOTE!
IP camera default IP address"192.168.100.88", user
"admin", password "admin". After modified, IP
Camera be restart.
4.2 Visit/Access IP Camera
Input http://192.168.100 to IE (better with IE web
browser, others will cause little latency), a login
window pop up, input login name: admin, password:
admin, shown as below:
After login shown as below:
NOTE！
If user first time use this camera by internet (only for
new user), must install a player software (VLC).
Please go to VLC webside
http://www.videolan.org/vlc, download and Install
VLC (player software).After installation, login again,
will show as above:
5IP Camera accessed/controlled by WAN(internet)
5.1 Setup IPC accessed/controlled by dynamic DNS
2 dynamic DNS available:
Dyndns.org,
3322. Org
Router Port Mapping:
Take TP-LINK router for example, enter
Router Home Page (interface page),select "Transit
control"- "Transit rule"--"Virtual server"--"Virtual
service" ,add a new port number in "Outside Port",
add a new port number in "inside port", put camera IP
address to "IP address", then select "Apply" and
Inhaltsverzeichnis
