Intermec Apriva BT200-T Bedienungsanleitung
Apriva BT200-T
Smart Card Reader
CN4G, CN4eG, CK61G
User’s Guide
ii Apriva BT200-T Smart Card Reader User’s Guide
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to
operate and service Intermec-manufactured equipment and is not to be released, reproduced, or
used for any other purpose without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior
notice and do not represent a commitment on the part of Intermec Technologies Corporation.
© 2009-2010 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar,
dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license),
Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower,
Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares,
and Vista Powered are either trademarks or registered trademarks of Intermec Technologies
Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patents pending.
Apriva BT200-T Smart Card Reader User’s Guide iii
Document Change Record
This page records changes to this document. The document was
originally released as Revision 001.
Version
Number Date Description of Change
004 9/2010 Updated procedures on how to connect the
Apriva BT200-T to the CN4G and CN4eG.
003 9/2009 Updated procedures on how to install Odyssey
Access Client and Fortress Security Client onto
the CK61G.
002 7/2009 Updated procedures on how to connect the
Apriva BT200-T to the CK61G.
iv Apriva BT200-T Smart Card Reader User’s Guide
Contents
Apriva BT200-T Smart Card Reader User’s Guide v
Contents
Learning About the Apriva BT200-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Understanding the Power Button and LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Checking and Charging the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing and Pairing the SCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Loading the SCR Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Pairing the SCR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Installing Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Installing the AprivaGuard Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Contents
vi Apriva BT200-T Smart Card Reader User’s Guide
Apriva BT200-T Smart Card Reader User’s Guide 7
Learning About the Apriva BT200-T
The Apriva BT200-T Bluetooth Smart Card Reader (SCR) works with
the CN4G, CN4eG, or CK61G Mobile Computer to enable data
sensitive enterprises to have a high level of security for wireless
communication. The SCR provides users with strong identification
and authentication using hard token certificate and private key
policies.
Understanding the Power Button and LEDs
The SCR has a Power button and two status LEDs to tell you the
status of the smart card reader.
Apriva BT200-T Power Button and Status LEDs
Understanding the Status LEDs
Action LED Status Description
You power on the
SCR.
Solid green for a
few seconds
The SCR has a good charge.
Solid red You need to charge the battery.
No LED The battery is completely discharged.
You first insert a
common access
card (initial four
seconds).
Solid green Battery is over 75% charged and is ready
for operation.
Flashing green Battery has between 25% and 75%
charged capacity.
Solid red Battery has less that 25% charge. You
need to charge the battery.
Power button
Status LEDs
8 Apriva BT200-T Smart Card Reader User’s Guide
If the LED is not blinking after you press the Power button, you need
to charge the SCR for 30 or more minutes. After 30 minutes, you need
to check the status of the indicators by inserting a smart card.
Checking and Charging the Battery
The SCR takes approximately 3 hours to charge its internal battery.
You can use the wall charger or a USB cable to charge the SCR.
To check the status of the battery
•Press the Power button and observe the status LEDs. For more
information on the status LEDs, see “Understanding the Power
Button and LEDs” on page 7.
To charge the battery using the wall charger
1Attach the SCR to the wall charger.
2Insert the wall charger into an electrical outlet.
3The green LED turns on indicating that the SCR is charged.
Common access
card has been
inserted for more
than four
seconds.
Flashing green
or red every one
second.
Connection between the mobile
computer and the SCR has been
established, and the SCR is ready for
operation.
You connect the
USB cable.
Solid green SCR is being charged, and cannot be
used.
Note: You can use the SCR when you
are charging with the wall charger, but
you cannot use the SCR when a USB
connection is the main power source.
You remove the
Smart card or
charge cable.
Green and red
flash once
When you press the Power button, the
LED flashes to provide a visual clue
that the SCR has been powered off.
Understanding the Status LEDs (continued)
Action LED Status Description
Apriva BT200-T Smart Card Reader User’s Guide 9
To charge the battery using a USB cable
1Connect the USB adapter to the USB cable, then connect the USB
adapter to the SCR to the port labeled PC.
2Connect the other end of the USB cable to your notebook or
desktop PC. The green LED turns on indicating that the SCR is
charged.
While charging using the USB cable, all smart card operations are
disabled.
Installing and Pairing the SCR
There are five important steps to follow before you can use the
SCR.
To install and pair the SCR
1For the CK61G, upgrade the operating system (OS) and
SmartSystems Platform Bundle (SSPB). For more information, see
the CK61 Mobile Computer User’s Manual.
2Load the SCR software onto the mobile computer.
3Pair the SCR to the mobile computer.
4Install security.
5Install the AprivaGuard software.
Use the following sections to help you install and pair the SCR to your
mobile computer.
Note: If the battery is discharged to the point where you cannot turn
on the SCR, you need to charge, the SCR for 20 to 30 minutes. Once
the SCR has been charged for that amount of time, turn the SCR off
and on again to finish charging.
10 Apriva BT200-T Smart Card Reader User’s Guide
Loading the SCR Software
Use this section to learn how to load the SCR software onto your
mobile computer.
To load the SCR software
1Tap the iConnect icon. The iConnect menu appears.
2If you are installing the SCR software onto the CK61G:
aSelect Enable and make sure that Assured Radio
Deactivation is not checked. The mobile computer restarts
with Assured Radio Deactivation turned off.
bTap OK on the Assured Radio Deactivation screen.
cTap Start > Settings > the Connections tab > Bluetooth. The
Bluetooth Settings screen appears.
dSelect the Turn on Bluetooth check box to enable Bluetooth.
eTap OK to exit the Bluetooth Settings screen.
Andere Handbücher für Apriva BT200-T
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Intermec Kartenleser Handbücher
Intermec
Intermec Apriva BT200-T Bedienungsanleitung
Intermec
Intermec IP2L Bedienungsanleitung
Intermec
Intermec ITRF24501 PRELIMINARY EDITION Bedienungsanleitung
Intermec
Intermec IF2 Bedienungsanleitung
Intermec
Intermec IF2 Bedienungsanleitung
Intermec
Intermec IP2L Bedienungsanleitung
Intermec
Intermec AR5 Bedienungsanleitung
Beliebte Kartenleser Handbücher anderer Marken
Rosslare
Rosslare DR-6255 Bedienungsanleitung
Lindy
Lindy 51541 Bedienungsanleitung
Diapro T?bbi Ürünler
Diapro T?bbi Ürünler Across System Bedienungsanleitung
Johnson Controls
Johnson Controls Kantech tyco ioSmart Bedienungsanleitung
ACS
ACS ACR122L Bedienungsanleitung
Secukey
Secukey S2-MF Bedienungsanleitung
