Intermec CK60 Vehicle Dock Bedienungsanleitung
The Intermec CK60 Vehicle Dock:
• provides power and charges the battery pack for the CK60 Handheld Computer.
• secures CK60 Handheld Computer in dock while vehicle is in motion.
• provides an RS-232 serial connector for serial scanners, printers, and other devices.
• USB A Host connection allows connection of peripheral devices such as keyboards to
the CK60 Handheld Computer.
The CK60 Vehicle Dock shipping box should contain these items:
• CK60 Vehicle Dock
• CK60 Vehicle Dock Quick Start Guide
• Product Warranty Card and Compliance Statement
What You Need
To Install and use the CK60 Vehicle Dock, you need:
• Intermec cabling kits to connect Vehicle Dock to vehicle power source. Your Intermec
sales team will be able to assist you with kit requirements. The Vehicle Dock may be
used with or without an external power connection. Using without a power cable, the
mobile computer is not charged while docked.
• Intermec Vehicle Dock Mounting Kit (p/n: 805-638-001) allows mounting of the vehi-
cle dock in a truck cab or forklift. This mounting kit is specifically selected for use with
the Vehicle Dock and is designed to reduce the amount of vibration transferred to the
mobile computer. Substitution of mounting devices or methods not approved by
Intermect is not recommended.
• Data Cables, as required by your application.
Out of the Box CK60 Vehicle Dock Features
CK60 Handheld Computer
Release button
Handheld computer
holding bay
CK60 Vehicle Dock Front View
protection bumpers
Docking connector
Handheld computer retaining
assembly
CK60 Vehicle Dock Features
Mounting kit attachment
CK60 Vehicle Dock Rear View
location area
Environmental Specifications
Operating Temperature: -20°C to +50°C (-4°F to +122°F)
Storage temperature: -30°C to 70°C (-22°F to +158°F)
Relative Humidity: 5% to 95%
USB Host Micro DB9F Connector Pin Outs
Serial RS-232 DB9M Connector Pin Outs
CK60 Vehicle Dock
Pin Number Signal Name I/O to Computer Description
1 USBH_D- I/O USB Host data negative
2USBH_D+ I/O USB Host data positive
3NC
4NC
5GNDPWR
6NC Ethernet receive negative
7NC
8NC
9 VBUS PWR PWR_OUT to power USB peripherals
Shell C-GND PWR Chassis Ground
Pin Number Signal Name I/O to Computer Description
1 DCD I RS-232 Data carrier detect
2RXD IRS-232 Receive data
3 TXD O RS-232 Transmit data
4DTR ORS-232 Data terminal ready
5 GND PWR Signal Ground
6DSR IRS-232 Data set ready
7 RTS O RS-232 Request to send
8CTS IRS-232 Clear to send
9 POWER PWR 5 volts @ .5 Amps 2.5 Watts
Shell C-GND PWR Chassis Ground
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Vehicle Dock Quick Start Guide
*
930-006-001*
P/N 930-006-001
Quick Start Guide
Installing Your CK60 Vehicle Dock
1Install Vehicle Dock and Mounting Kit to your vehicle in a location that is conve-
nient to the operator but does not interfere with vehicle operation or operator
safety. See instructions included with Mounting Kit for details.
2Connect power cable to the power cable connector on the bottom of the Vehicle
Dock. See instructions included with the applicable Power Cable Kit for detail.
3Connect data cables if applicable.
• Five (5) volts DC is provided on the RS232 serial connector to power selected
Intermec tethered scanners.
• The USB Adapter Cable (p/n: 236-051-001) is required to connect a standard
USB-A male cable to the Intermec special connector.
• This cable is required only if you want to attach a USB device.
Cable Connectors
Installing Your CK60 into the CK60
Vehicle Dock
1 Using your thumb, press the CK60 Handheld Computer release button to lift up
the retaining bar.
2Line the CK60 Handheld Computer over the docking connector and push your
CK60 down until it is securely seated on the connector.
3Position your hand in the middle of the Retaining Bar and push down to secure
the CK60 Handheld Computer. Power is provided to your CK60 Handheld Com-
puter only when the retaining bar is secured.
Removing Your CK60 from the CK60 Vehi-
cle Dock
1 Using your thumb, press the CK60 Handheld Computer release button.
2Lift the CK60 Handheld Computer straight up from the connector.
Vehicle power
Serial connector
USB micro DB9 connector
source connector
CK60 Vehicle Dock Bottom View
Retaining bar must be depressed and engaged to properly secure your
CK60 Handheld Computer before moving your vehicle. Failure to secure
your CK60 Handheld Computer could result in serious injury.
Handheld retaining bar
Press with your thumb
Push down in middle to properly secure CK60 in bay
to release button
Handheld retaining bar
assembly
Release button
CK30 Handheld Computer Quick Start Guide
CK60 Vehicle Dock Installation Instructions
Inhaltsverzeichnis
Andere Intermec Dockingstation Handbücher
Intermec
Intermec PEN*KEY 6100 Bedienungsanleitung
Intermec
Intermec CN3 Series Bedienungsanleitung
Intermec
Intermec FlexDock Bedienungsanleitung
Intermec
Intermec AD10 Bedienungsanleitung
Intermec
Intermec FlexDock DX1 Bedienungsanleitung
Intermec
Intermec CK61 Bedienungsanleitung
Intermec
Intermec 6300 SERIES Bedienungsanleitung
Intermec
Intermec PEN*KEY 6400 Bedienungsanleitung
Intermec
Intermec AV6 Bedienungsanleitung
Intermec
Intermec CN4 Bedienungsanleitung
Intermec
Intermec AD11 Bedienungsanleitung
Intermec
Intermec CN3 Series Bedienungsanleitung
Intermec
Intermec CN3 Series Bedienungsanleitung
Intermec
Intermec AV4 Bedienungsanleitung
Intermec
Intermec AD2 Bedienungsanleitung
Intermec
Intermec AV5 Bedienungsanleitung
Intermec
Intermec D5020 Kurzanleitung
Intermec
Intermec 700 Series Bedienungsanleitung
Intermec
Intermec 700 Series 700 Bedienungsanleitung
Intermec
Intermec AV8 Bedienungsanleitung
