Intermec CN2 Bedienungsanleitung

Specifications

Dimensions: Approximately 12 cm x 8.5 cm x

12 cm (4.7 in x 3.3 in x 4.7 in)

Electrical rating: x5V 2A

Requires Intermec AC power supply

(P/N 074246)

v100 to 240V, 50-60 Hz

Operating temperature: 0°C to 50°C (32°F to 122°F)

Storage temperature: -10°C to 50°C (14°F to 122°F)

Relative humidity: 5% to 95% non-condensing

6001 36th Avenue West

Everett, WA 98203

U.S.A.

www.intermec.com

CN2 Communications Dock Quick Start Guide

*074755-001*

P/N 074755-001

CN2 Communications Dock Quick Start Guide

You can use the CN2 Communications Dock (P/N 074248) to:

• provide power to the CN2.

• charge the battery while it is in the CN2.

• transfer data and applications through a USB (universal serial

bus) Type B connection.

This guide describes how to install and use the communications

dock.

Communications dock

CN2Communications Dock QuickStart Guide

Documentation

Shipping Package Contents: This illustration shows the contents of the CN2

communications dock kit.

To use the communications dock you also need these items (sold

and ordered separately):

• USB interface cable (P/N 321-576-002)

• Power supply (P/N 074246)

• Country-specific power cord

You must use the appropriate Intermec power

supply with this device or equipment damage may

occur.

Installing the Communications Dock

1 Place the communications dock on a flat, stable, and clean

surface that is within 1.5 m (5 ft) of an AC outlet.

2 Connect the power supply to the Power port on the back of

the communications dock.

Power

port

USB

port

3 Connect the other end of the power supply to an AC power

outlet.

Power

supply

Power light

The green Power light on the front of the communications

dock turns on. The communications dock is now ready to

charge a battery in a CN2.

Note: The light on the left side of the communications

dock is not used.

4 (Optional) Connect a USB Type B communications cable to

the USB port on the back of the communications dock and

connect the other end of the cable to a USB device.

Charging the CN2

• Remove the serial port plug from the serial port, and place the

CN2 in the communications dock. The battery is fully charged

in approximately 4 hours.

Troubleshooting

If you are having problems operating the communications dock,

make sure that the:

• battery is correctly installed in the CN2.

• CN2 is firmly seated in the communications dock.

• power supply is properly connected to a powered AC outlet.

• charging pins on the communications dock are clean. To clean

the charging pins, rub them with a pencil eraser and remove

any eraser debris.

USB Port Pin Assignments

VBUS

UDC-

UDC

GND

Andere Handbücher für CN2

Dieses Handbuch passt für folgende Modelle

Andere Intermec Dockingstation Handbücher

Intermec

Intermec AV6 Bedienungsanleitung

Intermec

Intermec 6640 Bedienungsanleitung

Intermec

Intermec FlexDock DX1 Bedienungsanleitung

Intermec

Intermec PEN*KEY 6100 Bedienungsanleitung

Intermec

Intermec AD8 Bedienungsanleitung

Intermec

Intermec CN2 Bedienungsanleitung

Intermec

Intermec 6300 SERIES Bedienungsanleitung

Intermec

Intermec CK3 Series Bedienungsanleitung

Intermec

Intermec AV6 Bedienungsanleitung

Intermec

Intermec CN3 Series Bedienungsanleitung

Intermec

Intermec AV10 Bedienungsanleitung

Intermec

Intermec AV11 Bedienungsanleitung

Intermec

Intermec CN3 Series Bedienungsanleitung

Intermec

Intermec AD8 Bedienungsanleitung

Intermec

Intermec AD2 Bedienungsanleitung

Intermec

Intermec Janus 2020 Bedienungsanleitung

Intermec

Intermec AD3 Handbuch

Intermec

Intermec AV8 Bedienungsanleitung

Intermec

Intermec AV6 Bedienungsanleitung

Intermec

Intermec CN2A Bedienungsanleitung

Intermec

Intermec AV8 Bedienungsanleitung

Intermec

Intermec FlexDock DX1 Bedienungsanleitung

Intermec

Intermec AD2 Bedienungsanleitung

Intermec

Intermec CK60 Vehicle Dock Bedienungsanleitung

Beliebte Dockingstation Handbücher anderer Marken

Sony

Sony Dream Machine XDR-DS12iP Bedienungsanleitung

Acer

Acer USB Type-C Dock II Bedienungsanleitung

ATEN

ATEN UC-2000 Bedienungsanleitung

Xcellon

Xcellon HDD-202 Bedienungsanleitung

Dok

Dok CR09 Bedienungsanleitung

Philips

Philips BTM630/12 Bedienungsanleitung

IOGear

IOGear Travel Pro GUD3C09 Bedienungsanleitung

RKI

RKI SDM-E2 Bedienungsanleitung

iHome

iHome iP15 Bedienungsanleitung

VITURE ONE

VITURE ONE MOBILE DOCK Bedienungsanleitung

Lindy

Lindy 42984 Bedienungsanleitung

CipherLab

CipherLab 8001 Bedienungsanleitung

Pyle

Pyle PIPDSP2 Bedienungsanleitung

Avol

Avol AS2350 Bedienungsanleitung

Datalogic

Datalogic JoyaTouch Bedienungsanleitung

Philips

Philips DC190/79 Bedienungsanleitung

Targus

Targus DOCK315EUZ Bedienungsanleitung

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Bedienungsanleitung