Intergraph InterServe 9000 Bedienungsanleitung

DHA031531, 09/99

InterServe 9000

Late-Breaking News

Hardware

Mouse

If your systemwas delivered with a three-button Primax mouse, you maysee a message that says

“MouseWare has detected a newWheel Mouse....” and asks ifyou want to configure the new

device. If this happens, select No. If you experience anyother anomalies while using the Primax

mouse, reinstall the mouse driver found on the Windows NT software CD-ROM.

If your systemwas delivered with a Logitech wheel mouse, you can find information on using it by

right-clicking the mouse icon in the taskbar tray, or bygoing to Start/Settings/Control Panel/Mouse

and clicking Help in the toolbar. If the wheel on the mouse does not function, or if you experience

anyother anomalies while using the wheel mouse, install the LMOUSE driver software fromthe

Intergraph SystemCD using InterSite Version Manager.

Mylex AcceleRAID 250 and Adaptec SCSI Controllers

Ifyour systemuses the Mylex AcceleRAID 250 RAID controller and an Adaptec 2940UW

controller, or other Adaptec controllers that include a BIOS, you mayget an error message during

systemstartup that there is not enough free space for the Adaptec controller expansion ROM. If

this occurs, you should disable the expansion ROM for the RAID controller which is not connected

to the systemboot device.

To disable the Adaptec Expansion ROM:

1. Start the system, and when prompted to configure the Adaptec controller, press CTRL+ A.

2. Select “Configure/ViewHost Adapter Settings” and press ENTER.

3. Select “Advanced Configuration Options” and press ENTER.

4. Select “Host Adapter BIOS (Configuration UtilityReserves BIOS Space)” and press ENTER.

5. Press ESC until prompted to save the changes.

6. Save the changes and press ESC to exit fromthe BIOS. The systemwill restart.

To disable the Mylex Expansion ROM:

1. Start the system, and when prompted to configure the Mylex controller, press ALT + M.

2. At the first screen, select “BIOS Enabled” and press ENTER.

3. Press anykeyto save the change and exit fromthe BIOS. The systemwill restart.

Processor Retest

The system’s BIOS has been seen to misinterpret the number of processors in the system. If the

BIOS loses track of the number of processors in the system, it may report a smaller number of

processors than what exists. If this occurs, run a processor retest in the BIOS:

1. Start the system, and during the boot sequence press F2 to enter Setup.

2. Go to the SERVER menu and highlight Processor Retest.

3. Press the space bar to change the option to Yes.

4. Press F10 to save the change and exit from the BIOS.

5. Press ENTER to confirm and reboot. Verify that the BIOS finds all processors during boot.

Operating System Support for USB Peripherals

Your system includes a Universal Serial Bus (USB) port to which you can connect USB

peripherals. Windows NT 4.0 does not currently support USB peripherals. Microsoft will add

support for USB peripherals to a future Windows NT release.

Documentation Errata

On page 13, Figure 3, the front panel LEDs (top to bottom) should be listed as power,

sleep/service, disk drive activity, power supply failure, and fan failure.

On page 87, Figure 25, the six PCI slots (top to bottom) should be listed as B4, B3, B2, B1, A3,

and A2.

Software

Installing Intel Server Control (ISC) Software

Intel Server Control (ISC) is the InterServe 9000 onboard instrumentation software, which must be

installed to view instrumentation data. Before running ISC, you must install Internet Explorer 4.01

(or later); you can get this from the Windows NT 4.0 Option Pack CD delivered with your system.

See the system software CD for complete ISC installation and operation instructions.

Rebuilding System Software with SYSBUILDER and the System CD

If your system was delivered with a SYSBUILDER diskette, you can use it and the System CD to

rebuild system software. Follow the instructions provided with the System CD to reinstall the

operating system and associated system software. The System CD’s instructions replace the

operating system installation instructions in your system’s documentation.

Reinstalling Windows NT Server

If you must reinstall the operating system, Windows NT Server may not install properly if you start

the system from the Setup CD; you must start the system from the Setup diskettes.

If you must reinstall Window NT Server 4.0 and your system has more than 3 GB of memory, be

sure to see Chapter 5 of the System Setup before you start.

and trademark law. This document may not, in whole or in part, be reproduced in any form or by any means, or be used to make any

derivative work, without written consent from Intergraph Computer Systems.

Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subdivision (c)(1)(ii) of the

rights in technical data and computer software clause at DFARS 252.227-7013. Unpublished rights are reserved under the copyright

laws of the United States.

Intergraph Computer Systems, Huntsville AL 35894-0001

Notice

Information in this document is subject to change without notice and should not be considered a commitment by Intergraph Computer

Systems. Intergraph Computer Systems shall not be liable for technical or editorial errors in, or omissions from, this document.

Intergraph Computer Systems shall not be liable for incidental or consequential damages resulting from the furnishing or use of this

document.

All warranties given by Intergraph Computer Systems about equipment or software are set forth in your purchase contract. Nothing

stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such

warrantites.

Andere Handbücher für InterServe 9000

Inhaltsverzeichnis

Andere Intergraph Server Handbücher

Intergraph

Intergraph InterServe 800 SL Bedienungsanleitung

Intergraph

Intergraph InterServe 9400 Benutzerhandbuch

Intergraph

Intergraph Rack-Mount Workstation Bedienungsanleitung

Intergraph

Intergraph InterServe 80 SL Bedienungsanleitung

Intergraph

Intergraph InterServe 80 SL Benutzerhandbuch

Intergraph

Intergraph InterServe 80 SL Bedienungsanleitung

Intergraph

Intergraph InterServe 80 SL Benutzerhandbuch

Intergraph

Intergraph InterServe 650 ?anual Benutzerhandbuch

Intergraph

Intergraph InterServe 800 SL Benutzerhandbuch

Intergraph

Intergraph InterServe 9400 Bedienungsanleitung

Intergraph

Intergraph InterServe 9000 Benutzerhandbuch

Intergraph

Intergraph Zx10 5U Stücklistenhandbuch

Intergraph

Intergraph InterServe 8000 Benutzerhandbuch

Intergraph

Intergraph InterServe 80 SL Bedienungsanleitung

Intergraph

Intergraph InterServe 8400 Setup Benutzerhandbuch

Intergraph

Intergraph InterServe WebScale Bedienungsanleitung

Intergraph

Intergraph InterServe 9000 Benutzerhandbuch

Intergraph

Intergraph InterServe 800 SL Bedienungsanleitung

Intergraph

Intergraph InterServe 90 Benutzerhandbuch

Intergraph

Intergraph InterServe 600 Series Benutzerhandbuch

Intergraph

Intergraph InterServe 800 SL Bedienungsanleitung

Intergraph

Intergraph InterServe 90 Bedienungsanleitung

Intergraph

Intergraph Rack-Mount Workstation/Server Benutzerhandbuch

Intergraph

Intergraph InterServe 9400 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung