Intellisystem ThermalTronix TT-CXS-DVACS Bedienungsanleitung

ThermalTronix

TT-CXS-DVACS

Thermal Camera Specifications

User Manual

Restriction

Intellisystem Technologies shall reserve copyright of document. Under no circumstances, this

document shall be reproduced, distributed or changed, partially or wholly, without formal

authorization of Intellisystem Technologies.

Disclaimer

Intellisystem Technologies makes the best to verify the integrity and correctness of the contents

in this document, but no formal guarantee shall be provided. Use of this document and the

subsequent results shall be entirely on the user's own responsibility. Intellisystem Technologies

shall have the right to change the contents of this manual without prior notice for the purpose of

enhanced performance.

Warranty

If the product does not operate properly in normal conditions, please let us know. Intellisystem

Technologies will resolve the problem for free of charge. The warranty period is 1 years. However,

the followings are excluded:

If the system behaves abnormally because you run a program irrelevant to the system

operation.

Deteriorated performance or natural worn-out in process of time.

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

Warnings

Please avoid aiming the lens at extreme high temperature radiation source, such as the sun,

molten steel or laser in any situation; otherwise the detector may be damaged.

Please do not touch the lens to avoid contaminating and damaging. Please pay attention to

protect the lens to avoid causing abrasion, scratches even breaches, otherwise, it will affect

the device performance badly, even damage the device.

This device is a precise optoelectronic product. Please protect it properly during usage,

storage and transportation, where improper use (such as drop and collision) will cause

damage to the device.

Make sure that the power control connection is reliable. If the power control wire is in bad

connection, it will damage the device.

Ensure the proper connection of power control cable and data cable. Wrong connection may

cause damage to the device.

Do not swag fiercely or collide the device during transportation, otherwise it will cause

performance-reduction and even damage to it.

If the product works abnormally, please contact the dealer or the nearest after-sale service center.

Please do not dismantle or replace it in any manners.

Contents

1INTRODUCTION............................................................................................................................4

1.1 FEATURES........................................................................................................................................4

1.2 INCLUDED .......................................................................................................................................5

2 COMPONENT NAMES AND FUNCTIONS........................................................................................5

2.1 DEVICE APPEARANCE ............................................................................................................................5

2.2 CONNECTOR DEFINITION .......................................................................................................................6

3OPERATION GUIDE .......................................................................................................................6

3.1 COMMUNICATION PARAMETERS..............................................................................................................6

3.2 OPERATION KEY GUIDE..........................................................................................................................7

3.3 THERMAL IMAGING CAMERA MENU.........................................................................................................8

4CHANGE ADDRESS...................................................................................................................... 11

4.1 CHANGE THE ADDRESS OF PT SYSTEM ....................................................................................................12

4.3 CHANGE THE ADDRESS OF VISUAL CAMERA..............................................................................................13

4.4 CHANGE THE ADDRESS OF PROTOCOL BOARD ...........................................................................................14

5TROUBLESHOOTING ................................................................................................................... 16

6TECHNICAL SPECIFICATIONS ....................................................................................................... 17

1Introduction

TT-CXS-DVACS is composed of uncooled infrared thermal imaging module and visible light

camera, which can be applied in the following fields: long-range seaports, border, airport;

middle-range power stations, public places; short-range gate of entry and exit, equipment storage

sites; day and night to monitor people, vehicles, and ships and so on.

1.1FEATURES

Thermal Camera

1) Manual calibration

2) Start-up auto calibration

3) Manual brightness and gain adjustment

4) User configuration settings

5) User configuration settings

6) Image Noise Reduction function, reduce Image background noise

7) Image enhancing function : enhance the ability to detect small object

CCD Camera

1) With the state-of-the-art digital signal processing technology, full digital image

processing and special algorithm of 600-line high resolution implemented.

2) High Sensitivity: It implements images of high sensitivity using the up-to–date

Super-HAD IT CCD.

3) High performance surveillance camera, equipped with X25 zoom lens and digital zoom

IC, enabling monitoring up to 400 times.

PTZ

1) Preset：80 presets can be setup

2) Support 0°~360°(pan) continuous rotation

3) Top load of tilt is ±90°

1.2 INCLUDED

TT-CXS-DVACS List for accessories and files：

accessory

quantity

remark

Pan-tilt

AC24 Power Adapter

User manual

Packing list

qualification

2 Component names and functions

2.1 Device appearance

Fig. 1

No.

Description

Remark

Thermal housing

Thermal camera

Rear cover

CCD housing

Include CCD camera and protocol board

DIP switch cover

definition refers to chapter 4.2

Wire hole

used to connect power supply, monitor and keyboard

control

2.2 Connector definition

The control wire is from bottom of PT system.

Definition as follows:

No.

Description

Remark

RS485

RS485+

RS485-

CCD Video

Analog video output of CCD camera

IR Video

Analog video output of thermal imaging camera

AC24V

Power supply

3OPERATION GUIDE

3.1 Communication parameters

Thermal camera default address：PELCO-D、baud 9600、address 2

PT system default address：PELCO-D、baud 9600、address 1

Visual camera default address：PELCO-D、baud 9600、address 1

Protocol board address：PELCO-D、baud 9600、address 1

3.2 Operation key guide

3.2.1 Thermal camera control key description

Before operate thermal camera, please set address 2 firstly.

Operational keys

Function

PTZ up

Down

PTZ down

Left

PTZ left

Right

PTZ right

LENS-

Enter the menu* or move the

cursor from up to down

LENS+

Manual calibration

FOCUS-

1. When there is no menu, near

Focus

2. when there is a menu, modify

the option or reduce the value

FOCUS+

1. When there is no menu, far

Focus

2. when there is a menu, modify

the option or increase the value

ZOOM-

Auto focus

ZOOM+

Activate the setting menu

3.2.2 CCD camera keys description

Before operate, set address 1 firstly

Operational keys

Function

PTZ up

Down

PTZ down

Left

PTZ left

Right

PTZ right

FOCUS-

Near Focus

FOCUS+

Far Focus

ZOOM-

Zoom out

ZOOM+

Zoom in

3.3 Thermal imaging camera menu

Before operate thermal camera, please set address 2 firstly.

3.3.1 Main menu

Trigger『LENS-』to go to main menu, shown as Fig. 2：

Fig.2

When the menu pops-up, trigger the 『LENS-』to move the cursor , use『FOCUS+』and 『FOCUS-』

to modify the values or options. When you exit the menu, parameters automatically are saved.

Auto: XXX Display the current image auto mode. Three options:

0: manual gain, manual brightness;

1: manual gain, auto brightness;

2: auto gain, auto brightness;

Mode: XXX Display the current image mode. There are 10 options, where 0 and 1

are fixed factory default settings and 2-9 are user-defined settings.

0: Suitable for observation of big-object under good weather condition

1: Suitable for observation of target within sky-line under good weather

condition

2～9: User-defined based on different practical occasions.

Note: when Auto 0 and 1, Mode X cannot be adjusted; when Auto 2, Mode X can be

adjusted.

G: XXX Gain value, range: 0-255

B: XXX Brightness value, range: -2048-+2048

P: XXX White/black hot display mode

0: black hot 1: white hot

Z: XXX Zoom status

1: No zoom 2: 2X

E: XXX Image enhancement status

Y: on N: off

C: XXX Display the crosshair or not.

Exit: Exit crosshair menu. Press MENU button to select the Exit option and press UP

button to exit the menu.

Note: When exiting the main menu, any change will be saved automatically and will also be used

when restarting next time.

3.3.2 System menu

When there is no menu ,press 『ZOOM+』to activate the system menu

You need to input password when go to system menu, the password is『LENS-』『 LENS +』『FOCUS

+』『 FOCUS-』『LENS-』『 LENS+』. With the correct password, you will come to the system menu

shown as Fig. 3：

Fig. 3

Trigger『LENS-』and move the cursor, use『FOCUS+』and『FOCUS-』to modify the values or options.

When you exit the menu, parameters will automatically be saved.

1、Com：XXX use『FOCUS+』and 『FOCUS-』to go to internal menu to setup

Com: Mode: AF: RS: Video: Protect: Alarm: Recover: Exit:

Inhaltsverzeichnis

Andere Intellisystem Wärmebildkamera Handbücher

Intellisystem

Intellisystem ThermalTronix TT-607FG-HTI Bedienungsanleitung

Intellisystem

Intellisystem ThermalTronix TT-1040S-UTCM Bedienungsanleitung

Intellisystem

Intellisystem ThermalTronix TT-1060MD-FTM Series Bedienungsanleitung

Intellisystem

Intellisystem ThermalTronix TT-L-UTCM Series Bedienungsanleitung

Intellisystem

Intellisystem ThermalTronix TT-1100B-UTCM Bedienungsanleitung

Intellisystem

Intellisystem ThermalTronix TT-L-BFTC Series Bedienungsanleitung

Intellisystem

Intellisystem ThermalTronix TT-J Series Bedienungsanleitung

Intellisystem

Intellisystem ThermalTronix TT-MDL-A-SDA Series Bedienungsanleitung

Intellisystem

Intellisystem ThermalTronix TT-CXL-DVACS Series Bedienungsanleitung

Intellisystem

Intellisystem ThermalTronixTT-G2F-HTI Series Bedienungsanleitung

Intellisystem

Intellisystem ThermalTronix TT-1007D MARINE Bedienungsanleitung

Intellisystem

Intellisystem ThermalTronix TT-1T80-HTI Bedienungsanleitung

Beliebte Wärmebildkamera Handbücher anderer Marken

Hikmicro

Hikmicro B20 Bedienungsanleitung

FLIR

FLIR E-EST Series Bedienungsanleitung

FLIR

FLIR M-Series Bedienungsanleitung

BST

BST BT-72 Bedienungsanleitung

CBC

CBC EN7-S02T Bedienungsanleitung

Satir

Satir YRH600 Bedienungsanleitung

TESTO

TESTO 882 Bedienungsanleitung

TECPEL

TECPEL TIG-320 Bedienungsanleitung

SKF

SKF TKTI 21 Bedienungsanleitung

TESTO

TESTO 885 Bedienungsanleitung

InfiRay

InfiRay AT300 Series Bedienungsanleitung

InfiRay

InfiRay AT Series Bedienungsanleitung

FLIR

FLIR X6530sc Series Bedienungsanleitung

Videotec

Videotec MAXIMUS MVXT Bedienungsanleitung

Guide Sensmart

Guide Sensmart D384M Bedienungsanleitung

NBN

NBN FLIR A6 Series Bedienungsanleitung

WORKSWELL

WORKSWELL SAFETIS Bedienungsanleitung

Major tech

Major tech MTi11 Bedienungsanleitung